diff options
| author | Angelo Rossi <angelo.rossi.homelab@gmail.com> | 2023-06-21 12:04:16 +0000 |
|---|---|---|
| committer | Angelo Rossi <angelo.rossi.homelab@gmail.com> | 2023-06-21 12:04:16 +0000 |
| commit | b18347ffc9db9641e215995edea1c04c363b2bdf (patch) | |
| tree | f3908dc911399f1a21e17d950355ee56dc0919ee /benchmarks/dc46.dat | |
Initial commit.
Diffstat (limited to 'benchmarks/dc46.dat')
| -rw-r--r-- | benchmarks/dc46.dat | 260 |
1 files changed, 260 insertions, 0 deletions
diff --git a/benchmarks/dc46.dat b/benchmarks/dc46.dat new file mode 100644 index 0000000..0f7b92b --- /dev/null +++ b/benchmarks/dc46.dat @@ -0,0 +1,260 @@ +BEGIN NEW DATA CASE
+C BENCHMARK DC-46
+C This is the 2nd half of the DC-45/46 matched pair, which together give
+C an approximation to the total of DC-33. Postprocessing using TACS is
+C involved. But note that here we skip every other point. Also, we use
+C DELTAT is an independent, predictable fashion, as the named delay on
+C a supplemental device that delays the signal GEN by one time step.
+C For answers that exactly agree with DC-33, decrease DELTAT from 100
+C to 50 microsec, and convert ",2," to ",1," on POSTPROCESS card.
+C 26 June 1995, modify as will be described in the July newsletter.
+C Original data case will be copied below. New 2nd subcase added.
+C --- template for next card. MULPPF LUNPPF L63TYP
+POSTPROCESS PLOT FILE 2 63 3
+$OPEN, UNIT=63 FILE=[]dc45.pl4 ! { Expected to be C-like (L4BYTE = 1)
+ .000100 .050 { Note DELTAT is twice that of DC-45, since use every 2nd step
+ 1 1 0 0 1 -1 0 2
+ 5 5 20 20 50 50
+TACS STAND ALONE
+ 1FLUX +GEN
+ 1.0
+ 0.0 1.0
+ 1NRG +POWER
+ 1.0
+ 0.0 1.0
+11GEN 1.0
+11CURR 2.0
+99POWER = GEN * ( -CURR )
+33GEN CURR POWER FLUX GEN_1 NRG
+C The following transport delay copies GEN, only delays the output by DELTAT
+C 78901234567890123456789012345678901234567890123456789012345678901234567890
+99GEN_1 53+GEN { Type-53 supplemental device with named delay} .001 DELTAT
+C Step Time GEN CURR POWER FLUX GEN_1
+C 0 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00
+C 1 1.00000E-04 3.76732E+02-1.04694E+00 3.94417E+02 1.88366E-02 0.00000E+00
+C 2 2.00000E-04 3.75929E+02-1.04552E+00 3.93040E+02 5.64697E-02 3.76732E+02
+C 3 3.00000E-04 3.74591E+02-1.08895E+00 4.07913E+02 9.39957E-02 3.75929E+02
+BLANK card ending all TACS data cards
+C 400 4.00000E-02 -3.04999E+02 1.07014E+00 3.26391E+02 5.68879E-01-2.96431E+02
+C 450 4.50000E-02 -1.16499E+02 2.76576E+00 3.22210E+02-9.69816E-01-1.29930E+02
+C 500 5.00000E-02 3.77000E+02-1.43750E+00 5.41938E+02-1.88500E-02 3.76732E+02
+C Row Name Minimum Maximum Time of min
+C 1 GEN -3.7700000000E+02 3.7700000000E+02 0.025000
+C 2 CURR -3.4999091625E+00 3.4999091625E+00 0.037500
+C 3 POWER -3.4019847371E+02 5.8499138215E+02 0.005200
+C 4 FLUX -1.0187551143E+00 9.8105511427E-01 0.012500
+C 5 GEN_1 -3.7700000000E+02 3.7697024536E+02 0.025100
+C 6 NRG 0.0000000000E+00 1.3570878894E+01 0.000000
+ PRINTER PLOT
+ 144 2. 0.0 20. POWER { Axis limits: (-3.402, 5.850)
+BLANK card ending plot cards
+BEGIN NEW DATA CASE
+C BENCHMARK DC-46
+C 2nd of 5 subcases produces the same solution, but illustrates the new
+C Type-25 TACS sources within a TACS HYBRID framework. Zero for LUNPPF
+C switches the I/O unit from 22 (LUNIT2 of preceding case) to the default
+C number 63. The $OPEN must follow the PPF declaration that makes
+C LUNPPF = 63 since for C-like files, this is needed for CIMAG2 to
+C define the handle LHTACS as required by POSTPF (POSTP1 & POSTP2).
