summaryrefslogtreecommitdiffstats
path: root/benchmarks/dc10.dat
diff options
context:
space:
mode:
Diffstat (limited to 'benchmarks/dc10.dat')
-rw-r--r--benchmarks/dc10.dat378
1 files changed, 378 insertions, 0 deletions
diff --git a/benchmarks/dc10.dat b/benchmarks/dc10.dat
new file mode 100644
index 0000000..7e37b09
--- /dev/null
+++ b/benchmarks/dc10.dat
@@ -0,0 +1,378 @@
+BEGIN NEW DATA CASE
+C BENCHMARK DC-10
+C Companion to "CASCADED PI" test of preceding data case. Same answer
+C Use batch-mode solution only, since SPY sets TMAX to nearly infinity,
+C and then the 0 DELTAT will result in an error stop. 6 subcases total.
+C 20 June 2007, add the following comment merely to satisfy a new 6th
+C subcase which will illustrate CONCATENATE MONTE CARLO PL4 ( CMCP ) .
+C Since subcases 1 through 5 do not use .PL4 files significantly, the
+C switch from C-like to widexx format should go unnoticed :
+C FMTPL4 L4BYTE NEWPL4 Next card FORMAT ( 16X, A6, 2X, 2I8 )
+C CONCATENATE. wide08 0 0 <Force .PL4 type> key text anywhere
+C The preceding overrides .PL4 choices of STARTUP. Service begins 17 June 2007
+C A second illustration of just this declaration can be found in DCNEW-22.
+ 0.0 0.0 60.
+ 1 1
+ USE OLD { Extraneous request to undo preceding USE RL or AB will be rejected
+C Note about preceding, which was added 5 November 2001. This first
+C occurence will illustrate the warning message. For a legal use of
+C USE OLD, see the 2nd subcase.
+ 1RA1 1A1 .877 8.40 .1628
+ 2RB1 1B1 .747 4.14-.0252 .852 8.43 .1559
+ 3RC1 1C1 .735 3.47-.0067 .723 4.17-.0277 .829 8.46 .1571
+ 11A1 2A1 RA1 1A1
+ 21B1 2B1
+ 31C1 2C1
+ 02B1 3B1 13.1449.071 3
+ 12C1 4C1 RA1 1A1
+ 23A1 4A1
+ 33B1 4B1
+ 04C1 5C1 13.14 1
+ 04A1 5A1 13.1449.071 2
+ 04B1 5B1 4C1 5C1
+ 05C1 5G1 2B1 3B1
+ 05A1 5G1 2B1 3B1
+ 05B1 5G1 2B1 3B1
+ 5G1 5.0 13.14
+ 15B1 6B1 RA1 1A1
+ 25C1 6C1
+ 35A1 6A1
+ 6A1 7A1 4B1 5B1
+ 6B1 7B1 4C1 5C1
+ 6C1 7C1 4A1 5A1
+ 7A1 7G1 2B1 3B1
+ 7B1 7G1 2B1 3B1
+ 7C1 7G1 2B1 3B1
+ 7G1 5G1
+ 17A1 GA1 1.658 16.92 .3142
+ 27B1 GB1 1.446 8.34-.0554 1.704 16.86 .3118
+ 37C1 GC1 1.470 6.94-.0134 1.494 8.28-.0504 1.754 16.80 .3256
+BLANK card ending branch cards
+BLANK card ending switch cards (none, for this problem)
+14GA1 424.35 60. 0.0 -.1
+14RA1 424.35 60. 10.0 -.1
+14GB1 424.35 60. -120.0 -.1
+14RB1 424.35 60. -110.0 -.1
+14GC1 424.35 60. 120.0 -.1
+14RC1 424.35 60. 130.0 -.1
+C --------------+------------------------------
+C From bus name | Names of all adjacent busses.
+C --------------+------------------------------
+C RA1 |1A1 *
+C 1A1 |RA1 *2A1 *
+C RB1 |1B1 *
+C 1B1 |RB1 *2B1 *
+C RC1 |1C1 *
+C 1C1 |RC1 *2C1 *
+C 2A1 |1A1 *
+C 2B1 |1B1 *3B1 *
+C 2C1 |1C1 *4C1 *
+C 3B1 |2B1 *4B1 *
+C 4C1 |2C1 *5C1 *
+C 3A1 |4A1 *
+C Etc. (many more connections!) .....
