diff options
Diffstat (limited to 'benchmarks/dc40.dat')
| -rw-r--r-- | benchmarks/dc40.dat | 417 |
1 files changed, 417 insertions, 0 deletions
diff --git a/benchmarks/dc40.dat b/benchmarks/dc40.dat new file mode 100644 index 0000000..dea4726 --- /dev/null +++ b/benchmarks/dc40.dat @@ -0,0 +1,417 @@ +BEGIN NEW DATA CASE
+C BENCHMARK DC-40
+C This present data case restarts the "STATISTICS" (Monte Carlo) simulation
+C of DC-24, which ran only 3 energizations. When this 2nd half finishes,
+C 6 will have been completed, to be compared with "M39." answers of DC-24.
+C Yet answers differ due to different random number generator and use of the
+C seed (now, initialization only occurs once). As for the disk file that is
+C connected to UNIT=2 immediately below, note that it is disconnected 3
+C lines later, and DUM.BIN is reconnected. This is to protect DC24.BIN
+C from a stray write. But beware! The replacement file DUM.BIN must be a
+C perfect copy of the original DC24TO40.BIN to ensure correct answers, since
+C it is DUM.BIN from which restoration will actually occur for the second
+C and later simulations of this restarted case. Finally, be careful of OPMC
+C Beware of PARALLEL.LIS entry for same USERID that might modify NENERG!
+$OPEN, UNIT=LUNIT2 FILE=dc24.bin STATUS=OLD FORM=UNFORMATTED ! { Hold case
+START AGAIN { Request for awakening of hibernating solution
+ 9999 { Terminate modifications (none, here) to switching times
+C Cancel special output for MS Excel of DC-24 tables. Addition on 21 July 2007:
+C Type --- Ruler for file type of Excel output file:
+EXTREMA OUTPUT FOR EXCEL .off { Columns 29-32 carry optional file type
+$OPEN, UNIT=LUNIT2 FILE=dc24at40.ext STATUS=OLD FORM=UNFORMATTED RECL=16000 !
+LOAD MORE SHOTS { Load the separate extrema produced by 3 shots made in DC-24
+MISCELLANEOUS DATA CARDS
+ 100.E-6 20.E-3 60.
+ 1 1 1 1 1 0 0 6
+C ISW ITEST IDIST IMAX IDICE KSTOUT KNTRPT NSEED
+ 1 1 0 0 1 { KSTOUT is blank, not 0! } 1
+C GENA GENC ENDA B1 ASW10
+C Reference angle A1 C1 A10 BSW1
+C
+C GENB ENDA
+C B1 A10
+C The following is DIAGNOSTIC from "RANDNZ" usage of overlay 12. Not a
+C normal case output, this is useful in case switching times are incorrect:
+C "RFUNL1/RANDNZ". KNT = 4. SY, D6, SEEDRN, D18 (result) follow ....
+C 0.439822971502571000E+02 0.446592684878350000E+14
+C 0.198544027000000000E+09 0.046227133600041
+C "RFUNL1/RANDNZ". KNT = 4. SY, D6, SEEDRN, D18 (result) follow ....
+C 0.000000000000000000E+00 0.137132374008640000E+14
+C 0.370179203200000000E+10 0.861890621483326
+C "RFUNL1/RANDNZ". KNT = 4. SY, D6, SEEDRN, D18 (result) follow ....
+C 0.000000000000000000E+00 0.255679073858209000E+15
+C 0.396569462500000000E+10 0.923335232073441
+C "RFUNL1/RANDNZ". KNT = 4. SY, D6, SEEDRN, D18 (result) follow ....
+C 0.000000000000000000E+00 0.273906562054126000E+15
+C 0.361268631800000000E+10 0.841144080739468
+C "RFUNL1/RANDNZ". KNT = 4. SY, D6, SEEDRN, D18 (result) follow ....
+C 0.000000000000000000E+00 0.249524631297943000E+15
+C 0.421126952700000000E+10 0.980512594571337
+C Random switching times for energization number 4 :
+C 1 2.1466476E-03 2 4.4995694E-03 3 8.0648931E-03
+C 0.0 125.9695623 -58.920794 52.58141134 370.8688937 -424.516718
+C 1.249136867 -1.87200012
+C Times of maxima : .0023 .0114 .0094 .0049 .0078
+C .0049 .0171
+TIME STEP LOOP { Transfer control to overlay 16 for a resumption of simulation
+C "RFUNL1/RANDNZ". KNT = 5. SY, D6, SEEDRN, D18 (result) follow ....
