diff options
| author | Angelo Rossi <angelo.rossi.homelab@gmail.com> | 2023-06-21 12:04:16 +0000 |
|---|---|---|
| committer | Angelo Rossi <angelo.rossi.homelab@gmail.com> | 2023-06-21 12:04:16 +0000 |
| commit | b18347ffc9db9641e215995edea1c04c363b2bdf (patch) | |
| tree | f3908dc911399f1a21e17d950355ee56dc0919ee /benchmarks/dc45.dat | |
Initial commit.
Diffstat (limited to 'benchmarks/dc45.dat')
| -rw-r--r-- | benchmarks/dc45.dat | 288 |
1 files changed, 288 insertions, 0 deletions
diff --git a/benchmarks/dc45.dat b/benchmarks/dc45.dat new file mode 100644 index 0000000..d06f9be --- /dev/null +++ b/benchmarks/dc45.dat @@ -0,0 +1,288 @@ +BEGIN NEW DATA CASE
+C BENCHMARK DC-45
+C 1st half of split version of DC-33 . Rather than use TACS to integrate
+C flux during the simulation, that operation is now posponed until the post-
+C processing of compansion case DC-46. Connection is via LUNIT4 plot file.
+C Total of 4 subcases.
+C DISK PLOT DATA { Toggle the Apollo default of LUNIT4 = -4 to +4 (use disk)
+C $CLOSE, UNIT=4 STATUS=DELETE { Destroy empty date/time plot file of "SYSDEP"
+C $OPEN, UNIT=4 FILE=DC45TO46.pl4 ! { Expected to be C-like (for L4BYTE = 1 )
+PRINTED NUMBER WIDTH, 13, 2, { Request maximum precision (for 8 output columns)
+ .000050 .050
+ 1 1 1 1 1 -1 0 2
+ 5 5 20 20 100 100
+96 GEN 8888. 1.E-9 1
+ 1.0 -0.7
+ 2.0 0.9
+ 3.5 1.0
+ 9999.
+BLANK card ending branch cards
+BLANK card ending (here non-existent) switch cards
+14GEN 377. 60. -1.
+C --------------+------------------------------
+C From bus name | Names of all adjacent busses
+C --------------+------------------------------
+C GEN |TERRA *TERRA *
+C TERRA |GEN *GEN *
+C --------------+------------------------------
+BLANK card ending source cards
+C Total network loss P-loss by summing injections = 7.106450000000E-06
+C ---- Initial flux of coil " " to "GEN " = 1.00000000E-09
+C Inject: GEN 377. 377. .377E-16 2.6786345332877 .710645E-14
+C Inject: 0.0 0.0 -2.678634533288 -90.0000000 504.92260952473
+C Step Time GEN TERRA
+C GEN
+C 0 0.0 377. 0.0
+C 1 .5E-4 376.9330268 -.523564601
+C 2 .1E-3 376.7321312 -1.04694318
+C 3 .15E-3 376.3973844 -1.02374791
+C 4 .2E-3 375.9289054 -1.04551661
+C 5 .25E-3 375.3268607 -1.06725433
+C 10 .5E-3 370.3222935 -1.17520854
+ 1
+C 800 .04 -304.999407 1.070136441
+C 900 .045 -116.499407 2.765761443
+C 1000 .05 377. -1.4375
+C Variable maxima : 377. 3.499909256
+C Times of maxima : 0.0 .0125
+C Variable minima : -377. -3.49990923
+C Times of minima : .025 .0375
+ PRINTER PLOT
+ 194 4. 0.0 20. GEN { Axis limits: (-3.500, 3.500)
+BLANK card ending plot cards
+BEGIN NEW DATA CASE
+C 2nd of 4 subcases is unrelated to 1st (no hysteresis). But there is a
+C nonlinear inductor (Type-93, true-nonlinear element). This example
+C illustrates TACS control of the optional shunt current source that is
+C declared by the second data field (columns 21-26) of the TACS CONTROL
+C declaration. Since the controlling TACS signal is identically unity,
+C this injects an extra amp of current into node "TRAN" beginning on
+C the first time step. This would produce a discontinuity in the branch
+C current (GEN, TRAN) at time zero, were it not for exact cancellation
+C by a one-amp Type-11 current source that is connected to node "TRAN".
+C It will be noted that the current (GEN, TRAN) continues smoothly out
+C of the phasor solution. The current of the NL reactor (TRAN, TERRA)
+C shows a one-amp jump beginning on the first step, due to the internal,
+C TACS-controlled source (remember, the inductor current is continuous).
