diff options
| author | Angelo Rossi <angelo.rossi.homelab@gmail.com> | 2023-06-21 12:04:16 +0000 |
|---|---|---|
| committer | Angelo Rossi <angelo.rossi.homelab@gmail.com> | 2023-06-21 12:04:16 +0000 |
| commit | b18347ffc9db9641e215995edea1c04c363b2bdf (patch) | |
| tree | f3908dc911399f1a21e17d950355ee56dc0919ee /benchmarks/dc3.dat | |
Initial commit.
Diffstat (limited to 'benchmarks/dc3.dat')
| -rw-r--r-- | benchmarks/dc3.dat | 633 |
1 files changed, 633 insertions, 0 deletions
diff --git a/benchmarks/dc3.dat b/benchmarks/dc3.dat new file mode 100644 index 0000000..e815f0b --- /dev/null +++ b/benchmarks/dc3.dat @@ -0,0 +1,633 @@ +BEGIN NEW DATA CASE
+$BEGIN PL4 COMMENTS
+C BENCHMARK DC-3
+C Energization of 180-mile 3-phase line represented by 18 identical
+C Pi-sections. Transposed at 60 and 120 miles, note. XOPT = 3000.
+c Note nice DELTAT. For exact "M39." agreement, use 0.4630E-4
+c It is test case DC-54 that uses the plot file for "REPLOT" usage.
+c Note this and preceding 2 comment cards illustrate lower-case "$$
+C c" (the third letter of the alphabet). End comment text.
+$END PL4 COMMENTS
+CHANGE PLOT FREQUENCY
+C Beginning 21 March 2010, the ten integers that define either plotting or
+C printing frequency may be keyed as a mixture of I8 and E8.0 FORMAT. There
+C exist several special cases, however, for large values. Interpretation will
+C continue to use 6I6 integers if all can be encoded this way. Examples follow:
+ 5 5 10 1 { The original alternative has all integers
+C Interpretation of this: Plot out : 5 5 10 1 0 0 | ...
+C 5 5.E0 10 1 1.E4 9.E5 { Near the limit of interpret
+C Interpretation of this: Plot out : 5 5 10 1 10000900000 | ...
+C 5 5.E0 10 1 1.E4 1.E9 { Too big a value for interpret
+C Interpretation of this: 5 pairs. But a value is too big for I6 display. | ...
+C 5 5.E0 10 1 1.E4 2.E9 { Verify largest 32-bit integer
+C Interpretation of this: 5 pairs. But a value is too big for I6 display. | ...
+C 5 5.E0 10 1 1.E4 2.1E9 { Too big a value for 32 bits
+C rejection of this: === Error defining one or more integers of printing or
+C plotting frequency. Too big for 32-bit integer storage. Halt in SUBR1.
+CUSTOM PLOT FILE { Request for REAL*8 .PL4 file (see July, 1995, newsletter)
+$MONITOR { Request time (no other special effect, since not LUNIT6 to disk)
+C DISK PLOT DATA { Toggle the Apollo default of LUNIT4 = -4 to +4 (use disk)
+C $CLOSE, UNIT=4 STATUS=DELETE { Destroy empty date/time plot file of "SYSDEP"
+C $OPEN, UNIT=4 FILE=dc3to54.pl4 FORM=UNFORMATTED STATUS=UNKNOWN RECL=8000 !
+C$ text Beginning 31 August 1994, "C$" in columns 1-2 is taken to be a comment
+PRINTED NUMBER WIDTH, 13, 2,
+ .000050 .010 3000. { XOPT = 3 KHz means reactance in ohms at this freq.
+C 1 1 1 1 1 -1 0 2
+ 1.E0 1.E0 1 1 1 -1 0 2
+C The preceding integer misc. data card illustrates that either the number
+C of steps for printing (cols. 1-8) or the number of steps for plotting
+C (cols. 9-16) may be E-field. This is to accomodate values > 1.E8.
+C See previous explanation of CHANGE PLOT FREQUENCY. The same procedure is
+C applicable to the following card, which modifies printout frequency:
+C 5 5 10 10 20 20 { Escalating printout frequency
+ 5 5.E0 1.E1 10 2.E1 20 { Illustrate some E-field use
+$COMMENT { Begin discarding (making invisible) all comment cards
+C Ok, immediately we have a comment card, which should not be seen on LUNIT6
+ 1GEN-A 1-A 34.372457.68.15781
+ 2GEN-B 1-B 35.735164.43-.031538.002451.79.16587
+ 3GEN-C 1-C 35.735164.43-.031537.455151.72-.021938.002451.79.16587
+C 2nd comment card. This, too, should not be seen on LUNIT6
+$COMMENT { End discarding of comment cards. Once again such cards are visible
+C Is this comment card visible? It should be seen on LUNIT6
+ 11-A 2-A GEN-A 1-A { Sections 2 through 18 are copies of the first
+ 21-B 2-B { which has just been inputted.