+C 0.439822971502571000E+02 0.290868174960364000E+15
+C 0.104773356000000000E+09 0.024394447915256
+C "RFUNL1/RANDNZ". KNT = 5. SY, D6, SEEDRN, D18 (result) follow ....
+C 0.000000000000000000E+00 0.723659092556500000E+13
+C 0.386599910100000000E+10 0.900123059051111
+C "RFUNL1/RANDNZ". KNT = 5. SY, D6, SEEDRN, D18 (result) follow ....
+C 0.000000000000000000E+00 0.267020691906970000E+15
+C 0.257511465000000000E+10 0.599565601442009
+C "RFUNL1/RANDNZ". KNT = 5. SY, D6, SEEDRN, D18 (result) follow ....
+C 0.000000000000000000E+00 0.177860593760851000E+15
+C 0.170306619500000000E+10 0.396525998366997
+C "RFUNL1/RANDNZ". KNT = 5. SY, D6, SEEDRN, D18 (result) follow ....
+C 0.000000000000000000E+00 0.117629079022456000E+15
+C 0.280968690400000000E+10 0.654181210324168
+C Random switching times for energization number 5 :
+C 1 2.0344905E-03 2 3.8690347E-03 3 6.3961916E-03
+C 0.0 131.4745297 -76.1213478 -90.4743742 472.0143285 -556.117151
+C 1.594127662 -1.83850686
+C Times of maxima : .0022 .0127 .0083 .0139 .0074
+C .0044 .0172
+C "RFUNL1/RANDNZ". KNT = 6. SY, D6, SEEDRN, D18 (result) follow ....
+C 0.439822971502571000E+02 0.194062264772377000E+15
+C 0.275743720900000000E+10 0.642015880206600
+C "RFUNL1/RANDNZ". KNT = 6. SY, D6, SEEDRN, D18 (result) follow ....
+C 0.000000000000000000E+00 0.190453430588422000E+15
+C 0.169578189400000000E+10 0.394829989876598
+C "RFUNL1/RANDNZ". KNT = 6. SY, D6, SEEDRN, D18 (result) follow ....
+C 0.000000000000000000E+00 0.117125959636687000E+15
+C 0.220147476700000000E+10 0.512570786988363
+C "RFUNL1/RANDNZ". KNT = 6. SY, D6, SEEDRN, D18 (result) follow ....
+C 0.000000000000000000E+00 0.152053660681924000E+15
+C 0.322846893200000000E+10 0.751686499454081
+C "RFUNL1/RANDNZ". KNT = 6. SY, D6, SEEDRN, D18 (result) follow ....
+C 0.000000000000000000E+00 0.222987120664309000E+15
+C 0.100859058100000000E+10 0.234830794157460
+C Random switching times for energization number 6 :
+C 1 2.0043546E-03 2 4.3397550E-03 3 5.2772330E-03
+C 0.0 131.4745297 -102.270651 45.1085527 370.2365789 -461.601966
+C 1.25947653 -1.88310377
+C Times of maxima : .0022 .0054 .0094 .0052 .0076
+C .02 .017
+C 1 ) --------------------------------------------------------------------------
+C Statistical distribution of peak voltage for branch "GENA " to "A1 ".
+C Interval voltage voltage in Frequency Cumulative
+C number in per unit physical units (density) frequency
+C 25 1.2500000 0.12500000E+03 0 0
+C 26 1.3000000 0.13000000E+03 1 1
+C 27 1.3500000 0.13500000E+03 2 3
+C 28 1.4000000 0.14000000E+03 1 4
+C 29 1.4500000 0.14500000E+03 2 6
+C Summary for following request: Mean = 1.35833333E+00 1.34924018E+00
+C Variance = 3.66666667E-03 4.10518277E-03
+C Standard deviation = 6.05530071E-02 6.40717002E-02
+-1 100. GENA A1
+-1 GENC C1 ENDA A10 { =2.53418455E-1, Variance = 3.02359400E-3
+ ASW10 BSW10 CSW10 { Mean=1.49453887E+0, Variance = 6.41172862E-2
+C MODTAB AINCR XMAXMX
+STATISTICS DATA 1 -10. 0.0 ---- Fixed number of 10 boxes
+-3 B1 BSW1 { Ungroup: Mean=1.07790313E+0, Variance = 1.44614228E-2
+STATISTICS DATA 1 .05 0.0 --- Return to p.u. box of 1/20
+-2 0. GENB B1 ENDA A10 { =1.11785582E+0, Variance = 1.92038029E-2
+STATISTICS DATA 1 -5.0 0.0 ---- Fixed number of 5 boxes
+-4 0. B1 BSW1 { Ungroup: Mean=1.27016791E+0, Variance = 8.50686724E-2
+C 12 ) -------------------------------------------------------------------------
+C Statistical distribution of peak energy for branch "B1 " to "BSW1 ".
