diff options
Diffstat (limited to 'benchmarks/dc35.dat')
| -rw-r--r-- | benchmarks/dc35.dat | 159 |
1 files changed, 159 insertions, 0 deletions
diff --git a/benchmarks/dc35.dat b/benchmarks/dc35.dat new file mode 100644 index 0000000..37c3fe0 --- /dev/null +++ b/benchmarks/dc35.dat @@ -0,0 +1,159 @@ +BEGIN NEW DATA CASE
+C BENCHMARK DC-35
+C U.M. test consisting of 3-phase induction motor startup. See Vol. X EMTP
+C Memoranda, 15 April 1980, page TPIM-6 onward. TMAX has been decreased,
+C DELTAT has been increased, and resistors shorting the rotor have been
+C increased (to help lower-precision computers). Also appears in Rule Book.
+PRINTED NUMBER WIDTH, 12, 2, { Request maximum precision (for 8 output columns)
+ .000400 .400
+ 1 1 0 00 1 -1 0
+ 5 5 20 20 100 100
+C The following 3 branches provide connectivity to ground:
+ 0 BUS-A0 1.0
+ 0 BUS-B0 1.0
+ 0 BUS-C0 1.0
+C Next comes the source impedance, as uncoupled series R-L branches:
+ 0BUS-A1BUS-A0 0.005 1.0 2
+ 0BUS-B1BUS-B0BUS-A1BUS-A0 2
+ 0BUS-C1BUS-C0BUS-A1BUS-A0 2
+C Next there is a near short of the rotor windings (squirrel cage case):
+ 0BUSRA1 1.E-5
+ 0BUSRB1 1.E-5
+ 0BUSRC1 1.E-5
+C Final branches are for rotor mass (capacitance) and damping (resistance):
+ 0BUS-OM 6.00E4
+ 0 BUS-OM 33.333 1
+BLANK card terminating branch cards
+BLANK card ends non-existent switch cards
+14BUS-A0 180.0 60.0 0.0
+14BUS-B0 180.0 60.0 -120.0
+14BUS-C0 180.0 60.0 +120.0
+11BUS-OM-1 -6.00
+19 UM { 1st of U.M. data cards to represent 3-phase induction motor
+0
+BLANK card ending Class-1 U.M. data
+ 4 1 1111BUS-OM 2 0.06 0.18850 { 1st machine table
+0.0 0.020291 0
+0.0 0.020291 0
+0.063 0.0001911 BUS-A1 1 0.0 { 1st winding card
+0.063 0.0003925 BUS-B1 1 0.0
+0.063 0.0003925 BUS-C1 1 0.0
+0.083 0.0003925 BUSRB1 1 0.0
+0.083 0.0003925 BUSRC1 1 0.0
+0.083 0.0003925 BUSRA1 1 0.0
+BLANK card ending all U.M. data
+BLANK card ending electric network source cards
+ BUS-A1BUS-B1BUS-C1BUS-A0BUS-OM
+C Step Time BUS-A1 BUS-B1 BUS-C1 BUS-A1 BUS-B1
+C BUS-A0 BUS-B0 BUS-C0
+C
+C UM-1 UM-1 UM-1 UM-1 UM-1
+C TQGEN OMEGM THETAM IPA IPB
+C 0 0.0 0.0 0.0 0.0 0.0 0.0
+C 0.0 0.0 0.0 0.0 0.0
+C 1 .4E-3 -98.574299 36.3155088 62.2587899 79.3830153 -29.245296
+C -.1388E-16 0.0 0.0 -19.695165 7.25584591
+C 2 .8E-3 -92.178447 20.8386935 71.3397538 79.6971707 -18.794915
+C -.00570624 0.0 0.0 -57.76825 18.6607698
+BLANK card ends requests for program output
+C Last step begins: 1000 0.4 -8.3684481 1.39626098 6.97218715 171.631552
+C Last step begins: -12.310167 187.573334 46.3605875 -8.8049393 23.504665
+C Maxima begin: 99.6139318 106.19115 100.446912 171.631552 171.624746
+C Maxima begin: 144.878041 197.090289 46.3605875 302.2867 263.869636
+C Associated times : .0912 .0132 .0356 0.4 .3556
+C Associated times : .0388 .2492 0.4 .1284 .1508
+C Minima begin: -103.15511 -99.851577 -103.80211 -171.82882 -171.84501
+C Minima begin: -186.32292 -.41620944 -.58668E-3 -299.62596 -384.19564
+C Associated times : .016 .0716 .0104 .3584 .364
+C Associated times : .0116 .0028 .0052 .0368 .0088
+C 78901234567890123456789012345678901234567890123456789012345678901234567890
+ 193.04 0.0 .40 UM-1 OMEGM Induction motor w in [rad/sec]
+ PRINTER PLOT { Now switch to the line printer (exactly the same plot card)
+ 193.04 0.0 .40 UM-1 OMEGM { Axis limits: (-0.004, 1.971)
+ 2Single-line, 78-character case title text !