+ 31-C 2-C
+ 12-A 3-A GEN-A 1-A
+ 22-B 3-B
+ 32-C 3-C
+ 13-A 4-A GEN-A 1-A
+ 23-B 4-B
+ 33-C 4-C
+ 14-A 5-A GEN-A 1-A
+ 24-B 5-B
+ 34-C 5-C
+ 15-A 6-A GEN-A 1-A
+ 25-B 6-B
+ 35-C 6-C
+ 16-C 7-C GEN-A 1-A { Note transposition: /C/A/B/ rather than /A/B/C
+ 26-A 7-A
+ 36-B 7-B
+ 17-C 8-C GEN-A 1-A
+ 27-A 8-A
+ 37-B 8-B
+ 18-C 9-C GEN-A 1-A
+ 28-A 9-A
+ 38-B 9-B
+ 19-C 10-C GEN-A 1-A
+ 29-A 10-A
+ 39-B 10-B
+ 110-C 11-C GEN-A 1-A
+ 210-A 11-A
+ 310-B 11-B
+ 111-C 12-C GEN-A 1-A
+ 211-A 12-A
+ 311-B 12-B
+ 112-B 13-B GEN-A 1-A { Note 2nd transposition: /B/C/A/ rather than /C/A/B
+ 212-C 13-C
+ 312-A 13-A
+ 113-B 14-B GEN-A 1-A
+ 213-C 14-C
+ 313-A 14-A
+ 114-B 15-B GEN-A 1-A
+ 214-C 15-C
+ 314-A 15-A
+ 115-B 16-B GEN-A 1-A
+ 215-C 16-C
+ 315-A 16-A
+ 116-B 17-B GEN-A 1-A
+ 216-C 17-C
+ 316-A 17-A
+ 117-B 18-B GEN-A 1-A
+ 217-C 18-C
+ 317-A 18-A
+ 0M-A GEN-A 400.0 { 400 Ohm closing resistors, to be shorted by
+ 0M-B GEN-B 400.0 { breaker poles at times 9.98, 14, and 14
+ 0M-C GEN-C 400.0 { msec, respectively.} 1
+ 0POLE-AM-A 15.0
+ 0POLE-BM-B 15.0
+ 0POLE-CM-C 15.0
+BLANK card ending branch cards
+ E-A POLE-A 0. 20.0 1
+ E-B POLE-B 0.00398 20.0 { Closing will be at 4.0 msec, all computer } 3
+ E-C POLE-C 0.00398 20.0 { This backoff from 4.0 was needed by PRIME } 1
+ M-A GEN-A 0.00998 20.0 { Breaker poles across 400 Ohm closing
+ M-B GEN-B 0.013998 20.0 { resistors. Note artificial opening
+ M-C GEN-C 0.013998 20.0 { time (in fact, there is no opening).
+BLANK card ending switches
+14E-A -1.0 60.0 -90.0
+14E-B -1.0 60.0 -210.0
+14E-C -1.0 60.0 30.0
+BLANK card ending sources
+ 18-C 18-B 18-A
+$MONITOR { Request time (no other special effect, since not LUNIT6 to disk)
+C Step Time E-B 18-C 18-B 18-A E-A
+C POLE-B POLE-A
+C *** Switch "E-A " to "POLE-A" closed after 0.00000000E+00 sec.
+C 0 0.0 0.0 0.0 0.0 0.0 0.0
+C 1 .5E-4 .8771390038 .735053E-17 .754138E-17 -.12623E-16 -.277151E-4
+C 2 .1E-3 .8898949351 .408898E-15 .419476E-15 -.70276E-15 -.42636E-4
+C 3 .15E-3 .9023577997 .111958E-13 .114844E-13 -.19259E-13 -.657706E-4
+C 4 .2E-3 .9141912694 .201088E-12 .206252E-12 -.34623E-12 -.902274E-4
+C 5 .25E-3 .9254563554 .266406E-11 .273221E-11 -.45918E-11 -.11094E-3
+C 10 .5E-3 .9821092355 .5616974E-7 .5757735E-7 -.975638E-7 -.211746E-3
+C 20 .001 1.079796132 .0030080496 .0030756136 -.005532677 -.393566E-3
+BLANK card ending output variables requests (node voltages, here)
+$MONITOR { Request time (no other special effect, since not LUNIT6 to disk)
+C Final step: 200 .01 0.0 .7226176276 -.887792385 .0782571591
+C Final step continued: .0011948668 -.449544E-3 -.687051E-3 -.687051E-3
+C Variable max : 1.188718074 .8796065581 .1512528782 .0782571591 .0012022221
+C Times of max : .002 .0085 .00525 .01 .00995
+C Variable min : 0.0 -.133205909 -.887792385 -1.27643205 -.79278E-3
+C Times of min : 0.0 .0048 .01 .00525 .0041
+ PRINTER PLOT
+ 144 1. 0.0 10. 18-A 18-B 18-C { Axis limits: (-1.276, 0.880)
+ 194 1. 0.0 10. GEN-C M-C E-A POLE-A { Axis limits: (-1.105, 1.202)
+BLANK card ending plot cards
+BEGIN NEW DATA CASE
+C 2nd of 6 subcases illustrates $PI which becomes available 14 July 2001.