+C Interval energy energy in Frequency Cumulative
+C number in per unit physical units (density) frequency
+C 5 0.9692791 0.66169358E+00 0 0
+C 6 1.1631349 0.79403229E+00 2 2
+C 7 1.3569907 0.92637101E+00 2 4
+C 8 1.5508465 0.10587097E+01 1 5
+C 9 1.7447023 0.11910484E+01 0 5
+C 10 1.9385582 0.13233872E+01 1 6
+C Distribution parameters for .. data follow. Grouped data Ungrouped data
+C Mean = 1.32468140E+00 1.27016791E+00
+C Variance = 8.51815081E-02 8.50686724E-02
+C Standard deviation = 2.91858713E-01 2.91665343E-01
+C Switch "A1 " to "ASW1 "
+C 8.33333377E-03 switch closings per column
+C Columns
+C 5 10 15 20 25 30
+C +----+----+----+----+----+----+ (Note: all "A" below did line
+C A * up before left shift,
+C A * in about column 127).
+C A *
+C A *
+C | * Pull in to col 80 ----> A
+C | * Pull in to col 80 ----> A
+C A *
+C | * Pull in to col 80 ----> A
+C A *
+C A *
+C A *
+C A *
+C | 2.0000E-03 * Pull in to col 80 ----> A
+C A *
+C | * Pull in to col 80 ----> A
+C A *
+C A *
+C A *
+C A *
+C A *
+C A *
+C A *
+C | * Pull in to col 80 ----> A
+C A *
+C A *
+C Time (scale = 1.44337567E-05 Sec/line)
+BLANK card ending statistical output variable requests
+BEGIN NEW DATA CASE
+C ======================================================================
+C 2nd of 4 subcases will follow an explanation of how to produce vector
+C plots of statistical distributions in Apollo window using input of the
+C preceding solution. See "STATPLOT" as described in Section I-F-1-g
+C of the rule book. Execute the following in a 2/3-height window with
+C font F7x13.B and nearly full width:
+C $ STATPLOT.EXE
+C Y 5 .9 1.9
+C HELP
+C GO
+C <<< Pasted data beginning with 1st row of the
+C <<< statistical tabulation of peak energy for
+C <<< branch "B1 " to "BSW1 ". This begins
+C <<< in row 10 and extends through row 20, followed
+C <<< 4 lines of summary statistics. See Rule Book.
+C LINE 1.4 0.1
+C LINE 1.8 0.1
+C LINE 1.0 1.0
+C ======================================================================
+C On to the 2nd subcase, which will illustrate statistical tabulation
+C of previously-generated energizations without the addition of any new
+C solutions. It also illustrates the combination of 2 sets of extrema,
+C with the 1st coming from the 1st subcase of DC-24 (just as with the
+C preceding data subcase) and the 2nd coming from the 3rd subcase of
+C DC-24. This illustrates the use of "LOAD NEXT PART" that announces
+C or requests concatenation of the 2nd set of extrema. Finally, there
+C is illustration of the erasure of energizations from each set. Since
+C both sets of data are really identical, killing one extrema in 1 file
+C and the remaining 2 in the other, in any combination, will result in
+C 3 remaining extrema that should tabulate identically to the 3 of DC-24
+$OPEN, UNIT=LUNIT2 FILE=dc24.bin STATUS=OLD FORM=UNFORMATTED ! { Hold case
+START AGAIN { Load hibernating solution (except for separate extrema)
+ 9999 { Terminate modifications (none, here) to switching times
+C Cancel special output for MS Excel of DC-24 tables. Addition on 21 July 2007:
+C Type --- Ruler for file type of Excel output file:
+EXTREMA OUTPUT FOR EXCEL .off { Columns 29-32 carry optional file type
+$OPEN, UNIT=LUNIT2 FILE=dc24at40.ext STATUS=OLD FORM=UNFORMATTED RECL=16000 !
