diff options
Diffstat (limited to 'benchmarks/dc60.dat')
| -rw-r--r-- | benchmarks/dc60.dat | 207 |
1 files changed, 207 insertions, 0 deletions
diff --git a/benchmarks/dc60.dat b/benchmarks/dc60.dat new file mode 100644 index 0000000..073580e --- /dev/null +++ b/benchmarks/dc60.dat @@ -0,0 +1,207 @@ +BEGIN NEW DATA CASE
+C BENCHMARK DC-60 (DC-63 of "M39." vintage)
+C Generate Semlyen frequency-dependent branch cards for DC-61 simulation.
+C This is for an overhead transmission line of 4 phases from South Africa.
+C There are 2 ground wires that are not eliminated, followed by two phase
+C wire bundles of 4 individual conductors each (automatic bundling option)
+C Solution changes beginning 15 Oct 1988 due to Mustafa Kizilcay changes
+C Solution changed on 23 Oct 1990 due to Mustafa Kizilcay's modifications
+C (preceding commented data has been copied to bottom for preservation).
+SEMLYEN SETUP
+$ERASE
+BRANCH BUSA-1BUSB-1BUSA-2BUSB-2BUSA-3BUSB-3BUSA-4BUSB-4
+C 345678901234567890123456
+C 50 100 2 31 0 1 ???? WSMWSM. SPY PLOT dies in TDFIT. See TODO
+ 50 100 2 1 0 1 { 27 Sept 1987 abandon SPY PLOT try
+C 150 150 2 1 0 1 { Modify preceding for Oct, 1990 (Mustafa)
+LINE CONSTANTS
+METRIC
+ 1 .2 .273 4 1.7653 0. 39. 20.
+ 2 .2 .273 4 1.7653 30. 39. 20.
+ 3 .392 .0585 4 3.1750 2.3 27.5 8.5 50.8 45. 4
+ 4 .392 .0585 4 3.1750 32.3 27.5 8.5 50.8 45. 4
+BLANK card ending all conductor cards of embedded "LINE CONSTANTS" data case
+ 100. 5000. { Transient frequency } 375.
+ 100. 50. { Power frequency } 375.
+ 100. 5. { Logarithmic looping } 375. 6 13
+BLANK card ending frequency cards of embedded "LINE CONSTANTS" data case
+BLANK card ending "LINE CONSTANTS" data cases
+$PUNCH, dc60a.pch ! { Create file of branch cards that is used by DC-61
+C -1BUSA-1BUSB-1 4.66135E-03 1.51343E-03 1 1 2 2 4
+C 1.24062832E+01 1.36478386E+02 2.69566232E-04 2.96542998E-03 5.00000000E+01
+C 0.00000E+00 2.78943E+03 8.96815E-01 0.00000E+00 2.82127E+02 1.03185E-01
+C 0.00000E+00 1.00000E+00 0.00000E+00 0.00000E+00 1.00000E+00 0.00000E+00
+C -1BUSA-2BUSB-2 7.53874E-03 1.28352E-03 2 2 2 2 4
+C 5.24979345E-01 5.57653032E+01 2.98359630E-05 3.16928949E-03 5.00000000E+01
+C 0.00000E+00 4.32886E+04 9.70952E-01 0.00000E+00 7.80994E+02 2.90477E-02
+C 0.00000E+00 1.00000E+00 0.00000E+00 0.00000E+00 1.00000E+00 0.00000E+00
+C -1BUSA-3BUSB-3 3.02741E-03 1.25731E-03 3 3 2 2 4
+C 1.32033703E-01 1.34020415E+02 1.21011536E-06 1.22832398E-03 5.00000000E+01
+C 0.00000E+00 1.55166E+05 8.17954E-01 0.00000E+00 6.28350E+03 1.82046E-01
+C 0.00000E+00 1.00000E+00 0.00000E+00 0.00000E+00 1.00000E+00 0.00000E+00
+C -1BUSA-4BUSB-4 2.78022E-03 1.25695E-03 4 4 2 2 4
+C 1.32366981E-01 1.45869410E+02 1.02314498E-06 1.12751348E-03 5.00000000E+01
