diff options
| author | Angelo Rossi <angelo.rossi.homelab@gmail.com> | 2023-06-21 12:04:16 +0000 |
|---|---|---|
| committer | Angelo Rossi <angelo.rossi.homelab@gmail.com> | 2023-06-21 12:04:16 +0000 |
| commit | b18347ffc9db9641e215995edea1c04c363b2bdf (patch) | |
| tree | f3908dc911399f1a21e17d950355ee56dc0919ee /benchmarks/dc66.dat | |
Initial commit.
Diffstat (limited to 'benchmarks/dc66.dat')
| -rw-r--r-- | benchmarks/dc66.dat | 210 |
1 files changed, 210 insertions, 0 deletions
diff --git a/benchmarks/dc66.dat b/benchmarks/dc66.dat new file mode 100644 index 0000000..fab8e8c --- /dev/null +++ b/benchmarks/dc66.dat @@ -0,0 +1,210 @@ +BEGIN NEW DATA CASE shots:40 part:-1
+C BENCHMARK DC-66
+C Parallel Monte Carlo simulation is the only legitimate reason for the
+C solution of this data case, which is derived from DC-24. See the
+C article by Meyer and Liu in the December, 1988, issue of EMTP News.
+C Note that the number of energizations has been set to NENERG = 999
+C whereas output is minimized: no connectivity, no phasor solution, and
+C finally, no miniature printer plots of switch times. About special
+C features, the central statistics file PARALLEL.LIS must exist before
+C the simulation has begun. If it does not, it should be created using
+C the INIT command of OPMC (OBSERVE PARALLEL MONTE CARLO). So as
+C to identify the process independent of the STARTUP file, note the
+C use of "USER IDENTIFICATION" to override USERID of STARTUP. The
+C creation of full tables (including "LABCOM" storage) is illustrated
+C (see MEMSAV = 1). This is why there is $OPEN usage on both units
+C LUNIT2 = 2 and LUNIT9 = 9. One solution needs this. But all the
+C remaining ones should have MEMSAV = 0, in which case the file OPEN
+C and CLOSE on unit LUNIT2 can and should be deleted.
+PRINTED NUMBER WIDTH, 13, 2, { Request maximum precision (for 8 output columns)
+USER IDENTIFICATION Paris FORMATTED ! { Overrides A6 USERID of STARTUP for plots
+MINIMUM TABLE SIZES { Request creation of LISTSIZE.PMC during initialization
+CENTRAL STATISTICS FILE { Request word that precedes the disk file name
+c:\atp\parallel.lis { Leading percent sign avoids confusion of "/" in column 1
+OMIT BASE CASE { Comment out this card, if a base case solution is to be added
+ 100.E-6 20.E-3 60.
+ 1 1 0 0 1 -1 0 0 200
+C ISW ITEST IDIST IMAX IDICE KSTOUT NSEED
+ 1 1 0 0 1 { KSTOUT is blank, not 0! } 1
+ 2 2 10 10 { Printout frequency change only if base case
+ 0GENA A1 7. 2
+ 0GENB B1 7. 1
+ 0GENC C1 7. 2
+ 0ENDA A10 7. 3
+ 0ENDB B10 7.
+ 0ENDC C10 7.
+-1ASW1 A5 .3 2.1146 0.645 50. 0
+-2BSW1 B5 .0268 .5397 0.021 50. 0
+-3CSW1 C5
+ 0A5 A5F 1.
+ 0B5 B5F 1.
+ 0C5 C5F 1.
+-1A5F ASW10 ASW1 A5
+-2B5F BSW10
+-3C5F CSW10
+BLANK card ending branch cards
+76A1 ASW1 2.E-3 .1E-3 STATISTICS
+ B1 BSW1 4.E-3 0.5E-3 STATISTICS 4
+ C1 CSW1 6.E-3 1.E-3 STATISTICS
+ A10 ASW10 7.95E-3 1.0
+ B10 BSW10 9.95E-3 1.0
+ C10 CSW10 11.95E-3 1.0
+BLANK card ending switch cards
+14GENA 303. 60. 0.0 -1.
+14GENB 303. 60. -120.0 -1.
+14GENC 303. 60. 120.0 -1.
+14ENDA 303. 60. - 10.0 -1.
+14ENDB 303. 60. -130.0 -1.
+14ENDC 303. 60. 110.0 -1.