+PRINTED NUMBER WIDTH, 13, 2, { Request maximum precision (for 8 output columns)
+ .000200 .020
+ 1 1 1 1 1 -1 0 2
+ 5 5 10 10
+TACS HYBRID { We use TACS only to produce signal that controls shunt current
+99SHUNT = 1.0 { Unit current (dc source) is inserted in parallel with ZnO
+33SHUNT { Output only this one TACS variable that controls NL shunt current
+77SHUNT 1.0 { Initial condition required for smooth electrical step 1
+BLANK card ending all TACS data
+ GEN TRAN 2.0 1
+93TRAN 1.0 1.0 1
+ 0.0 0.0
+ 0.9 0.9
+ 2.0 1.1
+ 10. 1.2
+ 9999
+ TACS CONTROL SHUNT { Use 2nd of 3 names: for TACS-controled shunt current
+BLANK card ending branch cards
+BLANK card ending (here non-existent) switch cards
+14GEN 377. 60. -1.
+11TRAN -1 -1.0 { 1-amp external dc current cancels internal NL source
+BLANK card ending source cards
+C Total network loss P-loss by summing injections = 1.000018973436E+00
+C
+C GEN 377. 377. .00530514044263 1.000009486673 1.0000189734357
+C 0.0 0.0 -.9999954144499 -89.6960393 188.49913562381
+C
+C ---- Initial flux of coil "TRAN " to " " = 5.30514044E-03
+C
+C Step Time TRAN GEN TRAN GEN TACS
+C TERRA TRAN SHUNT
+C 0 0.0 376.9893897 377. .0053051404 .0053051404 1.0
+C 1 .2E-3 375.7677437 375.9289054 -.919419146 .0805808538 1.0
+ 1
+C 100 .02 114.1251632 116.4994069 .1871218422 1.187121842 1.0
+C Variable max : 376.9893897 377. .4424771753 1.442477175 1.0
+C Times of max : 0.0 0.0 .0042 .0042 0.0
+C Variable min : -376.817325 -376.880939 -2.44858983 -1.44858983 1.0
+C Times of min : .0084 .0084 .0124 .0124 0.0
+ PRINTER PLOT
+C -0.653 -0.353 -0.054 0.245 0.545 0.844 1.143 1.442
+C ------+---------+---------+---------+---------+---------+---------+---------+
+C BBBBBBBBBBBBBBBBBBBBBBBBBBBB*AA
+C BBBBB | AAAAAA
+C BBBBBBB | AAAAAAAA
+C BBBBB | AAAAA
+C BBBB | AAAA
+C BBBBBBBBBBBBBB AAAAAAAAAAAAAA
+C | BBB AAA
+C | BBBBBBBBBB AAAAAAAAA
+C BBBBBB AAAAAAA
+C BBBBB | AAAA
+C BBBBB | AAAAA
+C BBBBBBBB | AAAAAAAA
+C BB |AAAAAA
+ 194 4. 0.0 20. GEN TRAN TRAN { Axis limits: (-2.449, 1.442)
+ 144 4. 0.0 20. TRAN { Axis limits: (-3.768, 3.770)
+BLANK card ending plot cards
+BEGIN NEW DATA CASE
+C 3rd of 4 subcases is related to 2nd. There is the same nonlinear L(i)
+C inductor (Type-93, true-nonlinear element). This example illustrates
+C optional TACS control of the (i, PSI) characteristic by multiplicative
+C scaling. The TACS multiplier of "i" is declared by the third data
+C field (columns 27-32) of the "TACS CONTROL" card. For this example,
+C the TACS variable is FACTOR, which varies smoothly (via one half a
+C cosine cycle) from 2.0 to 1.0, thereby reducing the current that is
+C drawn by approximately a factor of two. The series resistor is small,
+C to it does not drop much voltage. As a result, the voltage, and hence
+C the peak flux of the inductor, are nearly constant. Only the current
+C increases by about a factor of two over the 10 msec "ramp" time. The
+C presence of resistance merely reduces this ideal result: the factor is
+C less than two --- maybe 1.5 or so.