+C 0.00000E+00 1.68593E+05 8.00343E-01 0.00000E+00 6.82607E+03 1.99657E-01
+C 0.00000E+00 1.00000E+00 0.00000E+00 0.00000E+00 1.00000E+00 0.00000E+00
+C 8.71196E-01 0.00000E+00-6.82907E-01 0.00000E+00 1.00000E+00 0.00000E+00
+C -4.17499E-01 0.00000E+00
+C 8.83886E-01 0.00000E+00 5.54912E-01 0.00000E+00 4.08289E-01 0.00000E+00
+C 1.00000E+00 0.00000E+00
+C 1.00000E+00 0.00000E+00-9.54437E-01 0.00000E+00-3.66121E-01 0.00000E+00
+C 8.12296E-02 0.00000E+00
+C 9.95383E-01 0.00000E+00 1.00000E+00 0.00000E+00-1.44179E-01 0.00000E+00
+C -2.87785E-01 0.00000E+00
+C 1.37541E-01 0.00000E+00-1.35060E-01 0.00000E+00 6.63012E-01 0.00000E+00
+C -3.22845E-01 0.00000E+00
+C 1.37175E-01 0.00000E+00 1.05171E-01 0.00000E+00 2.58426E-01 0.00000E+00
+C 7.23501E-01 0.00000E+00
+C 3.80344E-01 0.00000E+00-4.21913E-01 0.00000E+00-5.68095E-01 0.00000E+00
+C 1.36871E-01 0.00000E+00
+C 3.80607E-01 0.00000E+00 4.48514E-01 0.00000E+00-2.39474E-01 0.00000E+00
+C -4.94318E-01 0.00000E+00
+C The preceding [Tv] and [Ti] became dated 27 November 2000 when wide
+C format 3E26.18 replaced the preceding narrow 6E12.5 as follows:
+C NO IMAGINARY PART { Read big paragraph about this in April, 2001, newsletter
+C 8.7119547363418204E-01 -6.8290399916049649E-01 1.0000000000000000E+00
+C -4.1751471137169216E-01
+C 8.8388614757606232E-01 5.5490882086169024E-01 4.0830470329277252E-01
+C 1.0000000000000000E+00
+C 1.0000000000000000E+00 -9.5443745577162542E-01 -3.6612132519723661E-01
+C 8.1233987662551091E-02
+C 9.9538310340828784E-01 1.0000000000000000E+00 -1.4418465250059978E-01
+C -2.8778382559374205E-01
+C 1.3754116813200981E-01 -1.3505887318129409E-01 6.6300444003574899E-01
+C -3.2285375114835768E-01
+C 1.3717544529936490E-01 1.0517024919034780E-01 2.5843487930520492E-01
+C 7.2349433296321430E-01
+C 3.8034372781882003E-01 -4.2191352219870149E-01 -5.6808980138853893E-01
+C 1.3687783149931779E-01
+C 3.8060712761124860E-01 4.4851503525080577E-01 -2.3948114907845639E-01
+C -4.9431125919891056E-01
+BLANK card ending "SEMLYEN SETUP" data cases
+BEGIN NEW DATA CASE
+C 2nd of 3 SEMLYEN SETUP data cases illustrates use for cables. First,
+C use the old, original CABLE CONSTANTS. The cable is 3-phase, so a total
+C of 6 conductors. Added 27 January 2001
+SEMLYEN SETUP
+$ERASE
+BRANCH SEND1 REC1 SEND2 REC2 SEND3 REC3 SEND4 REC4 SEND5 REC5 SEND6 REC6
+TOLERANCES 10 5000. { Illustration only; value of FMED actually unchanged
+ 200 150 10 230 1 7 7777 0 { Semlyen miscellaneous data
+CABLE CONSTANTS
+ 2 -1 3 0 0 0 0 0 0 0 0 0
+ 2 2 2
+ 0.0 23.30E-3 49.80E-3 51.00E-3 56.00E-3
+ 1.724E-8 1.0 1.4 2.7 1.724E-8 1.0 1.0 2.5
+ 0.0 23.30E-3 49.80E-3 51.00E-3 56.00E-3
+ 1.724E-8 1.0 1.4 2.7 1.724E-8 1.0 1.0 2.5
+ 0.0 23.30E-3 49.80E-3 51.00E-3 56.00E-3