+C This is for scaling Pi-circuit data -- in effect, varying the length of
+C the Pi-circuits. Originator of the idea was Dr. Sven Demmig of Bewag
+C (power utility of city of Berlin, Germany) as explained in the October,
+C 2001 newsletter. Although a cascade connection of sections is typical,
+C in fact there is no mandatory association of $PI and cascading. In this
+C illustration, consider 4 different and disconnected cascade connections
+C of 2 Pi-circuits. The first is unscaled whereas the following 3 involve
+C different combinations of scaling. All 4 disconnected subnetworks give
+C exactly the same answer because data is either normal or multiplied by
+C 2; and if the later, it subsequently is scaled by 1/2, thereby restoring
+C the original values.
+POWER FREQUENCY 3000. { Avoid warning about unusual XOPT
+PRINTED NUMBER WIDTH, 11, 2,
+ .000050 .005 3000. { XOPT = 3 KHz means reactance in ohms at this freq.
+ 1 1 1 1 1 -1
+ 5 5 10 10 20 20 { Escalating printout frequency
+C Begin cascading of 3-phase Pi-circuits from DC-3. To establish the right
+C answer, we define data params using the 1st section, and then use reference
+C branch for the second. So, a total of 6 cells are occupied in List 3:
+ 1GENA MIDA 34.372457.68.15781
+ 2GENB MIDB 35.735164.43-.031538.002451.79.16587
+ 3GENC MIDC 35.735164.43-.031537.455151.72-.021938.002451.79.16587
+ 1MIDA ENDA GENA MIDA
+ 2MIDB ENDB
+ 3MIDC ENDC
+C Preceding establishes right answer without scaling. Next, scale. There are
+C 3 illustrations. Each is a disconnected circuit that should give the same
+C answer as the first. Each of the copies uses scaling in a different way.
+C Begin with Pi-circuit data that is double what it should be, so will require
+C a scaling factor of a half. Like preceding, this occupies 6 cells of List 3:
+$PI, 0.5, { Multiply R, L, and C values of Pi-circuits by this factor
+ 1GENA MIDD 68.744915.36.31562
+ 2GENB MIDE 71.470328.86-.063076.004903.58.33174
+ 3GENC MIDF 71.470328.86-.063074.910303.44-.043876.004903.58.33174
+$PI, 1.0, { Cancel preceding scaling; return to normal, unscaled use
+ 1MIDD ENDD GENA MIDD
+ 2MIDE ENDE
+ 3MIDF ENDF
+C 2nd of 3 alternatives to the original circuit will define but not use the
+C doubled data. Nothing else will be connected to far end (MIDG, H, I).
+C Instead, the alternative will consist of 2 scaled copies of this data.
+C That makes a total of 3 copies of data, so 18 cells of List 3 are occupied:
+ 1GENA MIDG 68.744915.36.31562
+ 2GENB MIDH 71.470328.86-.063076.004903.58.33174
+ 3GENC MIDI 71.470328.86-.063074.910303.44-.043876.004903.58.33174
+$PI, 0.5, { Multiply R, L, and C values of Pi-circuits by this factor
+ 1GENA MIDJ GENA MIDG
+ 2GENB MIDK
+ 3GENC MIDL
+ 1MIDJ ENDJ GENA MIDG
+ 2MIDK ENDK
+ 3MIDL ENDL
+C 3rd of 3 alternatives begins (1st half) the same as the preceding second,
+C but it ends with the 2nd section a copy of this 1st section. This adds 6
+C more cells for List 3 (for the 1st section only). So, the total burden on
+C List 3 is the sum of the 4 parts: 6 + 6 + 18 + 6 = 36 cells.
+ 1GENA MIDM GENA MIDG
+ 2GENB MIDN
+ 3GENC MIDO
+$PI, 1.0, { Cancel preceding scaling; return to normal, unscaled use
+ 1MIDM ENDM GENA MIDM
+ 2MIDN ENDN
+ 3MIDO ENDO
+BLANK card ending branch cards
+BLANK card ending switches
+C 14GENA -1.0 60.0 -90.0
+C Note we omit phase "a" (preceding source) to produce great imbalance. Also,
+C we will add a steady-state solution, for more generality. As a result, the
+C simulation should be pursely sinusoidal. If PRINTER PLOT below is changed
+C to CALCOMP PLOT & HPI = 1. msec/inch is changed to .5 (columns 6-7),
+C this will be obvious visually.
