diff options
| author | Angelo Rossi <angelo.rossi.homelab@gmail.com> | 2023-06-21 12:04:16 +0000 |
|---|---|---|
| committer | Angelo Rossi <angelo.rossi.homelab@gmail.com> | 2023-06-21 12:04:16 +0000 |
| commit | b18347ffc9db9641e215995edea1c04c363b2bdf (patch) | |
| tree | f3908dc911399f1a21e17d950355ee56dc0919ee /benchmarks/dc49.dat | |
Initial commit.
Diffstat (limited to 'benchmarks/dc49.dat')
| -rw-r--r-- | benchmarks/dc49.dat | 30 |
1 files changed, 30 insertions, 0 deletions
diff --git a/benchmarks/dc49.dat b/benchmarks/dc49.dat new file mode 100644 index 0000000..68d4d2a --- /dev/null +++ b/benchmarks/dc49.dat @@ -0,0 +1,30 @@ +BEGIN NEW DATA CASE
+C BENCHMARK DC-49
+C Companion case to DC-32, which had MEMSAV=1 use. Development was first
+C documented in Volume X EMTP Memoranda, 3 July 1980, Pagination MSDO.
+C Node LOADA has a one-ohm resistor connected to FAULT, and this in turn
+C is connected to ground via switch number one. This fault switch was open
+C during DC-32, but will here be closed at 12 msec (the 1st step beyond
+C the backed-off switching time of 11.99 msec).
+C $OPEN, UNIT=22 FILE=dc32to49.bin STATUS=OLD FORM=UNFORMATTED ! { (hold case)
+$OPEN, UNIT=LUNIT2 FILE=dc32.bin STATUS=OLD FORM=UNFORMATTED ! { (hold case)
+START AGAIN
+ 1 .011990
+ 9999
+$CLOSE, UNIT=LUNIT2 STATUS=KEEP
+$OPEN, UNIT=LUNIT2 STATUS=SCRATCH FORM=UNFORMATTED
+MISCELLANEOUS DATA CARDS
+ .000020 .018 .010
+ 1 1 0 0 1 0 0 2
+$OPEN, UNIT=LUNIT4 FILE=dc32.pl4 STATUS=APPEND ! { C-like usage adds at end
+C The following step numbers are a continuation of DC-32, which simulated
+C 500 steps (DELTAT = 20 microseconds, TMAX = 10 milliseconds).
+CHANGE PRINTOUT FREQUENCY
+ 500 1 502 2 510 10 550 50
+TIME STEP LOOP
+ PRINTER PLOT
+ 144 1. 10. 18. LOADA LOADB { Axis limits: (-2.784, 1.443)
+BLANK card ending plot cards
+BEGIN NEW DATA CASE
+BLANK
+
|