+ 1.724E-8 1.0 1.4 2.7 1.724E-8 1.0 1.0 2.5
+ 2.500 0.0 2.730 0.0 2.960 0.0
+ 100. 50.E02 90.1
+ 100. 60.000 90.1
+ 100. 10. 6 10 90.1
+BLANK card ending frequency cards of "CABLE CONSTANTS" data
+BLANK card ending CABLE CONSTANTS data cases
+C $PUNCH { Display the Semlyen branch cards that have been created
+C The preceding was bad because cards of this 2nd subcase ended up
+C in the disk file of the 1st, which then caused trouble (KILL
+C termination) during use of DC-61. Solve this problem by naming
+C the output of this 2nd subcase, even though it is not used by
+C subsequent data case
+$PUNCH, dc60b.pch ! { Create file of branch cards separate from 1st subcase
+BLANK card ending SEMLYEN SETUP data cases
+BEGIN NEW DATA CASE
+C 3rd of 3 SEMLYEN SETUP data cases illustrates use for cables. This is
+C identical to the preceding subcase except CABLE CONSTANTS has been
+C replaced by newer CABLE PARAMETERS. Added 27 January 2001
+SEMLYEN SETUP
+$ERASE
+BRANCH SEND1 REC1 SEND2 REC2 SEND3 REC3 SEND4 REC4 SEND5 REC5 SEND6 REC6
+TOLERANCES 10 5000. { Illustration only; value of FMED actually unchanged
+ 200 150 10 230 1 7 7777 0 { Semlyen miscellaneous data
+CABLE PARAMETERS { This 1 line is the only difference from preceding data case
+ 2 -1 3 0 0 0 0 0 0 0 0 0
+ 2 2 2
+ 0.0 23.30E-3 49.80E-3 51.00E-3 56.00E-3
+ 1.724E-8 1.0 1.4 2.7 1.724E-8 1.0 1.0 2.5
+ 0.0 23.30E-3 49.80E-3 51.00E-3 56.00E-3
+ 1.724E-8 1.0 1.4 2.7 1.724E-8 1.0 1.0 2.5
+ 0.0 23.30E-3 49.80E-3 51.00E-3 56.00E-3
+ 1.724E-8 1.0 1.4 2.7 1.724E-8 1.0 1.0 2.5
+ 2.500 0.0 2.730 0.0 2.960 0.0
+ 100. 50.E02 90.1
+ 100. 60.000 90.1
+ 100. 10. 6 10 90.1
+BLANK card ending frequency cards of CABLE PARAMETERS data
+BLANK card ending "CABLE PARAMETERS" data cases
+$PUNCH { Display the Semlyen branch cards that have been created
+BLANK card ending SEMLYEN SETUP data cases
+BEGIN NEW DATA CASE
+BLANK
+EOF
+
+
+BEGIN NEW DATA CASE
+C BENCHMARK DC-60 (DC-63 of "M39." vintage)
+C Generate Semlyen frequency-dependent branch cards for DC-61 simulation.
+C This is for an overhead transmission line of 4 phases from South Africa.
+C There are 2 ground wires that are not eliminated, followed by two phase
+C wire bundles of 4 individual conductors each (automatic bundling option)
+C Solution changes beginning 15 Oct 1988 due to Mustafa Kizilcay changes
+C This is file prior to 23 Oct 1990 when Mustafa changed answers again.
+SEMLYEN SETUP
+$ERASE
+BRANCH BUSA-1BUSB-1BUSA-2BUSB-2BUSA-3BUSB-3BUSA-4BUSB-4
+C 345678901234567890123456
+C 50 100 2 31 0 1 ???? WSMWSM. SPY PLOT dies in TDFIT. See TODO
+ 50 100 2 1 0 1 { 27 Sept 1987 abandon SPY PLOT try
+C 150 150 2 1 0 1 { Modify preceding for Oct, 1990 (Mustafa)
+LINE CONSTANTS
+METRIC
+ 1 .2 .273 4 1.7653 0. 39. 20.
