diff options
Diffstat (limited to 'benchmarks/dc8.dat')
| -rw-r--r-- | benchmarks/dc8.dat | 153 |
1 files changed, 153 insertions, 0 deletions
diff --git a/benchmarks/dc8.dat b/benchmarks/dc8.dat new file mode 100644 index 0000000..92d7071 --- /dev/null +++ b/benchmarks/dc8.dat @@ -0,0 +1,153 @@ +BEGIN NEW DATA CASE
+C 1st of 2 subcases is added 24 Sept 2001 to illustrate $INCLUDE use within
+C the DO KNT loop. This subcase is related to the 1st subcase of DC-58.
+C It really should have been added as a new 2nd subcase there, but this was
+C not possible since DO KNT is not handled properly if the 2nd or later.
+C This request for $INCLUDE, too, came from Prof. Juan Martinez of UPC in
+C Barcelona, Spain. The $INCLUDE file does not change the answer. I.e.,
+C part of the data of DC-58 simply has been removed and placed in a separate
+C file. Other changes: TMAX has been shortened to speed execution, and
+C there are no extrema. But the resulting DC8.LIS file still compares
+C easily with DC58.LIS using Mike Albert's freeware FC.
+PRINTED NUMBER WIDTH, 13, 2, { Request maximum precision (for 8 output columns)
+ .000050 .005
+ 1 1 1 0 0 -1
+ 33 1 40 10 100 50
+DO KNT=1, 5 /OUTPUT { Loop twice using PCVP index KNT (seen inside $PARAMETER)
+$PARAMETER { This will be serviced by CIMAGE just as any other $-card would be
+_BUS1_ = KNT SERIALIZE 'NODE00'
+_BUS2_ = KNT + 1. SERIALIZE 'NODE00'
+BLANK card ends $PARAMETER definitions that are processed just b4 branch cards
+$INCLUDE, dc8incl0.dat { Disk file containts the following without "C " in 1-2:
+C -1_BUS1__BUS2_ .306 5.82 .012 100. { Half the length of original
+C 92_BUS2_ { Type 92 is for v-i curve } 5555. { 5555 flag is for exponentials } 1
+C C VREF VFLASH VZERO COL
+C 778000. -1.0 0.0 2.0
+C C COEF EXPON VMIN
+C 1250. 26. 0.5
+C 9999. { Bound on exponential segments (only one precedes)
+ENDDO KNT { Termination of DO KNT loop. Note a comment on it is tolerable
+BLANK card terminating branch data
+BLANK card terminating all (in this case, nonexistent) switches
+14NODE01 408000. 60.
+BLANK card ending source data
+ 1
+BLANK card ending plot cards
+BEGIN NEW DATA CASE
+C BENCHMARK DC-8
+C Example drawn from the dynamite EMTP Newsletter article by W. Scott Meyer,
+C "EMTP Data Modularization and Sorting ...," Volume 4, No. 2, Sec. V,
+C November, 1983. $PREFIX and $SUFFIX may be installation-dependent.
+C Miscellaneous data cards and TACS have been added to allow execution
+C to continue through the reading of switch cards, thereby documenting
+C the $INCLUDE evaluation and subsequent sorting. The $INCLUDE file
+C DC8INCL1.DAT was created by first subcase of companion data case DC-36.
+C For nearly identical case (except for use of dummy internal nodes, which
+C makes it more general), see DC-64 (associated with 2nd subcase of DC-36).
+C For the use of arguments without any $INCLUDE, see DC-65.