+C 345678901234567890 KIL KIL KIL KIL --- Ruler for (20X, 15I4) of next card:
+LOAD MORE SHOTS 2 { Load extrema of DC-24 minus shot number 2
+TOGGLE EXTREMA MODE { Change from default UNFORMATTED mode to card images
+$OPEN, UNIT=LUNIT2 FILE=dc24ct40.lis STATUS=OLD FORM=FORMATTED !
+LOAD MORE SHOTS 1 3 { Load additional history, minus shots 1 & 3
+C Following card means next case will have L2FORM = 0 within "REQUES"
+C whether code is overlaid or not. Otherwise, virtual computers would
+C have kept L2FORM = 1 whereas overlaid would have reset L2FORM = 0.
+TOGGLE EXTREMA MODE { Restore the default UNFORMATTED mode of "LOAD MORE SHOTS"
+MISCELLANEOUS DATA CARDS
+ 100.E-6 20.E-3 60.
+ 1 1 1 1 1 0 0 3
+C ISW ITEST IDIST IMAX IDICE KSTOUT KNTRPT NSEED
+ 1 1 0 0 1 { KSTOUT is blank, not 0! } 1
+TIME STEP LOOP { Transfer control to overlay 16 for a resumption of simulation
+C 1 ) --------------------------------------------------------------------------
+C Statistical distribution of peak voltage for branch "GENA " to "A1 ".
+C Interval voltage voltage in Frequency Cumulative
+C number in per unit physical units (density) frequency
+C 27 1.3500000 0.13500000E+03 0 0
+C 28 1.4000000 0.14000000E+03 1 1
+C 29 1.4500000 0.14500000E+03 2 3
+C Distribution parameters for .. data follow. Grouped data Ungrouped data
+C Mean = 1.40833333E+00 1.40208495E+00
+C Variance = 8.33333333E-04 8.75092111E-04
+C Standard deviation = 2.88675135E-02 2.95819558E-02
+-1 100. GENA A1
+C &&&&&&&&&&&&& End request and documentation. Begin 3 coupled cards ......
+C 2 ) --------------------------------------------------------------------------
+C Statistical distribution of peak voltage for branch "GENA " to "A1 ".
+C Interval voltage voltage in Frequency Cumulative
+C number in per unit physical units (density) frequency
+C 9 0.4500000 0.13635000E+03 0 0
+C 10 0.5000000 0.15150000E+03 3 3
+C Distribution parameters for .. data follow. Grouped data Ungrouped data
+C Mean = 4.75000000E-01 4.62734306E-01
+C Variance = 0.00000000E+00 9.53165933E-05
+C Standard deviation = 0.00000000E+00 9.76302173E-03
+-1 GENA A1 CONT.
+C 3 ) --------------------------------------------------------------------------
+C Statistical distribution of peak voltage for branch "GENC " to "C1 ".
+C Interval voltage voltage in Frequency Cumulative
+C number in per unit physical units (density) frequency
+C 4 0.2000000 0.60600000E+02 0 0
+C 5 0.2500000 0.75750000E+02 2 2
+C 6 0.3000000 0.90900000E+02 1 3
+C Distribution parameters for .. data follow. Grouped data Ungrouped data
+C Mean = 2.41666667E-01 2.45766731E-01
+C Variance = 8.33333333E-04 2.19347831E-03
+C Standard deviation = 2.88675135E-02 4.68345845E-02
+-1 GENC C1 CONT.
+C 4 ) --------------------------------------------------------------------------
+C Statistical distribution of peak voltage for branch "ENDA " to "A10 ".