+BLANK card ending all source cards
+C Total network loss P-loss by summing injections = 9.311041032866E+03
+C End injection: -12.95674346101 44.419110587004 -6432.468410934 9424.6247887975
+C End injection: -42.48741206788 -106.9593405 -6888.171205186 -0.6825172
+C Selective branch outputs follow (for column-80 keyed branches only). Any req
+C augmented to include branch voltage. But the converse is not true (a request
+C From To (======== Branch voltage Vkm = Vk - Vm =========) (==
+C bus K bus M Magnitude Degrees Real part Imag part Magni
+C 2B1 3B1 1.6180264E+03 -139.359766 -1.2277813E+03 -1.0538323E+03 3.9545
+C 4C1 5C1 3.9925372E+02 -138.975087 -3.0120669E+02 -2.6206500E+02 3.0384
+C 4A1 5A1 2.9415954E+00 92.386571 -1.2249239E-01 2.9390439E+00
+BLANK card ending output variable requests
+ PRINTER PLOT
+BLANK card ending plot cards
+BEGIN NEW DATA CASE
+C 2 of 6 subcases is unrelated to the first. It shows "BCTRAN" usage.
+C Illustration of 9x9 matrix representation of 3-phase, 3-winding
+C transformer as punched by the 2nd subcase of DCNEW-8. Note the use
+C of "USE AR" for better representation via [A] and [R] matrices.
+C To validate, compare with the same solution in 3rd subcase which has
+C no "USE AR" (it uses the more common "USE RL" for [R], [X]).
+PRINTED NUMBER WIDTH, 13, 2, { Request maximum precision (for 8 output columns)
+ .000200 .010
+ 1 1 1 1 1 -1
+ 5 5
+ USE AR
+$VINTAGE, 1,
+ 1H-1 26.512692374898 .2054666
+ 2L-1 -59.57848438329 0.0
+ 180.85474339841 .0742333
+ 3T-1 T-2 5.1245421614045 0.0
+ -71.06950226953 0.0
+ 76.560711306734 .0822
+ 4H-2 1.317410104146 0.0
+ -1.044760156768 0.0
+ -2.174181664407 0.0
+ 26.512692374898 .2054666
+ 5L-2 -1.044760156768 0.0
+ .10024670965949 0.0
+ 2.6475868140585 0.0
+ -59.57848438329 0.0
+ 180.85474339841 .0742333
+ 6T-2 -2.174181664407 0.0
+ 2.6475868140585 0.0
+ 2.4174362478358 0.0
+ 5.1245421614045 0.0
+ -71.06950226953 0.0
+ 76.560711306734 .0822
+ 7H-3 1.317410104146 0.0
+ -1.044760156768 0.0
+ -2.174181664407 0.0
+ 1.317410104146 0.0
+ -1.044760156768 0.0
+ -2.174181664407 0.0
+ 26.512692374898 .2054666
+ 8L-3 -1.044760156768 0.0
+ .10024670965949 0.0
+ 2.6475868140585 0.0
+ -1.044760156768 0.0
+ .10024670965949 0.0
+ 2.6475868140585 0.0
+ -59.57848438329 0.0
+ 180.85474339841 .0742333
+ 9 T-1 -2.174181664407 0.0
+ 2.6475868140585 0.0
+ 2.4174362478358 0.0
+ -2.174181664407 0.0
+ 2.6475868140585 0.0
+ 2.4174362478358 0.0
+ 5.1245421614045 0.0
+ -71.06950226953 0.0
+ 76.560711306734 .0822
+C USE RL This old, absolute form is replaced by the following universal form:
+ USE OLD { Beginning 5 November 2001, this will undo preceding USE AB or RL
+ GENA H-1 5.0
+ GENB H-2 5.0
+ GENC H-3 5.0
+ L-1 1.0
+BLANK card ending all branch cards
+BLANK card terminating the last switch card
+C Balanced 3-phase source of 400 Hz is connected to transformer delta side:
+14GENA 100. 60. -30. -1.
+14GENB 100. 60. -150. -1.
+14GENC 100. 60. 90. -1.