+$PREFIX, [] { $INCLUDE files are located in same place as this main data file
+$SUFFIX, .dat { File name of $INCLUDE will be followed by this file type
+ .005 4.0 { DELTAT and TMAX are in fact arbitrary, since no simulation
+ 1 -1 1 1 1
+TACS HYBRID
+99 FIRE1 = TIMEX
+99 FIRE2 = TIMEX
+99 FIRE3 = TIMEX
+13FAKE
+98 FIRE452+UNITY 1. 0. 0. TIMEX
+98 FIRE552+UNITY 1. 0. 0. TIMEX
+98 FIRE652+UNITY 1. 0. 0. TIMEX
+BLANK card ends all TACS data
+C The following two cards easily could be combined into a single one. But we
+C want to illustrate continuation cards. Note the "C" in column 1. Well,
+C there once was. Such a C still is permitted on a continuation card, but
+C it no longer is required, as the following illustrates:
+$INCLUDE, dc8incl1, ACNOD, #MINUS, ##PLUS, $$ { Branch & switch cards
+ #FIRE, ##MID { use continuation (request "$$") as an illustration
+BLANK card ending BRANCH cards { Key word "BRANCH" needed for sorting, note
+BLANK card ending SWITCH cards { Key word "SWITCH" needed for sorting, note
+$STOP { After switches read, modularization & sorting are confirmed, so halt
+EOF ---- Needed so "OVER1" or "SPYING" ("DATA") ends input here during reading
+========================================================================
+C The following is a view of DC8INCL1.DAT, which must be made
+C into a separate, supporting disk file if the companion test
+C case DC-36 has not already created it:
+========================================================================
+KARD 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14
+ 14 15 15 16 16 17 17 18 18 19 19 21 21 21 22 22 22 23 23 23 24 24 24 25 25
+ 25 26 26 26
+KARG 1 5 1 5 1 5 1 5 1 5 1 5 3 5 3 5 3 5 3 5 3 5 3 5 1
+ 2 1 2 1 2 1 3 1 3 1 3 2 4 5 2 4 5 2 4 5 1 4 5 1 4
+ 5 1 4 5
+KBEG 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3 9 3
+ 9 3 9 3 9 3 9 3 9 3 9 9 65 3 9 65 3 9 65 3 9 65 3 9 65
+ 3 9 65 3
+KEND 7 13 7 13 7 13 7 13 7 13 7 13 8 13 8 13 8 13 8 13 8 13 8 13 7
+ 14 7 14 7 14 7 14 7 14 7 14 14 69 7 14 69 7 14 69 7 13 69 7 13 69
+ 7 13 69 7
+KTEX 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
+ 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
+ 1 1 1 1
+/BRANCH
+C3 BEGIN WITH ANODE REACTORS AND PARALLEL RESISTORS (6 PAIRS):
+ ?????A?????1 3000.
+ ?????A?????1 1.0
+ ?????B?????3 3000.
+ ?????B?????3 1.0
+ ?????C?????5 3000.
+ ?????C?????5 1.0
+ ???????????4 3000.
+ ???????????4 1.0
+ ???????????6 3000.
+ ???????????6 1.0
+ ???????????2 3000.
+ ???????????2 1.0
+C3 NEXT COME THE SNUBBER CIRCUITS, ACROSS VALVES AND ANODE REACTORS:
+ ?????A?????? 1200. 0.1
+ ?????B?????? 1200. 0.1
+ ?????C?????? 1200. 0.1
+ ?????A?????? 1200. 0.1
+ ?????B?????? 1200. 0.1
+ ?????C?????? 1200. 0.1
+C3 NEXT COME THE VALVES:
+/SWITCH
+11?????1?????? ?????2
+11?????3?????? ?????4
+11?????5?????? ?????6
+11?????4?????A ?????5
+11?????6?????B ?????1
+11?????2?????C ?????3
+==========================================================================
+C End of DC8INCL1.DAT disk file; Begin documentation of final cards:
+==========================================================================
+C $INCLUDE, dc8incl1, ACNOD, #MINUS, ##PLUS, #FIRE, ##MID
+C ACNODA MID1 3000.
+C ACNODA MID1 1.0
+C ACNODB MID3 3000.
+C ACNODB MID3 1.0
+C ACNODC MID5 3000.
+C ACNODC MID5 1.0
+C PLUS MID4 3000.
+C PLUS MID4 1.0
+C PLUS MID6 3000.
+C PLUS MID6 1.0
+C PLUS MID2 3000.
+C PLUS MID2 1.0
+C ACNODA MINUS 1200. 0.1
+C ACNODB MINUS 1200. 0.1
+C ACNODC MINUS 1200. 0.1
+C ACNODA PLUS 1200. 0.1
+C ACNODB PLUS 1200. 0.1
+C ACNODC PLUS 1200. 0.1
+C BLANK card ending BRANCH cards
+C 11 MID1 MINUS FIRE2
+C 11 MID3 MINUS FIRE4
+C 11 MID5 MINUS FIRE6
+C 11 MID4ACNODA FIRE5
+C 11 MID6ACNODB FIRE1
+C 11 MID2ACNODC FIRE3
+C BLANK card ending SWITCH cards
+C $STOP
+====================================================================
+C End of documentation of data cards after $INCLUDE processing
+====================================================================
|