diff options
| author | Angelo Rossi <angelo.rossi.homelab@gmail.com> | 2023-06-21 12:04:16 +0000 |
|---|---|---|
| committer | Angelo Rossi <angelo.rossi.homelab@gmail.com> | 2023-06-21 12:04:16 +0000 |
| commit | b18347ffc9db9641e215995edea1c04c363b2bdf (patch) | |
| tree | f3908dc911399f1a21e17d950355ee56dc0919ee /benchmarks/dc29.dat | |
Initial commit.
Diffstat (limited to 'benchmarks/dc29.dat')
| -rw-r--r-- | benchmarks/dc29.dat | 276 |
1 files changed, 276 insertions, 0 deletions
diff --git a/benchmarks/dc29.dat b/benchmarks/dc29.dat new file mode 100644 index 0000000..7c8ab31 --- /dev/null +++ b/benchmarks/dc29.dat @@ -0,0 +1,276 @@ +BEGIN NEW DATA CASE
+C BENCHMARK DC-29
+C Test of "SEMLYEN SETUP" for 138-mile, single-circuit, 500-kV overhead
+C line that connects "John Day" with "Lower Monumental" (BPA substations).
+C There are 2 ground wires (both eliminated), and each phase consists of a
+C bundle of 2 conductors. Punched LUNIT7 branch cards contribute to DC-31.
+C 1st of 3 subcases. 2nd is for Pi-equiv. output (fast). 3rd is bypassed.
+C Solution changed on 23 Oct 1990 due to Mustafa Kizilcay's modifications
+C (preceding commented data has been copied to bottom for preservation).
+SEMLYEN SETUP
+$ERASE
+BRANCH JDA LMA JDB LMB JDC LMC
+TOLERANCES 10 5000. { Illustration only; value of FMED actually unchanged
+C 345678901234567890123456789012345678901234567890
+C 60 80 230 1 7 7777 0 { Semlyen miscellaneous data
+C 60 80 1 230 1 7 7777 0 { Semlyen miscellaneous data
+C Guido: whenever n4=0(col 26), n1 (col 21) should be 1 !! avoid kill=152
+ 200 150 10 230 1 7 7777 0 { Semlyen miscellaneous data
+C Guido: overhead lines; rule of thumb: NOO=100-300, NPOINT=150
+C Note: Guido modifies Semlyen misc. data card above on 23 Oct 1990 following
+C the addition of Mustafa Kizilcay's latest changes. The old one gave
+C an early KILL code. Later (November 7th), WSM and THL convert the
+C "1 " of columns 21-22 to "10" to make it universal. Although the
+C VAX had no trouble reading 10 from the original as I2 information,
+C Sun (which agreed with Apollo, so Apollo most likely also was wrong)
+C erroneously read unity! Sun seems to ignore blanks in "I" FORMATs.
+LINE CONSTANTS
+ 1.3636 .05215 4 1.602 -20.75 50. 50.
+ 1.3636 .05215 4 1.602 -19.25 50. 50.
+ 2.3636 .05215 4 1.602 - 0.75 77.5 77.5
+ 2.3636 .05215 4 1.602 0.75 77.5 77.5
+ 3.3636 .05215 4 1.602 19.25 50. 50.
+ 3.3636 .05215 4 1.602 20.75 50. 50.
+ 0.5 2.61 4 0.386 -12.9 98.5 98.5
+ 0.5 2.61 4 0.386 12.9 98.5 98.5
+BLANK card ending conductor cards within "LINE CONSTANTS" data
+C 27. 5000. 1 138. { Transient frequency
+C 27. 60.00 1 138. { Phasor solution frequency
+C 27. 6.00 1 138. 6 20 { log looping
+ 27. 5000. 138. { Transient frequency
+ 27. 60.00 138. { Phasor solution frequency
+ 27. 6.00 138. 6 20 { log looping
+BLANK card ending frequency cards of "LINE CONSTANTS" data
+C Frequency = 5.00000000E+03
+C --------------------------
+C Impedance matrix Admittance matrix
+C (ohm/mile) (mho/mile)
+C
+C 3.2463317E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00
+C 6.3079678E+01 5.2869139E-04 -8.2803449E-05 -6.2048083E-05
+C
+C 2.3065452E+00 2.0246396E+00 0.0000000E+00 0.0000000E+00
+C 1.4273670E+01 5.9110509E+01 5.3917160E-04 -8.2803449E-05
+C
+C 2.9595110E+00 2.3065452E+00 3.2463317E+00 0.0000000E+00
+C 1.4114577E+01 1.4273670E+01 6.3079678E+01 5.2869139E-04
+BLANK card ending "LINE CONSTANTS" data cases
+C The following values are computed on the basis of exact diagonalization of the