+BLANK card ending all source cards
+C Total network loss P-loss by summing injections = 1.731473944895E+02
+C Last gen: GENC .6123031769E-14 100. .11363284501067 .62844772817969
+C Last gen: 100. 90.0000000 .61808909033326 79.5827588
+ H-1 L-1 H-2 L-2 H-3 L-3
+C Step Time H-1 L-1 H-2 L-2 H-3
+C 0 0.0 83.84032026 .9255817033 -87.1526014 -35.2685815 -.568164225
+C 1 .2E-3 85.28151988 1.894879197 -82.9051812 -33.2151021 -7.86654662
+C 2 .4E-3 86.23807533 2.853434433 -78.1866756 -30.9728926 -15.1202281
+C 3 .6E-3 86.7045542 3.795799431 -73.0238961 -28.5546937 -22.2879919
+BLANK card ending program output-variable requests.
+C 50 .01 -80.9365963 -8.33136565 39.29673143 13.29079634 57.4223614
+C Variable max : 86.7045542 12.93833086 102.0061131 43.76610174 57.4223614
+C Times of max : .6E-3 .004 .0068 .0066 .01
+C Variable min : -86.757459 -8.33136565 -87.1526014 -35.2685815 -96.8960673
+C Times of min : .009 .01 0.0 0.0 .0042
+ PRINTER PLOT
+ 144 2. 0.0 10. L-1 L-2 L-3 { Axis limits: (-4.603, 4.377)
+BLANK card ending all plot cards
+BEGIN NEW DATA CASE
+C 3rd of 6 subcases has the same solution as the 2nd, but it is to be
+C obtained using [R], [L] branch cards (punched by the 1st subcase
+C of DCNEW-8) rather than [A], [R] branch cards of preceding case.
+C Note XOPT = 60, so we use not L but rather wL in ohms at 60 Hz.
+PRINTED NUMBER WIDTH, 13, 2, { Request maximum precision (for 8 output columns)
+ .000200 .010 60. { Note XOPT = 60 to agree with DCNEW-8 punched cards
+ 1 1 1 1 1 -1
+ 5 5
+ USE RL { Should not be needed, since RL units are the default starting choice
+$VINTAGE, 1,
+ 1H-1 .2054666 41432.097487177
+ 2L-1 0.0 19771.027634356
+ .0742333 9437.8794714269
+ 3T-1 T-2 0.0 15579.567888173
+ 0.0 7437.5502771391
+ .0822 5866.2181589463
+ 4H-2 0.0 -.0533106335013
+ 0.0 .95599943703728
+ 0.0 1.7517639180077
+ .2054666 41432.097487177
+ 5L-2 0.0 .95599943703728
+ 0.0 .73764739804435
+ 0.0 .83627686643027
+ 0.0 19771.027634356
+ .0742333 9437.8794714269
+ 6T-2 0.0 1.7517639180077
+ 0.0 .83627686643027
+ 0.0 .65959655490825
+ 0.0 15579.567888173
+ 0.0 7437.5502771391
+ .0822 5866.2181589463
+ 7H-3 0.0 -.0533106335013
+ 0.0 .95599943703728
+ 0.0 1.7517639180077
+ 0.0 -.0533106335013
+ 0.0 .95599943703728
+ 0.0 1.7517639180077
+ .2054666 41432.097487177
+ 8L-3 0.0 .95599943703728
+ 0.0 .73764739804435
+ 0.0 .83627686643027
+ 0.0 .95599943703728
+ 0.0 .73764739804435
+ 0.0 .83627686643027
+ 0.0 19771.027634356
+ .0742333 9437.8794714269
+ 9 T-1 0.0 1.7517639180077
+ 0.0 .83627686643027
+ 0.0 .65959655490825
+ 0.0 1.7517639180077
+ 0.0 .83627686643027
+ 0.0 .65959655490825
+ 0.0 15579.567888173
+ 0.0 7437.5502771391
+ .0822 5866.2181589463
+ GENA H-1 5.0
+ GENB H-2 5.0
+ GENC H-3 5.0
+ L-1 1.0
+BLANK card ending all branch cards
+BLANK card terminating the last switch card
+C Balanced 3-phase source of 400 Hz is connected to transformer delta side:
+14GENA 100. 60. -30. -1.
+14GENB 100. 60. -150. -1.
+14GENC 100. 60. 90. -1.
