diff options
Diffstat (limited to 'benchmarks/dc54.dat')
| -rw-r--r-- | benchmarks/dc54.dat | 54 |
1 files changed, 54 insertions, 0 deletions
diff --git a/benchmarks/dc54.dat b/benchmarks/dc54.dat new file mode 100644 index 0000000..65d16ef --- /dev/null +++ b/benchmarks/dc54.dat @@ -0,0 +1,54 @@ +BEGIN NEW DATA CASE
+C BENCHMARK DC-54
+C Delayed plotting of DC-3 plot file via "REPLOT" usage. Format of the
+C connection ($OPEN,) may depend on computer due to different file names.
+C There are 3 subcases, with the first providing a character plot and the
+C remaining 2 providing vector plots (maybe not supported on all machines).
+DISK PLOT DATA { Toggle Apollo default of LUNIT4 = -4 to +4 for disk storage
+CUSTOM PLOT FILE { Request for REAL*8 .PL4 file (see July, 1995, newsletter)
+$CLOSE, UNIT=LUNIT4 STATUS=DELETE { Disconnect now-empty file connected by SYSDEP
+$OPEN, UNIT=LUNIT4 FILE=dc3.pl4 STATUS=OLD ! Connect C-like plot file from DC-3
+REPLOT { Request for connection to batch-mode plotting of EMTP
+ PRINTER PLOT { Switch from vector (the default mode) plotting to character
+ 144 1. 0.0 20. 18-A 18-B 18-C { Axis limits: (-1.276, 0.880)
+$CLOSE, UNIT=LUNIT4 STATUS=KEEP { Disconnect data file protects against damage
+BLANK card ending plot cards
+BEGIN NEW DATA CASE
+C 2nd of 3 subcases. This sends two vector plots only to the screen.
+C DISK PLOT DATA { Toggle Apollo default of LUNIT4 = -4 to +4 for disk storage
+C CUSTOM PLOT FILE { Request for REAL*8 .PL4 file (see July, 1995, newsletter)
+$CLOSE, UNIT=LUNIT4 STATUS=DELETE { Disconnect now-empty file connected by SYSDEP
+$OPEN, UNIT=LUNIT4 FILE=dc3.pl4 STATUS=OLD ! Connect C-like plot file from DC-3
+REPLOT { Request for connection to batch-mode plotting of EMTP
+C Following CalComp declaration is required only because of preceding subcase:
+ CALCOMP PLOT { Switch from former "PRINTER PLOT" mode to this CalComp mode
+ SCREEN PLOT { Send "CALCOMP PLOT" output to the screen rather than plotter
+ 2Arbitrary 78-character case title text of which this is an example, I hope.
+ First of two lines of 78-byte graph subheading text.
+ Second and final such line of graph subheading text.
+ 144 1. 0.0 10. 18-A 18-B 18-C Graph heading---Vertical axis la
+C Note that no titles are redefined for the following plot. Hence there will
+C be no multi-line sub-title, although the single-line title at top repeats.
+ 144 1. 0.0 10. 18-B
+$CLOSE, UNIT=LUNIT4 STATUS=KEEP { Disconnect data file protects against damage
+BLANK card ending plot cards
+BEGIN NEW DATA CASE
+C 3rd of 3 subcases. This sends two vector plots only to the plotter.
+C DISK PLOT DATA { Toggle Apollo default of LUNIT4 = -4 to +4 for disk storage
+C CUSTOM PLOT FILE { Request for REAL*8 .PL4 file (see July, 1995, newsletter)
+$CLOSE, UNIT=LUNIT4 STATUS=DELETE { Disconnect now-empty file connected by SYSDEP
+$OPEN, UNIT=LUNIT4 FILE=dc3.pl4 STATUS=OLD ! Connect C-like plot file from DC-3
+REPLOT { Request for connection to batch-mode plotting of EMTP
+C Following "PEN PLOT" declaration is disabled for Apollo only because the
+C average owner has no real CalComp (which was coded for Bernd Stein of FGH).
+C For GEOGRAF of MS-DOS version, this card should be enabled (it is needed):
+ PEN PLOT { Send "CALCOMP PLOT" output to the plotter rather than the screen
+ 2Arbitrary 78-character case title text of which this is an example, I hope.
+ First of two lines of 78-byte graph subheading text.
+ Second and final such line of graph subheading text.
+ 144 1. 0.0 10. 18-A 18-B 18-C Graph heading---Vertical axis la
+ 144 1. 0.0 10. 18-A { Note this 2nd pen plot will have no labels
+$CLOSE, UNIT=LUNIT4 STATUS=KEEP { Disconnect data file protects against damage
+BLANK card ending plot cards
+BEGIN NEW DATA CASE
+BLANK
|