+PRINTED NUMBER WIDTH, 13, 2, { Request maximum precision (for 8 output columns)
+ .000200 .030
+ 1 1 1 1 1 -1 0 2
+ 5 5 49 1 55 5
+TACS HYBRID { We use TACS only to produce signal that controls shunt current
+99FACTOR = 1.5 + COSINE + STEP { Scaling factor changes from 3 to 1 over 0-10ms
+14COSINE 0.5 50. { Smooth transition over 1st 10 msec } .010
+11STEP -0.5 50. { Hold COSINE value after 10 ms} .010
+33FACTORSTEP COSINE { Output only the 3 user-defined TACS variables
+77FACTOR 2.0 { Initial condition required for smooth electrical step 1
+BLANK card ending all TACS data
+ GEN TRAN 20. 1
+93TRAN 2.0 1.0 1
+ 0.0 0.0
+ 0.9 0.9
+ 2.0 1.1 { Execution does reach this 2nd seg of (i, PSI)
+ 9999
+ TACS CONTROL FACTOR { Use 3rd of 3 names: TACS-scaled curve (x,y)
+BLANK card ending branch cards
+BLANK card ending (here non-existent) switch cards
+14GEN 350. 50. -1.0
+BLANK card ending source cards
+C Total network loss P-loss by summing injections = 4.885536661314E+01
+C ---- Initial flux of coil "TRAN " to " " = 1.39586762E-01
+C GEN 350. 350. .27917352350367 2.2103250125975 48.855366613143
+C 0.0 0.0 -2.19262372629 -82.7439171 383.7091521007
+C
+C Step Time TRAN GEN TRAN GEN TACS
+C TERRA TRAN FACTOR
+C
+C 0 0.0 344.4165295 350. .2791735235 .2791735235 2.0
+C 1 .2E-3 340.9842812 349.3093549 .4162536857 .4162536857 1.999013364
+C 2 .4E-3 336.2117309 347.2401455 .5514207281 .5514207281 1.996057351
+C
+C 49 .0098 -347.838306 -349.309355 -.073552423 -.073552423 1.000986636
+C 50 .01 -347.141951 -350. -.14290245 -.14290245 1.0
+C 51 .0102 -345.0697 -349.309355 -.211982761 -.211982761 1.0
+ 1
+C 150 .03 -347.789928 -350. -.110503595 -.110503595 1.0
+C Variable maxima : 349.3458152 350. 3.110373844 3.110373844 2.0
+C Times of maxima : .0198 0.0 .0042 .0042 0.0
+C Variable minima : -348.491847 -350. -2.24512833 -2.24512833 1.0
+C Times of minima : .0298 .01 .0146 .0146 .01
+ PRINTER PLOT
+ 194 3. 0.0 30. GEN TRAN TACS FACTOR { Axis limits: (-2.245, 3.110)
+C CALCOMP PLOT { Repeat this same plot, only in high-resolution mode
+C 194 3. 0.0 30. GEN TRAN TACS FACTOR
+BLANK card ending plot cards
+BEGIN NEW DATA CASE
+C 4th of 4 subcases is related to 3rd. That nonlinear inductor L(i)
+C (Type-93, true-nonlinear element) has been made linear by reduction of
+C the flux-current characteristic to a single point. The result is a
+C TACS-controlled linear inductor L(t). Except that here dynamics are
+C involved (because L stores energy, and has history), this is the
+C inductive equivalent of commonly-used TACS-controlled resistance R(t).
+C Between time 0 and 100 msec, inductance is to be varied sinusoidally
+C between 125 mH and 500 mH. Disconnected branches BEGIN and END
+C correspond to these two limiting values, and they define assymptotes
+C of the transition between the two. The graph is smooth, and it shows
+C a smooth transition between the two steady-state assymptotes.
+PRINTED NUMBER WIDTH, 11, 2, { Request maximum precision (for 8 output columns)
+ .000400 .120
+ 1 1 1 1 1 -1
+ 5 5
+TACS HYBRID { We use TACS only to produce signal that controls shunt current
+99FACTOR = 2.5 + COSINE + STEP { Scale factor changes from 4 to 1 over 0-100 ms
+14COSINE 1.5 5.0 { Smooth transition over 1st 100 msec } .100
+11STEP -1.5 { Hold COSINE valu after 100 ms} .100
+33FACTORSTEP COSINE { Output only the 3 user-defined TACS variables
+77FACTOR 4.0 { Initial condition to make output signal smooth at t = 0
+77COSINE 1.5 { Initial condition to make output signal smooth at t = 0
+BLANK card ending all TACS data
+ GEN TRAN 35. { R of series R-L branch to ground } 1
+93TRAN 8.0 1.0 { i-steady and PSI-steady for phasors
+ 0.0 0.0 { Symmetric curve always begins at origin 0,0
+ 2.0 1.0 { Single (i, PSI) point defines L b4 FACTOR
+ 9999 { Terminate the characteristic after just the one point
+ TACS CONTROL FACTOR { Use 3rd of 3 names: TACS-scaled curve (x,y)
+C That is all we need for the TACS-controlled L of series R-L circuit. But
+C for a nice plot, we want assymptotic curves. The first in in the steady
+C state, corresponding to i-steady and PSI-steady of the Type-93 branch
+C card. This is L = PSI / i = 1.0 / 8.0 = 125 mH. Note that this matches
+C the initial signal. Initial FACTOR = 4.0 and the characteristic gives
+C L = PSI / i = 1.0 / 2.0 = 500 mH. Dividing by FACTOR gives 125 mH as the
+C initial inductance within the dT loop. So, show phasor flow:
+ GEN BEGIN 35. 125. { Branch flow is phasor solution
+C That was for the start. Next, we want the termination, which corresponds
+C to FACTOR = 1.0 so no scaling. I.e., L = 500 mH (the characteristic):
+ GEN END 35. 500. { Branch flo is assymptote for infinite t
+BLANK card ending branch cards
+C Switches are used only to measure the currents through the preceding two
+C branches. These are the two assymptotic signals of following plot:
+ BEGIN MEASURING 1
+ END MEASURING 1
+BLANK card ending switch cards
+C --------------+------------------------------
+C From bus name | Names of all adjacent busses.