+BLANK card ending all source cards
+C Total network loss P-loss by summing injections = 1.731473944910E+02C 100. .11363284500541 .6284477281075 30.904454513041 31.422386405375
+C 90.0000000 .61808909026083 79.5827588 5.6816422502705 0.9835171
+C Step Time H-1 L-1 H-2 L-2 H-3
+C 0 0.0 83.84032026 .9255817034 -87.1526014 -35.2685815 -.568164225
+C 1 .2E-3 85.28151988 1.894879197 -82.9051812 -33.2151021 -7.86654662
+C 2 .4E-3 86.23807533 2.853434433 -78.1866756 -30.9728926 -15.1202281
+C 3 .6E-3 86.7045542 3.795799431 -73.0238961 -28.5546937 -22.2879919
+ H-1 L-1 H-2 L-2 H-3 L-3
+BLANK card ending program output-variable requests.
+C 50 .01 -80.9365963 -8.33136565 39.29673143 13.29079634 57.4223614
+C Variable max : 86.7045542 12.93833086 102.0061131 43.76610174 57.4223614
+C Times of max : .6E-3 .004 .0068 .0066 .01
+C Variable min : -86.757459 -8.33136565 -87.1526014 -35.2685815 -96.8960673
+C Times of min : .009 .01 0.0 0.0 .0042
+ PRINTER PLOT
+ 144 2. 0.0 10. L-1 L-2 L-3 { Axis limits: (-4.603, 4.377)
+$WIDTH, 79,
+BLANK card ending all plot cards
+BEGIN NEW DATA CASE
+C 4th of 6 subcases is unrelated to the preceding. It shows "SSOMIT"
+C usage as introduced 7 November 1998. More precisely, this 4th case
+C does _not_ involve SSOMIT to omit a linear branch during the
+C phasor solution. The switch (LEFT, RIGHT) is open, isolating 50 Hz
+C on the left from 60 Hz on the right. But, because this switch is
+C paralleled by a leakage branch (snubber circuits in case of hvdc),
+C phasor solution logic will reject the mixing of frequencies. Use of
+C an all-resistive network allows a large time step for illustration.
+$WIDTH, 132, { Back to full width to make new 4th and 5th subcases look better
+PRINTED NUMBER WIDTH, 9, 2,
+ .001 .020
+ 1 1 1 1 1
+ GEN1 LEFT 0.5 1
+ RIGHT GEN2 0.5 1
+ LEFT RIGHT 1.E4
+BLANK card ending branch cards
+ LEFT RIGHT .010 1.0 1
+BLANK card ending switch cards
+14GEN1 1.0 50. 0. -1.
+14GEN2 1.0 60. 0. -1.
+BLANK card ending source cards
+ 1
+C PRINTER PLOT
+ 194 2. 0.0 20. LEFT RIGHT
+BLANK card ending plot cards
+BEGIN NEW DATA CASE
+C 5th of 6 subcases is the same as the preceding except for the name
+C of the snubber branch that parallels the switch. It shows "SSOMIT"
+C has the effect of omitting this branch during the phasor solution,
+C thereby avoiding the illegal mixing of 50- and 60-Hz excitation (a
+C problem of the preceding data subset). See January, 1999, newsletter.
+PRINTED NUMBER WIDTH, 9, 2,
+ .001 .020
+ 1 1 1 1 1
+ GEN1 LEFT 0.5 1
+ RIGHT GEN2 0.5 1
+ LEFT RIGHT NAME SSOMIT 1.E4 { Snubber to be ignored during phasor solution
+BLANK card ending branch cards
+ LEFT RIGHT .010 1.0 { Switch is open during phasor solution } 1
+BLANK card ending switch cards
+14GEN1 1.0 50. 0. -1.
+14GEN2 1.0 60. 0. -1.