+BLANK card ending source cards
+ ASW10 BSW10 CSW10 { Request for these node voltage outputs
+BLANK card ending the specification of program outputs (node voltages, here)
+BLANK card ending statistical tabulation requests --- NO SWITCH PLOTS ---
+BEGIN NEW DATA CASE shots:10 part:1
+C 2nd of 4 subcases will do 10 shots as the 1st of 4 parts (see preceding card)
+PRINTED NUMBER WIDTH, 13, 2, { Request maximum precision (for 8 output columns)
+USER IDENTIFICATION Paris FORMATTED ! { Overrides A6 USERID of STARTUP for plots
+MINIMUM TABLE SIZES { Request creation of LISTSIZE.PMC during initialization
+CENTRAL STATISTICS FILE { Request word that precedes the disk file name
+c:\atp\parallel.lis { Leading percent sign avoids confusion of "/" in column 1
+OMIT BASE CASE { Comment out this card, if a base case solution is to be added
+ 100.E-6 20.E-3 60.
+ 1 1 0 0 1 -1 0 0 200
+C ISW ITEST IDIST IMAX IDICE KSTOUT NSEED
+ 1 1 0 0 1 { KSTOUT is blank, not 0! } 1
+ 2 2 10 10 { Printout frequency change only if base case
+ 0GENA A1 7. 2
+ 0GENB B1 7. 1
+ 0GENC C1 7. 2
+ 0ENDA A10 7. 3
+ 0ENDB B10 7.
+ 0ENDC C10 7.
+-1ASW1 A5 .3 2.1146 0.645 50. 0
+-2BSW1 B5 .0268 .5397 0.021 50. 0
+-3CSW1 C5
+ 0A5 A5F 1.
+ 0B5 B5F 1.
+ 0C5 C5F 1.
+-1A5F ASW10 ASW1 A5
+-2B5F BSW10
+-3C5F CSW10
+BLANK card ending branch cards
+76A1 ASW1 2.E-3 .1E-3 STATISTICS
+ B1 BSW1 4.E-3 0.5E-3 STATISTICS 4
+ C1 CSW1 6.E-3 1.E-3 STATISTICS
+ A10 ASW10 7.95E-3 1.0
+ B10 BSW10 9.95E-3 1.0
+ C10 CSW10 11.95E-3 1.0
+BLANK card ending switch cards
+14GENA 303. 60. 0.0 -1.
+14GENB 303. 60. -120.0 -1.
+14GENC 303. 60. 120.0 -1.
+14ENDA 303. 60. - 10.0 -1.
+14ENDB 303. 60. -130.0 -1.
+14ENDC 303. 60. 110.0 -1.
+BLANK card ending source cards
+ ASW10 BSW10 CSW10 { Request for these node voltage outputs
+BLANK card ending the specification of program outputs (node voltages, here)
+BLANK card ending statistical tabulation requests --- NO SWITCH PLOTS ---
+BEGIN NEW DATA CASE shots:15 part:2
+C 3rd of 4 subcases will do 15 shots as the 2nd of 4 parts (see preceding card)
+PRINTED NUMBER WIDTH, 13, 2, { Request maximum precision (for 8 output columns)
+USER IDENTIFICATION Paris FORMATTED ! { Overrides A6 USERID of STARTUP for plots
+MINIMUM TABLE SIZES { Request creation of LISTSIZE.PMC during initialization
+CENTRAL STATISTICS FILE { Request word that precedes the disk file name
+c:\atp\parallel.lis { Leading percent sign avoids confusion of "/" in column 1
+OMIT BASE CASE { Comment out this card, if a base case solution is to be added
+ 100.E-6 20.E-3 60.
+ 1 1 0 0 1 -1 0 0 200
+C ISW ITEST IDIST IMAX IDICE KSTOUT NSEED
+ 1 1 0 0 1 { KSTOUT is blank, not 0! } 1
+ 2 2 10 10 { Printout frequency change only if base case
+ 0GENA A1 7. 2
+ 0GENB B1 7. 1
+ 0GENC C1 7. 2
+ 0ENDA A10 7. 3
+ 0ENDB B10 7.
+ 0ENDC C10 7.
+-1ASW1 A5 .3 2.1146 0.645 50. 0
+-2BSW1 B5 .0268 .5397 0.021 50. 0
+-3CSW1 C5
+ 0A5 A5F 1.
+ 0B5 B5F 1.
+ 0C5 C5F 1.