+$CLOSE, UNIT=63 STATUS=KEEP { Disconnect file of preceding subcase
+C Template for next card. MULPPF LUNPPF L63TYP
+POSTPROCESS PLOT FILE 2 3
+$OPEN, UNIT=63 FILE=[]dc45.pl4 ! { Expected to be C-like (L4BYTE = 1)
+ .000100 .050 { Note DELTAT is twice that of DC-45, since use every 2nd step
+ 1 1 0 0 1 -1 0 2
+ 5 5 20 20 50 50
+TACS HYBRID
+ 1FLUX +GEN
+ 1.0
+ 0.0 1.0
+ 1NRG +POWER
+ 1.0
+ 0.0 1.0
+25GEN 1.0 { 1st of 2 sources is defined by 1st signal of .PL4 file
+25CURR 2.0 { 2nd of 2 sources is defined by 2nd signal of .PL4 file
+99POWER = GEN * ( -CURR )
+33GEN CURR POWER FLUX GEN_1 NRG
+C The following transport delay copies GEN, only delays the output by DELTAT
+C 78901234567890123456789012345678901234567890123456789012345678901234567890
+99GEN_1 53+GEN { Type-53 supplemental device with named delay} .001 DELTAT
+BLANK card ending all TACS data cards
+ BUS3 1.0
+BLANK card ending electric network branches
+BLANK card ending switches
+11BUS3 1.0
+BLANK card ending electric network source cards.
+BLANK card ending node voltage outputs
+ PRINTER PLOT
+ 194 2. 0.0 20. TACS POWER
+BLANK card ending plot cards
+BEGIN NEW DATA CASE
+C BENCHMARK DC-46
+C 3rd of 5 subcases produces the same solution, but illustrates the new
+C connection to a plot file from MODELS. Just like with TACS, first line
+C of plot data at time t=0 is ignored. It is not required to use MODELS
+C as STAND ALONE, but can also be mixed with solution of a circuit.
