From b18347ffc9db9641e215995edea1c04c363b2bdf Mon Sep 17 00:00:00 2001 From: Angelo Rossi Date: Wed, 21 Jun 2023 12:04:16 +0000 Subject: Initial commit. --- benchmarks/dc49.dat | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644 benchmarks/dc49.dat (limited to 'benchmarks/dc49.dat') diff --git a/benchmarks/dc49.dat b/benchmarks/dc49.dat new file mode 100644 index 0000000..68d4d2a --- /dev/null +++ b/benchmarks/dc49.dat @@ -0,0 +1,30 @@ +BEGIN NEW DATA CASE +C BENCHMARK DC-49 +C Companion case to DC-32, which had MEMSAV=1 use. Development was first +C documented in Volume X EMTP Memoranda, 3 July 1980, Pagination MSDO. +C Node LOADA has a one-ohm resistor connected to FAULT, and this in turn +C is connected to ground via switch number one. This fault switch was open +C during DC-32, but will here be closed at 12 msec (the 1st step beyond +C the backed-off switching time of 11.99 msec). +C $OPEN, UNIT=22 FILE=dc32to49.bin STATUS=OLD FORM=UNFORMATTED ! { (hold case) +$OPEN, UNIT=LUNIT2 FILE=dc32.bin STATUS=OLD FORM=UNFORMATTED ! { (hold case) +START AGAIN + 1 .011990 + 9999 +$CLOSE, UNIT=LUNIT2 STATUS=KEEP +$OPEN, UNIT=LUNIT2 STATUS=SCRATCH FORM=UNFORMATTED +MISCELLANEOUS DATA CARDS + .000020 .018 .010 + 1 1 0 0 1 0 0 2 +$OPEN, UNIT=LUNIT4 FILE=dc32.pl4 STATUS=APPEND ! { C-like usage adds at end +C The following step numbers are a continuation of DC-32, which simulated +C 500 steps (DELTAT = 20 microseconds, TMAX = 10 milliseconds). +CHANGE PRINTOUT FREQUENCY + 500 1 502 2 510 10 550 50 +TIME STEP LOOP + PRINTER PLOT + 144 1. 10. 18. LOADA LOADB { Axis limits: (-2.784, 1.443) +BLANK card ending plot cards +BEGIN NEW DATA CASE +BLANK + -- cgit v1.2.3