+C Interval voltage voltage in Frequency Cumulative
+C number in per unit physical units (density) frequency
+C 2 0.1000000 0.30300000E+02 0 0
+C 3 0.1500000 0.45450000E+02 2 2
+C 4 0.2000000 0.60600000E+02 1 3
+C Distribution parameters for .. data follow. Grouped data Ungrouped data
+C Mean = 1.41666667E-01 1.43690600E-01
+C Variance = 8.33333333E-04 9.61072666E-04
+C Standard deviation = 2.88675135E-02 3.10011720E-02
+-1 ENDA A10
+C 5 ) --------------------------------------------------------------------------
+C SUMMARY SUMMARY SUMMARY SUMMARY SUMMARY SUMMARY SUMMARY SUMMAR
+C 5 ) --------------------------------------------------------------------------
+C A distribution of peak values among all output branches of the last data card
+C statistical distribution is for the maximum of the peaks at all of these outpu
+C Interval voltage voltage in Frequency Cumulative
+C number in per unit physical units (density) frequency
+C 9 0.4500000 0.13635000E+03 0 0
+C 10 0.5000000 0.15150000E+03 3 3
+C Distribution parameters for .. data follow. Grouped data Ungrouped data
+C Mean = 4.75000000E-01 4.62734306E-01
+C Variance = 0.00000000E+00 9.53165933E-05
+C Standard deviation = 0.00000000E+00 9.76302173E-03
+C 3456789012345678901234567890123456789012345678
+C MODTAB AINCR XMAXMX
+STATISTICS DATA 1 0.0 0.0 ---- Only individual
+-1 GENC C1 { =.245766731, Variance=2.19347831E-3}
+C ----------- Following is 2nd mini-switch plot, which is the 1st Gaussian :
+C Switch "B1 " to "BSW1 "
+C 1.32420007E-02 switch closings per column
+C Columns
+C 5 10 15 20 25 30
+C +----+----+----+----+----+----+
+C X
+C X
+C X
+C X
+C A*
+C A *
+C A *
+C A *
+C A *
+C A *
+C A *
+C A *
+C | 4.0000E-03 * Pulled 3 columns left ---> A
+C | * Pulled 3 columns left ---> A
+C A *
+C A *
+C A *
+C | * Pulled 3 columns left ---> A
+C A *
+BLANK card ending statistical tabulation requests
+BEGIN NEW DATA CASE
+C 3rd of 4 total subcases, which will illustrate statistical tabulation
+C of previously-generated energizations without the addition of any new
+C solutions. It is like 2nd, only with a different erasure of 3 shots.
+C Tabulations are the same. Finally, it illustrates the omission of the
+C miniature character plots of switch closing times via NO SWITCH PLOTS.
+$OPEN, UNIT=LUNIT2 FILE=dc24.bin STATUS=OLD FORM=UNFORMATTED ! { Hold case
+START AGAIN { Load hibernating solution (except for separate extrema)
+ 9999 { Terminate modifications (none, here) to switching times
+C Cancel special output for MS Excel of DC-24 tables. Addition on 21 July 2007:
+C Type --- Ruler for file type of Excel output file:
+EXTREMA OUTPUT FOR EXCEL .off { Columns 29-32 carry optional file type
+$OPEN, UNIT=LUNIT2 FILE=dc24at40.ext STATUS=OLD FORM=UNFORMATTED RECL=16000 !
+C 345678901234567890 KIL KIL KIL KIL --- Ruler for (20X, 15I4) of next card:
+LOAD MORE SHOTS 3 { Load extrema of DC-24 minus shot number 3
+TOGGLE EXTREMA MODE { Change from default UNFORMATTED mode to card images
+$OPEN, UNIT=LUNIT2 FILE=dc24ct40.lis STATUS=OLD FORM=FORMATTED !
+LOAD MORE SHOTS 1 2 { Load additional history, minus shots 1 & 2
+C Following card means next case will have L2FORM = 0 within "REQUES"
+C whether code is overlaid or not. Otherwise, virtual computers would
+C have kept L2FORM = 1 whereas overlaid would have reset L2FORM = 0.
+TOGGLE EXTREMA MODE { Restore the default UNFORMATTED mode of "LOAD MORE SHOTS"
+MISCELLANEOUS DATA CARDS
+ 100.E-6 20.E-3 60.
+ 1 1 1 1 1 0 0 3
+C ISW ITEST IDIST IMAX IDICE KSTOUT KNTRPT NSEED
+ 1 1 0 0 1 { KSTOUT is blank, not 0! } 1
+TIME STEP LOOP { Transfer control to overlay 16 for a resumption of simulation
+C 1 ) --------------------------------------------------------------------------
+C Statistical distribution of peak voltage for branch "GENA " to "A1 ".