+C Template for next card. MULPPF LUNPPF L63TYP
+POSTPROCESS PLOT FILE 2 63 3
+$OPEN, UNIT=63 FILE=[]dc45.pl4 ! { Expected to be C-like (L4BYTE = 1)
+ .000100 .050 { Note DELTAT is twice that of DC-45, since use every 2nd step
+ 1 1 0 0 1 -1 0 2
+ 5 5 20 20 50 50
+MODELS STAND ALONE
+INPUT gen {PL4(1)}, curr {PL4(2)}
+MODEL postprocess_example
+ INPUT voltage, current
+ VAR flux, energy, power, gen_1
+ INIT
+ integral(voltage) := 0
+ integral(power) := 0
+ histdef(voltage) := 0 -- needed for the delay function at t=0
+ ENDINIT
+ EXEC
+ flux := integral(voltage)
+ energy := integral(power)
+ power := voltage * current
+ gen_1 := delay(voltage, timestep)
+ ENDEXEC
+ENDMODEL
+USE postprocess_example AS test
+ INPUT voltage := gen, current := -curr
+ENDUSE
+RECORD gen AS gen curr AS curr
+ test.power AS power test.flux AS flux
+ test.gen_1 AS gen_1 test.energy AS nrg
+ENDMODELS
+BLANK card ending plot cards
+BEGIN NEW DATA CASE
+C 4th of 5 subcases is the same as the first except that a Pisa-format
+C .PL4 file is being used rather than a conventional, old, C-like .PL4
+C 12 March 2002, PPF was made compatible with Pisa-format C-like .PL4
+C files. In case the unit-63 .PL4 file is missing, it can be created
+C easily enough by simulation of DC-45. Make sure NEWPL4 in STARTUP
+C has value 2 before the simulation begins, however. When complete,
+C rename DC45.PL4 to DC45PISA.PL4. For PPF use, note that L63TYP
+C has been changed from value 3 (conventional C-like file) to value 4
+C (Pisa-format C-like):
+C --- template for next card. MULPPF LUNPPF L63TYP
+POSTPROCESS PLOT FILE 2 63 4 { 4 ==> Pisa-format
+$OPEN, UNIT=63 FILE=[]dc45pisa.pl4 ! { Expected to be C-like (L4BYTE = 1)
+C Note about preceding: Use of "[]" first became available for a $OPEN
+C file name on 14 December 2002. Following subcase also illustrates.
+ .000100 .050 { Note DELTAT is twice that of DC-45, since use every 2nd step
+ 1 1 0 0 1 -1 0 2
+ 5 5 20 20 50 50
+TACS STAND ALONE
+ 1FLUX +GEN
+ 1.0
+ 0.0 1.0
+ 1NRG +POWER
+ 1.0
+ 0.0 1.0
+11GEN 1.0
+11CURR 2.0
+99POWER = GEN * ( -CURR )
+33GEN CURR POWER FLUX GEN_1 NRG
+C The following transport delay copies GEN, only delays the output by DELTAT
+C 78901234567890123456789012345678901234567890123456789012345678901234567890
+99GEN_1 53+GEN { Type-53 supplemental device with named delay} .001 DELTAT
+BLANK card ending all TACS data cards
+BLANK card ending plot cards
+BEGIN NEW DATA CASE
+C 5th of 5 subcases is the same as the first except that a widexx-format
+C .PL4 file is being used rather than a conventional, old, C-like .PL4
+C 11 December 2002, PPF was made compatible with widexx-format .PL4 file.
+C In case the unit-63 .PL4 file is missing, it can be created easily
+C Make sure FMTPL4 in STARTUP has value "wide11" before the simulation
+C begins, however. When complete, rename DC45.PL4 to DC45WIDE.011
+C For PPF use, note that L63TYP has been changed from value 3 (for
+C conventional C-like file) to value 5 (widexx-format). About the 11,
+C it should be explained that this is the program limit for optimal
+C encoding. A better comparison requires 12, but if used, ATP will
+C drop the optimal and switch to normal E-field encoding. So, a column
+C width of 11 is used to produce the maximum precision while retaining
+C the desired optimal encoding. Using Mike Albert's free FC then will
+C show perfect agreement between this .LIS output and the .LIS output
+C of the first subcase except for 2 columns, which will differ in the
+C final digit or two. Look for newsletter writing on this subject in
+C the April, 2003, issue or later. Mustafa Kizilcay made the request
+C for widexx compatibility, and this data proves that it works. WSM.
+C --- template for next card. MULPPF LUNPPF L63TYP
+POSTPROCESS PLOT FILE 2 63 5
+$OPEN, UNIT=63 FILE=[]dc45wide.011 STATUS=OLD FORM=FORMATTED !