+-1A5F ASW10 ASW1 A5
+-2B5F BSW10
+-3C5F CSW10
+BLANK card ending branch cards
+76A1 ASW1 2.E-3 .1E-3 STATISTICS
+ B1 BSW1 4.E-3 0.5E-3 STATISTICS 4
+ C1 CSW1 6.E-3 1.E-3 STATISTICS
+ A10 ASW10 7.95E-3 1.0
+ B10 BSW10 9.95E-3 1.0
+ C10 CSW10 11.95E-3 1.0
+BLANK card ending switch cards
+14GENA 303. 60. 0.0 -1.
+14GENB 303. 60. -120.0 -1.
+14GENC 303. 60. 120.0 -1.
+14ENDA 303. 60. - 10.0 -1.
+14ENDB 303. 60. -130.0 -1.
+14ENDC 303. 60. 110.0 -1.
+BLANK card ending source cards
+ ASW10 BSW10 CSW10 { Request for these node voltage outputs
+BLANK card ending the specification of program outputs (node voltages, here)
+BLANK card ending statistical tabulation requests --- NO SWITCH PLOTS ---
+BEGIN NEW DATA CASE shots:12 part:4
+C 4th of 4 subcases will do 12 shots as the 4th of 4 parts (see preceding card)
+PRINTED NUMBER WIDTH, 13, 2, { Request maximum precision (for 8 output columns)
+USER IDENTIFICATION Paris FORMATTED ! { Overrides A6 USERID of STARTUP for plots
+MINIMUM TABLE SIZES { Request creation of LISTSIZE.PMC during initialization
+CENTRAL STATISTICS FILE { Request word that precedes the disk file name
+c:\atp\parallel.lis { Leading percent sign avoids confusion of "/" in column 1
+OMIT BASE CASE { Comment out this card, if a base case solution is to be added
+ 100.E-6 20.E-3 60.
+ 1 1 0 0 1 -1 0 0 200
+C ISW ITEST IDIST IMAX IDICE KSTOUT NSEED
+ 1 1 0 0 1 { KSTOUT is blank, not 0! } 1
+ 2 2 10 10 { Printout frequency change only if base case
+ 0GENA A1 7. 2
+ 0GENB B1 7. 1
+ 0GENC C1 7. 2
+ 0ENDA A10 7. 3
+ 0ENDB B10 7.
+ 0ENDC C10 7.
+-1ASW1 A5 .3 2.1146 0.645 50. 0
+-2BSW1 B5 .0268 .5397 0.021 50. 0
+-3CSW1 C5
+ 0A5 A5F 1.
+ 0B5 B5F 1.
+ 0C5 C5F 1.
+-1A5F ASW10 ASW1 A5
+-2B5F BSW10
+-3C5F CSW10
+BLANK card ending branch cards
+76A1 ASW1 2.E-3 .1E-3 STATISTICS
+ B1 BSW1 4.E-3 0.5E-3 STATISTICS 4
+ C1 CSW1 6.E-3 1.E-3 STATISTICS
+ A10 ASW10 7.95E-3 1.0
+ B10 BSW10 9.95E-3 1.0
+ C10 CSW10 11.95E-3 1.0
+BLANK card ending switch cards
+14GENA 303. 60. 0.0 -1.
+14GENB 303. 60. -120.0 -1.
+14GENC 303. 60. 120.0 -1.
+14ENDA 303. 60. - 10.0 -1.
+14ENDB 303. 60. -130.0 -1.
+14ENDC 303. 60. 110.0 -1.
+BLANK card ending source cards
+ ASW10 BSW10 CSW10 { Request for these node voltage outputs
+BLANK card ending the specification of program outputs (node voltages, here)
+BLANK card ending statistical tabulation requests --- NO SWITCH PLOTS ---
+BEGIN NEW DATA CASE
+C 5th of 4 subcases shows the results of the preceding 4 using OPMC (OBSERVE ..
+CENTRAL STATISTICS FILE { Request word that precedes the disk file name
+c:\atp\parallel.lis { Leading percent sign avoids confusion of "/" in column 1
+OBSERVE PARALLEL MONTE CARLO
+SHOW ALL { Command of OPMC to show all parts active within central statistics file
+SHOW TOP { Show extra header records (supporting material)
+QUIT { Command of OPMC to quit this universal display routine
+BEGIN NEW DATA CASE
+BLANK
|