+14GENB -1.0 60.0 -210.0 -1.
+14GENC -1.0 60.0 30.0 -1.
+$WIDTH, 79, { Request narrow, 80-column LUNIT6 output to minimize phasor print
+BLANK card ending sources
+C Total network loss P-loss by summing injections = 5.813026183430E-07
+C GENB 1.0 .6605121612E-3 -.4572787068E-4 .3302560806E-3
+C -30.0000000 67.9588504 -.3270749771E-3 -0.1384619
+$WIDTH, 132, { Done with 80 columns, so return to wide, 132-column LUNIT6 output
+ ENDA ENDD ENDJ ENDM ENDB ENDE ENDK ENDN ENDC
+C Step Time ENDA ENDD ENDJ ENDM ENDB ENDE ENDK ENDN ENDC
+C 0 0.0 -.0023158 -.0023158 -.0023158 -.0023158 .86301625 .86301625 .86301625 .86301625 -.8705073
+C 1 .5E-4 .00145168 .00145168 .00145168 .00145168 .87229895 .87229895 .87229895 .87229895 -.8609192
+C 2 .1E-3 .00521861 .00521861 .00521861 .00521861 .88127179 .88127179 .88127179 .88127179 -.8510252
+C 3 .15E-3 .00898371 .00898371 .00898371 .00898371 .88993164 .88993164 .88993164 .88993164 -.8408287
+BLANK card ending output variables requests (node voltages, here)
+C 100 .005 .19079849 .19079849 .19079849 .19079849 .20945009 .20945009 .20945009 .20945009 .74501057
+C Variable maxima: .19987826 .19987826 .19987826 .19987826 .99771368 .99771368 .99771368 .99771368 .74501057
+C Times of maxima: .0042 .0042 .0042 .0042 .0014 .0014 .0014 .0014 .005
+C Variable minima: -.0023158 -.0023158 -.0023158 -.0023158 .20945009 .20945009 .20945009 .20945009 -.8705073
+C Times of minima: 0.0 0.0 0.0 0.0 .005 .005 .005 .005 0.0
+ PRINTER PLOT { Conversion to CALCOMP PLOT would show that curves are smooth
+ 144 1. 0.0 5.0 -1. 1.0 ENDA ENDB ENDC
+BLANK card ending plot cards
+BEGIN NEW DATA CASE
+C 3rd of 6 subcases illustrates HIGH ORDER PI CIRCUIT as first mentioned
+C in the April, 1998, newsletter. Prior to addition on 22 November 2001,
+C this data was stored at home as f:\data\highpi.dat Data of this
+C subcase is identical to the first; the solution should be identical.
+C But instead of data for the 1st Pi-circuit being read from in-line card
+C images, it is to be read from a separate disk file. Of course, for 3
+C phases, this is artificially complicated. But for really high order
+C (e.g., 400), there should be a big saving when the C-like alternative is
+C used. But here, initially, we just illustrate the universal, FORMATTED
+C alternative, which stores Pi-circuit data in separate DC3HIGH.DAT The
+C use is artificial. Practical use almost always will be C-like.
+PRINTED NUMBER WIDTH, 13, 2,
+ .000050 .010 3000. { XOPT = 3 KHz means reactance in ohms at this freq.
+ 1 1 0 0 0 -1
+ 5 5 10 10 20 20 { Escalating printout frequency
+C 1GEN-A 1-A 34.372457.68.15781
+C 2GEN-B 1-B 35.735164.43-.031538.002451.79.16587
+C 3GEN-C 1-C 35.735164.43-.031537.455151.72-.021938.002451.79.16587
+C The following is FORMATTED. For the C-like alternative, see the 4th subcase.
+C HIGH ORDER PI CIRCUIT 3 File=[]dc3high.dat FORM=FORMATTED C-LIKE OUTPUT
+C Preceding single card is replaced by following 2-card alternative on
+C 9 September 2003. Not only was C-LIKE OUTPUT being chopped on the
+C right, there was no space for additional attributes such as REAL*4
+C for single-precision data and $UNITS to apply XOPT and COPT. So now
+C 2 or more cards are allowed. Only the last is to carry the file name
+C after the File= tag. Tags on the optional preface card are free-
+C format but they must be to the right of column 32 (for # of phases):
+ HIGH ORDER PI CIRCUIT FORM=FORMATTED C-LIKE OUTPUT { Optional card
+ HIGH ORDER PI CIRCUIT 3 File=[]dc3high.dat
+C Note that preceding creates REAL*8 output file dc3high.clk by default.