+C --------------+------------------------------
+C GEN |TRAN *BEGIN *END *
+C TRAN |TERRA *GEN *
+C BEGIN |TERRA *GEN *
+C END |TERRA *GEN *
+C TERRA |TRAN *BEGIN *END *
+C --------------+------------------------------
+14GEN 420. 50. -1.0
+C TRAN 234.06699294777 313.5412844237 5.3123716300638 7.9842632447061 -.677791157E-13 -.677791157E-13
+C 208.61634607684 41.7095865 -5.960467030767 -48.2904135 1251.698076461 1251.6980765
+C
+C TERRA 0.0 0.0 -5.312371630064 7.9842632447061 0.0
+C 0.0 0.0 5.9604670307669 131.7095865 0.0
+C Total network loss P-loss by summing injections = 2.350389825256E+03
+C Output for steady-state phasor switch currents.
+C Node-K Node-M I-real I-imag I-magn Degrees Power Reactive
+C BEGIN 5.31237163E+00 -5.96046703E+00 7.98426324E+00 -48.2904 0.00000000E+00 0.00000000E+00
+C END 5.67589241E-01 -2.54733456E+00 2.60980285E+00 -77.4387 0.00000000E+00 0.00000000E+00
+BLANK card ending source cards
+ GEN TRAN { Output node voltages for the controlled branch L(t) only
+C First 2 output variables are electric-network voltage differences (upper voltage minus lower voltage);
+C Next 3 output variables are branch currents (flowing from the upper node to the lower node);
+C Next 3 output variables belong to TACS (with "TACS" an internally-added upper name of pair).
+C Step Time GEN TRAN BEGIN END GEN TACS TACS TACS
+C TERRA TERRA TRAN FACTOR STEP COSINE
+C *** Phasor I(0) = 5.3123716E+00 Switch "BEGIN " to " " closed in the steady-state.
+C *** Phasor I(0) = 5.6758924E-01 Switch "END " to " " closed in the steady-state.
+C 0 0.0 420. 234.06699 5.3123716 .56758924 5.3123716 4.0 0.0 1.5
+C 1 .4E-3 416.68817 206.10551 6.0166476 .88197067 6.0166476 3.9998816 0.0 1.4998816
+C 2 .8E-3 406.80493 174.8932 6.6262352 1.1824658 6.6260494 3.9995263 0.0 1.4995263
+C 3 .0012 390.50612 140.93094 7.1314997 1.464335 7.1307196 3.9989342 0.0 1.4989342
+BLANK card ending node voltage outputs
+C 290 .116 129.78714 208.41029 -4.028677 -2.244816 -2.246376 1.0 -1.5 0.0
+C 295 .118 339.78714 376.14579 .78854743 -1.037462 -1.038819 1.0 -1.5 0.0
+C 300 .12 420. 400.22543 5.3045736 .56616677 .5649877 1.0 -1.5 0.0
+C Variable maxima : 420. 409.93775 7.9767416 2.6063662 7.9698488 4.0 0.0 1.5
+C Times of maxima : 0.0 .0992 .0028 .0044 .0028 0.0 0.0 0.0
+C Variable minima : -420. -409.6697 -7.973184 -2.60532 -7.845698 1.0 -1.5 -1.499882
+C Times of minima : .01 .1092 .1128 .1144 .0128 0.1 0.1 .0996
+ CALCOMP PLOT
+C Orlando Hevia in Santa Fe, Argentina, supplied the following one-line
+C correction in E-mail dated 10 January 2007. He learned of the bad ATP data
+C during experimentation with the new GNU F95 compiler, which choked on this:
+C NOTE A MISTAKE IN DATA 120. IS ONE COLUMN TOO TO THE RIGHT
+C DATA FM1180 / '( I2, 2I1, E3.0, 2E4.0, E5.0, E4.0, 4A6, 2A16 )' /
+C -=---====----=====----
+C 19412. 0.0 120. BRANCH Vary linear L Inductor current
+ 19412. 0.0120. BRANCH Vary linear L Inductor current
+ BEGIN END GEN TRAN TACS FACTOR
+BLANK card ending plot cards
+BEGIN NEW DATA CASE
+BLANK
+
|