+ First of 2 lines of multi-line, 78-byte, subheading text. !
+ Second and final line of multi-line labeling text. !
+ CALCOMP PLOT
+ 193.04 0.0 .40 UM-1 IPA
+ PEN PLOT { Divert vector graphics from screen to disk for printer
+ QUARTER PLOT { Blank col 32 means all 4 quarters of quarter plotting is used
+ 2Single-line case-title text for 1st of 4 quarters!
+ 193.04 0.0 .40 UM-1 OMEGM 1st of 4 quarterw in [rad/sec] !
+ 2Single-line case-title text for 2nd of 4 quarters!
+ 193.04 0.0 .40 UM-1 THETAM 2nd of 4 quarterAngle in radian!
+ 2Single-line case-title text for 3rd of 4 quarters!
+ 193.04 0.0 .40 UM-1 TQGEN 3rd of 4 quarterTorque in n-m !
+ 2Single-line case-title text for 4th of 4 quarters!
+ 193.04 0.0 .40 UM-1 IPA 4th of 4 quarterCurrent in amp !
+ SCREEN PLOT
+ 2Done with QUARTER PLOT; back to full size!
+ 193.04 0.0 .40 UM-1 IPB
+BLANK card ends the last plot card
+BEGIN NEW DATA CASE
+BLANK
+
+
+
+BEGIN NEW DATA CASE
+C 2nd of 2 subcases has the same data as the 1st, but is used to illustrate
+C CALCOMP PLOT usage only. Both SCREEN PLOT and PEN PLOT usage of the
+C Salford DOS extender motivated the addition of this data in Sept, 1990.
+PRINTED NUMBER WIDTH, 12, 2, { Request maximum precision (for 8 output columns)
+ .000400 .040 { Note the reduction from 1000 to 100 time steps for speed
+ 1 1 0 00 0 -1 0
+ 5 5 20 20
+C The following 3 branches provide connectivity to ground:
+ 0 BUS-A0 1.0
+ 0 BUS-B0 1.0
+ 0 BUS-C0 1.0
+C Next comes the source impedance, as uncoupled series R-L branches:
+ 0BUS-A1BUS-A0 0.005 1.0 2
+ 0BUS-B1BUS-B0BUS-A1BUS-A0 2
+ 0BUS-C1BUS-C0BUS-A1BUS-A0 2
+C Next there is a near short of the rotor windings (squirrel cage case):
+ 0BUSRA1 1.E-5
+ 0BUSRB1 1.E-5
+ 0BUSRC1 1.E-5
+C Final branches are for rotor mass (capacitance) and damping (resistance):
+ 0BUS-OM 6.00E4
+ 0 BUS-OM 33.333 1
+BLANK card terminating branch cards
+BLANK card ends non-existent switch cards
+14BUS-A0 180.0 60.0 0.0
+14BUS-B0 180.0 60.0 -120.0
+14BUS-C0 180.0 60.0 +120.0
+11BUS-OM-1 -6.00
+19 UM { 1st of U.M. data cards to represent 3-phase induction motor
+0
+BLANK card ending Class-1 U.M. data
+ 4 1 1111BUS-OM 2 0.06 0.18850 { 1st machine table
+0.0 0.020291 0
+0.0 0.020291 0
+0.063 0.0001911 BUS-A1 1 0.0 { 1st winding card
+0.063 0.0003925 BUS-B1 1 0.0
+0.063 0.0003925 BUS-C1 1 0.0
+0.083 0.0003925 BUSRB1 1 0.0
+0.083 0.0003925 BUSRC1 1 0.0
+0.083 0.0003925 BUSRA1 1 0.0
+BLANK card ending all U.M. data
+BLANK card ending electric network source cards
+ BUS-A1BUS-B1BUS-C1BUS-A0BUS-OM
+BLANK card ends requests for program output
+ 2Single-line, 78-character case title text !
+ First of 2 lines of multi-line, 78-byte, subheading text. !
+ Second and final line of multi-line labeling text. !
+ 194 4. 0.0 40. UM-1 OMEGM Induction motor w in [rad/sec] !
+ PEN PLOT { Now switch to the Epson printer (exactly the same plot card)
+ 2Single-line, 78-character case title text !
+ First of 2 lines of multi-line, 78-byte, subheading text. !
+ Second and final line of multi-line labeling text. !
+ 194 4. 0.0 40. UM-1 OMEGM Induction motor w in [rad/sec] !
+ SCREEN PLOT
+ First of 2 lines --- text is altered, though. !
+ Second 2 lines --- text is altered. !
+ 194 4. 0.0 40. UM-1 OMEGM Induction motor w in [rad/sec] !
+BLANK card ends the last plot card
+BEGIN NEW DATA CASE
+BLANK
+
+
|