+C The alternative single-precision file dc3high.444 which will be used in
+C the following subcase # 5 was created by adding REAL*4 anywhere to the
+C right of the input data file name (separate by 1 or more blanks). The
+C resulting file then will be 108 bytes in size rather than 180. The
+C difference is 3 arrays * 6 elements/array * 4 bytes/element = 72 bytes.
+C But 5th subcase also used $UNITS and this requires a change in the code
+C see comments near the bottom of SUBR3.SPL
+ 11-A 2-A GEN-A 1-A { Sections 2 through 18 are copies of the first
+ 21-B 2-B { which has just been inputted.
+ 31-C 2-C
+ 12-A 3-A GEN-A 1-A
+ 22-B 3-B
+ 32-C 3-C
+ 13-A 4-A GEN-A 1-A
+ 23-B 4-B
+ 33-C 4-C
+ 14-A 5-A GEN-A 1-A
+ 24-B 5-B
+ 34-C 5-C
+ 15-A 6-A GEN-A 1-A
+ 25-B 6-B
+ 35-C 6-C
+ 16-C 7-C GEN-A 1-A { Note transposition: /C/A/B/ rather than /A/B/C
+ 26-A 7-A
+ 36-B 7-B
+ 17-C 8-C GEN-A 1-A
+ 27-A 8-A
+ 37-B 8-B
+ 18-C 9-C GEN-A 1-A
+ 28-A 9-A
+ 38-B 9-B
+ 19-C 10-C GEN-A 1-A
+ 29-A 10-A
+ 39-B 10-B
+ 110-C 11-C GEN-A 1-A
+ 210-A 11-A
+ 310-B 11-B
+ 111-C 12-C GEN-A 1-A
+ 211-A 12-A
+ 311-B 12-B
+ 112-B 13-B GEN-A 1-A { Note 2nd transposition: /B/C/A/ rather than /C/A/B
+ 212-C 13-C
+ 312-A 13-A
+ 113-B 14-B GEN-A 1-A
+ 213-C 14-C
+ 313-A 14-A
+ 114-B 15-B GEN-A 1-A
+ 214-C 15-C
+ 314-A 15-A
+ 115-B 16-B GEN-A 1-A
+ 215-C 16-C
+ 315-A 16-A
+ 116-B 17-B GEN-A 1-A
+ 216-C 17-C
+ 316-A 17-A
+ 117-B 18-B GEN-A 1-A
+ 217-C 18-C
+ 317-A 18-A
+ 0M-A GEN-A 400.0 { 400 Ohm closing resistors, to be shorted by
+ 0M-B GEN-B 400.0 { breaker poles at times 9.98, 14, and 14
+ 0M-C GEN-C 400.0 { msec, respectively.} 1
+ 0POLE-AM-A 15.0
+ 0POLE-BM-B 15.0
+ 0POLE-CM-C 15.0
+BLANK card ending branch cards
+ E-A POLE-A 0. 20.0 1
+ E-B POLE-B 0.00398 20.0 { Closing will be at 4.0 msec, all computer } 3
+ E-C POLE-C 0.00398 20.0 { This backoff from 4.0 was needed by PRIME } 1
+ M-A GEN-A 0.00998 20.0 { Breaker poles across 400 Ohm closing
+ M-B GEN-B 0.013998 20.0 { resistors. Note artificial opening
+ M-C GEN-C 0.013998 20.0 { time (in fact, there is no opening).
+BLANK card ending switches
+14E-A -1.0 60.0 -90.0
+14E-B -1.0 60.0 -210.0
+14E-C -1.0 60.0 30.0
+BLANK card ending sources
+ 18-C 18-B 18-A
+BLANK card ending output variables requests (node voltages, here)
+C 100 .005 0.0 -.084110964 -.076310793 -.92825821 -.621001E-3 .1845237E-3 .9370288E-3 .9370288E-3
+C 120 .006 0.0 .4539217657 .0096691741 -1.01404035 -.10259E-3 -.52007E-3 .0010499755 .0010499755
+C 140 .007 0.0 .6915082663 -.20985407 -.843083014 .6173076E-3 -.951807E-3 .5938305E-3 .5938305E-3
+C 160 .008 0.0 .8512280695 -.465621295 -.605281204 .9350157E-3 -.96575E-3 .1846072E-3 .1846072E-3
+C 180 .009 0.0 .8583902573 -.70840222 -.288190483 .0011711805 -.794874E-3 -.285103E-3 -.285103E-3
+C *** Close switch "M-A " to "GEN-A " after 1.00000000E-02 sec.