+C Interval voltage voltage in Frequency Cumulative
+C number in per unit physical units (density) frequency
+C 27 1.3500000 0.13500000E+03 0 0
+C 28 1.4000000 0.14000000E+03 1 1
+C 29 1.4500000 0.14500000E+03 2 3
+C Distribution parameters for .. data follow. Grouped data Ungrouped data
+C Mean = 1.40833333E+00 1.40208495E+00
+C Variance = 8.33333333E-04 8.75092111E-04
+C Standard deviation = 2.88675135E-02 2.95819558E-02
+-1 100. GENA A1
+C Column positioning of "NO SWITCH PLOTS" on blank terminator is arbitrary:
+BLANK card ending statistical tabulation requests --- NO SWITCH PLOTS ---
+BEGIN NEW DATA CASE
+C 4th of 4 total subcases will illustrate the repeated simulation of the
+C already-solved 2nd energization. By definition, only a single shot
+C will occur, and by means of KSTOUT = 0 we can look at time-step loop
+C output just as though there were no "STATISTICS". Such output now
+C can be followed by plotting (activated on 30 March 1989). Note that
+C the plot file header was created by the 2nd subcase of DC-24. It is
+C necessary to connect this since only time-step-loop output is produced
+C by "START AGAIN" usage such as here. Miscellaneous data parameter
+C ICAT = 2 will save the ".PL4" plot file, so subsequent, independent
+C plotting is possible (and is illustrated by the 2nd plot of the first
+C subcase of DC-54). There is no statistical tabulation for the present
+C subcase, of course. Variable KNTRPT = 2 repeats the 2nd shot of the
+C previously-solved 1st subcase of DC-24. The zero (not blank!) KSTOUT
+C provides desired time-step loop output.
+$OPEN, UNIT=LUNIT2 FILE=dc24.bin STATUS=OLD FORM=UNFORMATTED ! { Hold case
+START AGAIN { Request for awakening of hibernating solution
+ 9999 { Terminate modifications (none, here) to switching times
+C Cancel special output for MS Excel of DC-24 tables. Addition on 21 July 2007:
+C Type --- Ruler for file type of Excel output file:
+EXTREMA OUTPUT FOR EXCEL .off { Columns 29-32 carry optional file type
+$OPEN, UNIT=LUNIT2 FILE=dc24at40.ext STATUS=OLD FORM=UNFORMATTED RECL=16000 !
+C 345678901234567890 KIL KIL KIL KIL --- Ruler for (20X, 15I4) of next card:
+LOAD MORE SHOTS { Load extrema produced by 1st subcase of DC-24
+MISCELLANEOUS DATA CARDS
+ 100.E-6 20.E-3 60.
+ 1 1 1 1 1 0 2 3
+C Preceding KNTRPT = 3 was changed from former 6 on 23 Sept 1998.
+C ISW ITEST IDIST IMAX IDICE KSTOUT KNTRPT NSEED
+ 1 1 0 0 1 0 2 1
+CHANGE PRINTOUT FREQUENCY
+ 1 1 20 10
+$CLOSE, UNIT=LUNIT4 STATUS=DELETE { Destroy empty date/time plot file of "SYSDEP"
+$OPEN, UNIT=LUNIT4 FILE=dc24b40d.pl4 STATUS=OVERLAY ! { C-like uses only header
+C READ PL4 HEADER { Messes up C-like usage of PL4
+C Transfer control to the time-step loop. |TIME STEP LOOP { Transfer
+C GENA GENC ENDA B1 ASW10
+C Reference angle A1 C1 A10 BSW1
+C
+C GENB ENDA
+C B1 A10
+C Random switching times for energization number 2 :
+C 1 1.8999095E-03 2 4.7979502E-03 3 7.5258324E-03
+C 18 .0018 .284217E-13 -.26148E-11 .284217E-12 0.0 0.0
+C .192639E-17 .966554E-16
+C *** Close switch "A1 " to "ASW1 " after 1.90000000E-03 sec.
+C 19 .0019 -.28422E-13 .26148E-11 -.28422E-12 0.0 0.0
+C .210598E-16 .966554E-16
+TIME STEP LOOP { Transfer control to overlay 16 for a resumption of simulation
+C 200 .02 18.40117142 -5.2655535 13.97952075 79.19748583 128.2703628
+C .4457755752 -1.28521406
+C Variable max : 141.9164096 61.55446116 25.22399908 371.6253603 334.5616569
+C 1.207725131 .5125980517
+C Times of max : .002 .0154 .0132 .0059 .0028
+C .0058 .0105
+C Variable min : -103.914014 -46.8051457 -41.9189588 -288.448852 -318.274018
+C -1.09393135 -1.83695142
+C Times of min : .0032 .0144 .0139 .0071 .0088
+C .0071 .017
+ PRINTER PLOT
+ 144 1. 0.0 10. ASW10 { Plot limits: (-3.183, 3.346)
+BLANK card ending batch-mode plot cards
+BEGIN NEW DATA CASE
+BLANK
+
|