+ 2 .2 .273 4 1.7653 30. 39. 20.
+ 3 .392 .0585 4 3.1750 2.3 27.5 8.5 50.8 45. 4
+ 4 .392 .0585 4 3.1750 32.3 27.5 8.5 50.8 45. 4
+BLANK card ending all conductor cards of embedded "LINE CONSTANTS" data case
+ 100. 5000. { Transient frequency } 375.
+ 100. 50. { Power frequency } 375.
+ 100. 5. { Logarithmic looping } 375. 6 13
+BLANK card ending frequency cards of embedded "LINE CONSTANTS" data case
+BLANK card ending "LINE CONSTANTS" data cases
+$PUNCH
+C -1BUSA-1BUSB-1 4.66135E-03 1.51343E-03 1 1 2 2 4
+C 2.48913100E+01 1.34761598E+02 0.00000000E+00 2.97765695E-03 5.00000000E+01
+C 0.00000E+00 2.78943E+03 8.96815E-01 0.00000E+00 2.82127E+02 1.03185E-01
+C 0.00000E+00 1.00000E+00 0.00000E+00 0.00000E+00 1.00000E+00 0.00000E+00
+C -1BUSA-2BUSB-2 7.53874E-03 1.28352E-03 2 2 2 2 4
+C 5.22828256E+00 5.55221551E+01 0.00000000E+00 3.16942993E-03 5.00000000E+01
+C 0.00000E+00 4.32886E+04 9.70952E-01 0.00000E+00 7.80994E+02 2.90477E-02
+C 0.00000E+00 1.00000E+00 0.00000E+00 0.00000E+00 1.00000E+00 0.00000E+00
+C -1BUSA-3BUSB-3 3.02741E-03 1.25731E-03 3 3 2 2 4
+C 5.31735791E+01 1.23020566E+02 0.00000000E+00 1.22832457E-03 5.00000000E+01
+C 0.00000E+00 1.55166E+05 8.17954E-01 0.00000E+00 6.28350E+03 1.82046E-01
+C 0.00000E+00 1.00000E+00 0.00000E+00 0.00000E+00 1.00000E+00 0.00000E+00
+C -1BUSA-4BUSB-4 2.78022E-03 1.25695E-03 4 4 2 2 4
+C 6.42684771E+01 1.30948331E+02 0.00000000E+00 1.12751395E-03 5.00000000E+01
+C 0.00000E+00 1.68593E+05 8.00343E-01 0.00000E+00 6.82607E+03 1.99657E-01
+C 0.00000E+00 1.00000E+00 0.00000E+00 0.00000E+00 1.00000E+00 0.00000E+00
+C 8.71196E-01 0.00000E+00-6.82907E-01 0.00000E+00 1.00000E+00 0.00000E+00
+C -4.17499E-01 0.00000E+00
+C 8.83886E-01 0.00000E+00 5.54912E-01 0.00000E+00 4.08289E-01 0.00000E+00
+C 1.00000E+00 0.00000E+00
+C 1.00000E+00 0.00000E+00-9.54437E-01 0.00000E+00-3.66121E-01 0.00000E+00
+C 8.12296E-02 0.00000E+00
+C 9.95383E-01 0.00000E+00 1.00000E+00 0.00000E+00-1.44179E-01 0.00000E+00
+C -2.87785E-01 0.00000E+00
+C 1.37541E-01 0.00000E+00-1.35060E-01 0.00000E+00 6.63012E-01 0.00000E+00
+C -3.22845E-01 0.00000E+00
+C 1.37175E-01 0.00000E+00 1.05171E-01 0.00000E+00 2.58426E-01 0.00000E+00
+C 7.23501E-01 0.00000E+00
+C 3.80344E-01 0.00000E+00-4.21913E-01 0.00000E+00-5.68095E-01 0.00000E+00
+C 1.36871E-01 0.00000E+00
+C 3.80607E-01 0.00000E+00 4.48514E-01 0.00000E+00-2.39474E-01 0.00000E+00
+C -4.94318E-01 0.00000E+00
+BLANK card ending "SEMLYEN SETUP" data cases
+BEGIN NEW DATA CASE
+BLANK
|