+C 200 .01 0.0 .7226176276 -.887792385 .0782571591 .0011948668 -.449544E-3 -.687051E-3 -.687051E-3
+ PRINTER PLOT
+BLANK card ending plot cards
+BEGIN NEW DATA CASE
+C 4th of 6 subcases is the same as the preceding 3rd subcase except for
+C two changes. First and most importantly, the C-like alternative is used
+C for the data rather than the FORMATTED alternative. Second, the ending
+C time T-max has been halved. Solution through T = T-max is identical.
+PRINTED NUMBER WIDTH, 13, 2,
+ .000050 .005 3000. { XOPT = 3 KHz means reactance in ohms at this freq.
+ 1 1 0 0 0 -1
+ 5 5 10 10 20 20 { Escalating printout frequency
+C 1GEN-A 1-A 34.372457.68.15781
+C 2GEN-B 1-B 35.735164.43-.031538.002451.79.16587
+C 3GEN-C 1-C 35.735164.43-.031537.455151.72-.021938.002451.79.16587
+ HIGH ORDER PI CIRCUIT 3 File=[]dc3high.clk { Use default type: C-like
+ 11-A 2-A GEN-A 1-A { Sections 2 through 18 are copies of the first
+ 21-B 2-B { which has just been inputted.
+ 31-C 2-C
+ 12-A 3-A GEN-A 1-A
+ 22-B 3-B
+ 32-C 3-C
+ 13-A 4-A GEN-A 1-A
+ 23-B 4-B
+ 33-C 4-C
+ 14-A 5-A GEN-A 1-A
+ 24-B 5-B
+ 34-C 5-C
+ 15-A 6-A GEN-A 1-A
+ 25-B 6-B
+ 35-C 6-C
+ 16-C 7-C GEN-A 1-A { Note transposition: /C/A/B/ rather than /A/B/C
+ 26-A 7-A
+ 36-B 7-B
+ 17-C 8-C GEN-A 1-A
+ 27-A 8-A
+ 37-B 8-B
+ 18-C 9-C GEN-A 1-A
+ 28-A 9-A
+ 38-B 9-B
+ 19-C 10-C GEN-A 1-A
+ 29-A 10-A
+ 39-B 10-B
+ 110-C 11-C GEN-A 1-A
+ 210-A 11-A
+ 310-B 11-B
+ 111-C 12-C GEN-A 1-A
+ 211-A 12-A
+ 311-B 12-B
+ 112-B 13-B GEN-A 1-A { Note 2nd transposition: /B/C/A/ rather than /C/A/B
+ 212-C 13-C
+ 312-A 13-A
+ 113-B 14-B GEN-A 1-A
+ 213-C 14-C
+ 313-A 14-A
+ 114-B 15-B GEN-A 1-A
+ 214-C 15-C
+ 314-A 15-A
+ 115-B 16-B GEN-A 1-A
+ 215-C 16-C
+ 315-A 16-A
+ 116-B 17-B GEN-A 1-A
+ 216-C 17-C
+ 316-A 17-A
+ 117-B 18-B GEN-A 1-A
+ 217-C 18-C
+ 317-A 18-A
+ 0M-A GEN-A 400.0 { 400 Ohm closing resistors, to be shorted by
+ 0M-B GEN-B 400.0 { breaker poles at times 9.98, 14, and 14
+ 0M-C GEN-C 400.0 { msec, respectively.} 1
+ 0POLE-AM-A 15.0
+ 0POLE-BM-B 15.0
+ 0POLE-CM-C 15.0
+BLANK card ending branch cards
+ E-A POLE-A 0. 20.0 1
+ E-B POLE-B 0.00398 20.0 { Closing will be at 4.0 msec, all computer } 3
+ E-C POLE-C 0.00398 20.0 { This backoff from 4.0 was needed by PRIME } 1
+ M-A GEN-A 0.00998 20.0 { Breaker poles across 400 Ohm closing
+ M-B GEN-B 0.013998 20.0 { resistors. Note artificial opening
+ M-C GEN-C 0.013998 20.0 { time (in fact, there is no opening).
+BLANK card ending switches
+14E-A -1.0 60.0 -90.0
+14E-B -1.0 60.0 -210.0
+14E-C -1.0 60.0 30.0
+BLANK card ending sources
+ 18-C 18-B 18-A
+BLANK card ending output variables requests (node voltages, here)
+C 80 .004 .8173610312 -.086429015 -.083753604 -.67093214 -.487946E-3 0.0 0.0 .555112E-18
+C 100 .005 0.0 -.084110964 -.076310793 -.92825821 -.621001E-3 .1845237E-3 .9370288E-3 .9370288E-3
+BLANK card ending plot cards
+BEGIN NEW DATA CASE
+C 5th of 6 subcases is the same as the preceding 4th subcase except for
+C two changes. First, single precision is used for the C-like Pi-circuit
+C data rather than the default REAL*8 alternative. Second, XOPT and COPT
+C are to be applied to control units just as for any other branch. Answers
+C are very close (REAL*4 input data change 7th or 8 digit of some numbers).