+ .000100 .050 { Note DELTAT is twice that of DC-45, since use every 2nd step
+ 1 1 0 0 1 -1 0 2
+ 5 5 20 20 50 50
+TACS STAND ALONE
+ 1FLUX +GEN
+ 1.0
+ 0.0 1.0
+ 1NRG +POWER
+ 1.0
+ 0.0 1.0
+11GEN 1.0
+11CURR 2.0
+99POWER = GEN * ( -CURR )
+33GEN CURR POWER FLUX GEN_1 NRG
+C The following transport delay copies GEN, only delays the output by DELTAT
+C 78901234567890123456789012345678901234567890123456789012345678901234567890
+99GEN_1 53+GEN { Type-53 supplemental device with named delay} .001 DELTAT
+BLANK card ending all TACS data cards
+ PRINTER PLOT
+ 144 2. 0.0 20. POWER { Axis limits: (-3.402, 5.850)
+BLANK card ending plot cards
+BEGIN NEW DATA CASE
+BLANK
+EOF
+
+
+
+BEGIN NEW DATA CASE
+C BENCHMARK DC-46
+C This is the 2nd half of the DC-45/46 matched pair, which together give
+C an approximation to the total of DC-33. Postprocessing using TACS is
+C involved. But note that here we skip every other point. Also, we use
+C DELTAT is an independent, predictable fashion, as the named delay on
+C a supplemental device that delays the signal GEN by one time step.
+C For answers that exactly agree with DC-33, decrease DELTAT from 100
+C to 50 microsec, and convert ",2," to ",1," on POSTPROCESS card.
+$OPEN, UNIT=22 FILE=dc45.pl4 ! { Expected to be C-like (L4BYTE = 1)
+POSTPROCESS PLOT FILE, 2, { Use every other step from ".PL4" plot file of DC-45
+ .000100 .050 { Note DELTAT is twice that of DC-45, since use every 2nd step
+ 1 1 0 0 1 -1 0 2
+ 5 5 20 20 50 50
+TACS STAND ALONE
+ 1FLUX +GEN
+ 1.0
+ 0.0 1.0
+ 1NRG +POWER
+ 1.0
+ 0.0 1.0
+11GEN 1.0
+11CURR 2.0
+99POWER = GEN * ( -CURR )
+33GEN CURR POWER FLUX GEN_1 NRG
+C The following transport delay copies GEN, only delays the output by DELTAT
+C 78901234567890123456789012345678901234567890123456789012345678901234567890
+99GEN_1 53+GEN { Type-53 supplemental device with named delay} .001 DELTAT
+C Step Time GEN CURR POWER FLUX GEN_1
+C 0 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00
+C 1 1.00000E-04 3.76732E+02-1.04694E+00 3.94417E+02 1.88366E-02 0.00000E+00
+C 2 2.00000E-04 3.75929E+02-1.04552E+00 3.93040E+02 5.64697E-02 3.76732E+02
+C 3 3.00000E-04 3.74591E+02-1.08895E+00 4.07913E+02 9.39957E-02 3.75929E+02
+BLANK card ending all TACS data cards
+C 400 4.00000E-02 -3.04999E+02 1.07014E+00 3.26391E+02 5.68879E-01-2.96431E+02
+C 450 4.50000E-02 -1.16499E+02 2.76576E+00 3.22210E+02-9.69816E-01-1.29930E+02
+C 500 5.00000E-02 3.77000E+02-1.43750E+00 5.41938E+02-1.88500E-02 3.76732E+02
+C Row Name Minimum Maximum Time of min
+C 1 GEN -3.7700000000E+02 3.7700000000E+02 0.025000
+C 2 CURR -3.4999091625E+00 3.4999091625E+00 0.037500
+C 3 POWER -3.4019847371E+02 5.8499138215E+02 0.005200
+C 4 FLUX -1.0187551143E+00 9.8105511427E-01 0.012500
+C 5 GEN_1 -3.7700000000E+02 3.7697024536E+02 0.025100
+C 6 NRG 0.0000000000E+00 1.3570878894E+01 0.000000
+ PRINTER PLOT
+ 144 2. 0.0 20. POWER { Axis limits: (-3.402, 5.850)
+BLANK card ending plot cards
+BEGIN NEW DATA CASE
+BLANK
+
+
|