+BLANK card ending source cards
+C First 4 output variables are electric-network voltage differences (upper voltage minus lower voltage);
+C Next 3 output variables are branch currents (flowing from the upper node to the lower node);
+C Step Time RIGHT LEFT GEN1 GEN2 LEFT GEN1 RIGHT
+C RIGHT LEFT GEN2
+C 0 0.0 1.0 1.0 1.0 1.0 0.0 0.0 0.0
+C 1 .1E-2 .929778 .951055 .951057 .929776 0.0 .213E-5 .213E-5
+C 2 .002 .728973 .809013 .809017 .728969 0.0 .8E-5 .8E-5
+C 3 .003 .425787 .587777 .587785 .425779 0.0 .162E-4 .162E-4
+ 1 { Output all node voltages
+C 19 .019 .79424 .79424 .951057 .637424 .313633 .313633 .313633
+C 20 .02 .654508 .654508 1.0 .309017 .690983 .690983 .690983
+C Variable max : 1.0 1.0 1.0 1.0 .690983 .690983 .690983
+C Times of max : 0.0 0.0 0.0 0.0 .02 .02 .02
+C Variable min : -.99211 -.99999 -1. -.99211 -.84484 -.84484 -.84484
+C Times of min : .008 .01 .01 .008 .014 .014 .014
+ PRINTER PLOT
+ 194 3. 0.0 20. LEFT RIGHT { Axis limits: (-8.448, 6.910)
+BLANK card ending plot cards
+BEGIN NEW DATA CASE
+C 6th of 6 subcases is unrelated to preceding. It illustrates use of
+C CONCATENATE MONTE CARLO PL4 ( CMCP ) which becme available with the
+C UTPF update of 20 June 2007. Data is copied from DC-24, so the
+C solution is well known. What is new is the .PL4 file, which will
+C contain all 3 signal sets, for the 3 energizations, in 1 disk file.
+C For illustration, use formatted .PL4 as per the <Force .PL4 type>
+C declaration of the 1st subcase (mandatory location if present).
+CONCATENATE MONTE CARLO PL4 { New form of IPLOT= 54321 frees IPLOT for frequency
+PRINTED NUMBER WIDTH, 13, 2, { Request maximum precision (for 8 output columns)
+REPEATABLE RANDOM NUMBERS { Same as NSEED=1 (this overrides zero value below)
+OMIT BASE CASE { Comment out this card, if a base case solution is to be added
+ 100.E-6 20.E-3 60.
+ 1 1 1 2 1 -1 1 1 3
+C ISW ITEST IDIST IMAX IDICE KSTOUT NSEED
+ 1 1 0 0 1 { KSTOUT is blank, not 0! } 0
+ 2 2 10 10 { Printout frequency change only if base case
+ 0GENA A1 7. 2
+ 0GENB B1 7. 1
+ 0GENC C1 7. 2
+ 0ENDA A10 7. 3
+ 0ENDB B10 7.
+ 0ENDC C10 7.
+-1ASW1 A5 .3 2.1146 0.645 50. 0
+-2BSW1 B5 .0268 .5397 0.021 50. 0
+-3CSW1 C5
+ 0A5 A5F 1.
+ 0B5 B5F 1.
+ 0C5 C5F 1.
+-1A5F ASW10 ASW1 A5
+-2B5F BSW10
+-3C5F CSW10
+BLANK card ending branch cards
+76A1 ASW1 2.E-3 .1E-3 STATISTICS
+ B1 BSW1 4.E-3 0.5E-3 STATISTICS 4
+ C1 CSW1 6.E-3 1.E-3 STATISTICS
+ A10 ASW10 7.95E-3 1.0
+ B10 BSW10 9.95E-3 1.0
+ C10 CSW10 11.95E-3 1.0
+BLANK card ending switch cards
+14GENA 303. 60. 0.0 -1.
+14GENB 303. 60. -120.0 -1.
+14GENC 303. 60. 120.0 -1.
+14ENDA 303. 60. - 10.0 -1.
+14ENDB 303. 60. -130.0 -1.
+14ENDC 303. 60. 110.0 -1.
+BLANK card ending source cards
+$OPEN, UNIT=LUNIT9 FILE=dc24at40.ext STATUS=UNKNOWN FORM=UNFORMATTED RECL=1000 !
+ ASW10 BSW10 CSW10 { Request for these node voltage outputs
+BLANK card ending the specification of program outputs (node voltages, here)
+$OPEN, UNIT=LUNIT2 STATUS=SCRATCH FORM=UNFORMATTED { Disconnect *.BIN on LUNIT2
+-1 100. GENA A1
+BLANK card ending statistical tabulation requests
+BEGIN NEW DATA CASE
+BLANK
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 22:01:54 +0000