+PRINTED NUMBER WIDTH, 13, 2,
+ .000050 .005 3000. { XOPT = 3 KHz means reactance in ohms at this freq.
+ 1 1 0 0 0 -1
+ 5 5 10 10 20 20 { Escalating printout frequency
+C 1GEN-A 1-A 34.372457.68.15781
+C 2GEN-B 1-B 35.735164.43-.031538.002451.79.16587
+C 3GEN-C 1-C 35.735164.43-.031537.455151.72-.021938.002451.79.16587
+ HIGH ORDER PI CIRCUIT REAL*4 $UNITS { Optional card of attributes
+C HIGH ORDER PI CIRCUIT REAL*4 { Optional card of attributes
+C HIGH ORDER PI CIRCUIT 3 File=[]dc3high.444
+ HIGH ORDER PI CIRCUIT 3 File=[]dc3high.opt
+ 11-A 2-A GEN-A 1-A { Sections 2 through 18 are copies of the first
+ 21-B 2-B { which has just been inputted.
+ 31-C 2-C
+ 12-A 3-A GEN-A 1-A
+ 22-B 3-B
+ 32-C 3-C
+ 13-A 4-A GEN-A 1-A
+ 23-B 4-B
+ 33-C 4-C
+ 14-A 5-A GEN-A 1-A
+ 24-B 5-B
+ 34-C 5-C
+ 15-A 6-A GEN-A 1-A
+ 25-B 6-B
+ 35-C 6-C
+ 16-C 7-C GEN-A 1-A { Note transposition: /C/A/B/ rather than /A/B/C
+ 26-A 7-A
+ 36-B 7-B
+ 17-C 8-C GEN-A 1-A
+ 27-A 8-A
+ 37-B 8-B
+ 18-C 9-C GEN-A 1-A
+ 28-A 9-A
+ 38-B 9-B
+ 19-C 10-C GEN-A 1-A
+ 29-A 10-A
+ 39-B 10-B
+ 110-C 11-C GEN-A 1-A
+ 210-A 11-A
+ 310-B 11-B
+ 111-C 12-C GEN-A 1-A
+ 211-A 12-A
+ 311-B 12-B
+ 112-B 13-B GEN-A 1-A { Note 2nd transposition: /B/C/A/ rather than /C/A/B
+ 212-C 13-C
+ 312-A 13-A
+ 113-B 14-B GEN-A 1-A
+ 213-C 14-C
+ 313-A 14-A
+ 114-B 15-B GEN-A 1-A
+ 214-C 15-C
+ 314-A 15-A
+ 115-B 16-B GEN-A 1-A
+ 215-C 16-C
+ 315-A 16-A
+ 116-B 17-B GEN-A 1-A
+ 216-C 17-C
+ 316-A 17-A
+ 117-B 18-B GEN-A 1-A
+ 217-C 18-C
+ 317-A 18-A
+ 0M-A GEN-A 400.0 { 400 Ohm closing resistors, to be shorted by
+ 0M-B GEN-B 400.0 { breaker poles at times 9.98, 14, and 14
+ 0M-C GEN-C 400.0 { msec, respectively.} 1
+ 0POLE-AM-A 15.0
+ 0POLE-BM-B 15.0
+ 0POLE-CM-C 15.0
+BLANK card ending branch cards
+ E-A POLE-A 0. 20.0 1
+ E-B POLE-B 0.00398 20.0 { Closing will be at 4.0 msec, all computer } 3
+ E-C POLE-C 0.00398 20.0 { This backoff from 4.0 was needed by PRIME } 1
+ M-A GEN-A 0.00998 20.0 { Breaker poles across 400 Ohm closing
+ M-B GEN-B 0.013998 20.0 { resistors. Note artificial opening
+ M-C GEN-C 0.013998 20.0 { time (in fact, there is no opening).
+BLANK card ending switches
+14E-A -1.0 60.0 -90.0
+14E-B -1.0 60.0 -210.0
+14E-C -1.0 60.0 30.0
+BLANK card ending sources
+ 18-C 18-B 18-A
+BLANK card ending output variables requests (node voltages, here)
+C 80 .004 .8173610397 -.08642902 -.083753607 -.670932147 -.487946E-3 0.0 0.0 .555112E-18
+C 100 .005 0.0 -.084110972 -.076310803 -.928258207 -.621001E-3 .1845237E-3 .9370288E-3 .9370288E-3
+BLANK card ending plot cards
+BEGIN NEW DATA CASE
+C 6th of 6 subcases is the same as the preceding except that the master
+C Pi-circuit is defined in user-supplied SUBROUTINE HOPCOD rather than
+C in the HOPC disk file. The file name must be "File=HOPCOD." where the
+C following file type (001) thus far is being ignored. Later, if 2 or more
+C different definitions might be provided in SUBROUTINE HOPCOD, the file
+C type will allow selection among 999 of them. Since 5th subcase uses
+C REAL*4 data whereas here we use REAL*8 data, expect about 7 digits of
+C agreement in the answers.
+PRINTED NUMBER WIDTH, 13, 2,
+ .000050 .005 3000. { XOPT = 3 KHz means reactance in ohms at this freq.
+ 1 1 0 0 0 -1
+ 5 5 10 10 20 20 { Escalating printout frequency
+C 1GEN-A 1-A 34.372457.68.15781
+C 2GEN-B 1-B 35.735164.43-.031538.002451.79.16587
+C 3GEN-C 1-C 35.735164.43-.031537.455151.72-.021938.002451.79.16587
+ HIGH ORDER PI CIRCUIT 3 File=CODE.001 { Define data in code (not disk)
+ 11-A 2-A GEN-A 1-A { Sections 2 through 18 are copies of the first
+ 21-B 2-B { which has just been inputted.
+ 31-C 2-C
+ 12-A 3-A GEN-A 1-A
+ 22-B 3-B
+ 32-C 3-C
+ 13-A 4-A GEN-A 1-A
+ 23-B 4-B
+ 33-C 4-C
+ 14-A 5-A GEN-A 1-A
+ 24-B 5-B
+ 34-C 5-C
+ 15-A 6-A GEN-A 1-A
+ 25-B 6-B
+ 35-C 6-C
+ 16-C 7-C GEN-A 1-A { Note transposition: /C/A/B/ rather than /A/B/C
+ 26-A 7-A
+ 36-B 7-B
+ 17-C 8-C GEN-A 1-A
+ 27-A 8-A
+ 37-B 8-B
+ 18-C 9-C GEN-A 1-A
+ 28-A 9-A
+ 38-B 9-B
+ 19-C 10-C GEN-A 1-A
+ 29-A 10-A
+ 39-B 10-B
+ 110-C 11-C GEN-A 1-A
+ 210-A 11-A
+ 310-B 11-B
+ 111-C 12-C GEN-A 1-A
+ 211-A 12-A
+ 311-B 12-B
+ 112-B 13-B GEN-A 1-A { Note 2nd transposition: /B/C/A/ rather than /C/A/B
+ 212-C 13-C
+ 312-A 13-A
+ 113-B 14-B GEN-A 1-A
+ 213-C 14-C
+ 313-A 14-A
+ 114-B 15-B GEN-A 1-A
+ 214-C 15-C
+ 314-A 15-A
+ 115-B 16-B GEN-A 1-A
+ 215-C 16-C
+ 315-A 16-A
+ 116-B 17-B GEN-A 1-A
+ 216-C 17-C
+ 316-A 17-A
+ 117-B 18-B GEN-A 1-A
+ 217-C 18-C
+ 317-A 18-A
+ 0M-A GEN-A 400.0 { 400 Ohm closing resistors, to be shorted by
+ 0M-B GEN-B 400.0 { breaker poles at times 9.98, 14, and 14
+ 0M-C GEN-C 400.0 { msec, respectively.} 1
+ 0POLE-AM-A 15.0
+ 0POLE-BM-B 15.0
+ 0POLE-CM-C 15.0
+BLANK card ending branch cards
+ E-A POLE-A 0. 20.0 1
+ E-B POLE-B 0.00398 20.0 { Closing will be at 4.0 msec, all computer } 3
+ E-C POLE-C 0.00398 20.0 { This backoff from 4.0 was needed by PRIME } 1
+ M-A GEN-A 0.00998 20.0 { Breaker poles across 400 Ohm closing
+ M-B GEN-B 0.013998 20.0 { resistors. Note artificial opening
+ M-C GEN-C 0.013998 20.0 { time (in fact, there is no opening).
+BLANK card ending switches
+14E-A -1.0 60.0 -90.0
+14E-B -1.0 60.0 -210.0
+14E-C -1.0 60.0 30.0
+BLANK card ending sources
+ 18-C 18-B 18-A
+BLANK card ending output variables requests (node voltages, here)
+C 80 .004 .8173610312 -.086429015 -.083753604 -.67093214 -.487946E-3 0.0 0.0 .555112E-18
+C 100 .005 0.0 -.084110964 -.076310793 -.92825821 -.621001E-3 .1845237E-3 .9370288E-3 .9370288E-3
+ PRINTER PLOT
+BLANK --- extraneous; added here to prove that one or 2 extras are tolerated
+BLANK --- extraneous; added here to prove that one or 2 extras are tolerated
+BLANK card ending plot cards
+BEGIN NEW DATA CASE
+BLANK
|