+C Mode to phase voltage Mode to phase current
+C transformation matrix transformation matrix
+C
+C 1.000000 -1.000000 -0.266985 0.420272 -0.500000 -0.299082
+C 0.000000 0.000000 0.019744 0.007566 0.000000 0.006219
+C
+C 0.711142 0.000000 1.000000 0.224711 0.000000 0.840545
+C -0.027600 0.000000 0.000000 -0.012556 0.000000 0.015131
+C
+C 1.000000 1.000000 -0.266985 0.420272 0.500000 -0.299082
+C 0.000000 0.000000 0.019744 0.007566 0.000000 0.006219
+C
+C Alpha Beta Attenuation
+C Mode (neper/mi) (radians/mi) (db/mi)
+C 1 0.8245225702687424E-02 0.1861008889722703E+00 0.7161712049448019E-01
+C 2 0.4981192766022477E-03 0.1700760589248700E+00 0.4326609063159914E-02
+C 3 0.4573686287515477E-03 0.1691150685564419E+00 0.3972653433249082E-02
+C Number of frequencies = 121 Starting and ending Hz = 6.0000E+00 6.000E+06
+C Fitting of the propagation step response for mode number 1 :
+C Iteration Amplitude X(1) X(2) X(3) Error
+C 1 7.26461134E-1 1.32035374E+1 1.17295449E+0 2.21313604E-2 7.35218983E-04
+C 1 7.13648369E-1 1.45238912E+1 1.17295449E+0 2.21313604E-2 1.23450128E-03
+C 1 7.02961062E-1 1.58442449E01 1.17295449E+0 2.21313604E-2 1.78841949E-03
+C < < Etc. until final (23-rd) such entries, which is:
+C 3 7.67204181E-1 1.05695813E+1 1.17465822E+0 2.53215686E-2 3.72675596E-05
+C Successful convergence .... SUBROUTINE TDFIT. Tolerance EPS = 5.00000000E-05
+C ++++ Warning! TDFIT can not adjust time-domain step response to fit exactly
+C Instead, the initial fitting will be used.
+C Amplitude 1 Time const. 1 Amplitude 2 Time const. 2 Delay time
+C 7.6720418E-01 7.0400012E-05 2.3279582E-01 6.3345970E-04 7.7782236E-04
+C Mode 1, time step = 3.72049322E-06 Symbols : "." = Semlyen approximation
+C Error Time 0.0 8.93193367E-01
+C .1........1........1........1........1........1..
+C 0.00000E+00 7.62701E-04 .*
+C 0.00000E+00 7.66422E-04 ..0
+C 0.00000E+00 7.70142E-04 ..0
+C 0.00000E+00 7.73863E-04 .. 0
+C 0.00000E+00 7.77583E-04 .. 0
+C -2.07761E-02 7.81304E-04 . . 0
+C -4.84345E-03 7.85024E-04 . *
+C 6.50870E-03 7.88745E-04 . 0.
+C 1.41364E-02 7.92465E-04 . 0.
+C 1.88276E-02 7.96186E-04 . 0.
+C 2.12721E-02 7.99906E-04 . 0 .
+C 2.20463E-02 8.03627E-04 . 0 .
+C 2.16177E-02 8.07347E-04 . 0 .
+C 2.03607E-02 8.11068E-04 . 0 .
+C 1.85647E-02 8.14788E-04 . 0 .
+C 1.64473E-02 8.18509E-04 . 0.
+C 1.41747E-02 8.22229E-04 . 0 .
+C 1.18700E-02 8.25949E-04 . 0. C 9.61526E-03 8.29670E-04 . 0.
+C 7.46654E-03 8.33390E-04 . 0.
+$PUNCH
+C -1JDA LMA 5.72862E-03 7.77822E-04 1 1 2 2 3
+C 1.76406006E+01 9.04231135E+01-1.97906661E-04 1.44978522E-03 6.00000000E+01
+C 0.00000E+00 1.42045E+04 7.67204E-01 0.00000E+00 1.57863E+03 2.32796E-01
+C 0.00000E+00 1.70053E+05-7.75536E-04 0.00000E+00 5.92740E+02-1.43454E-03
+C -1JDB LMB 7.00175E-03 7.40982E-04 2 2 2 2 3
+C 5.19844042E-01 4.16341654E+01-1.59314154E-05 1.96071950E-03 6.00000000E+01
+C 0.00000E+00 1.82512E+05 9.69335E-01 0.00000E+00 2.58428E+03 3.06652E-02
+C 0.00000E+00 9.60136E+03-1.29672E-04 0.00000E+00 5.91248E+01-4.28783E-04
+C -1JDC LMC 4.11495E-03 7.40975E-04 3 3 2 2 3
+C 2.42272029E+00 7.27673245E+01-1.71561794E-05 1.15316857E-03 6.00000000E+01
+C 0.00000E+00 4.30709E+05 9.63717E-01 0.00000E+00 1.32518E+03 3.62828E-02
+C 0.00000E+00 2.12922E+03-1.21998E-04 0.00000E+00 8.97571E+01-3.32339E-04
+C Prior to improvement on 27 November 2000, zero imaginary parts were
+C included, and this forced low precision of 6E12.5:
+C 1.00000E+00 0.00000E+00 1.00000E+00 0.00000E+00-2.66985E-01 0.00000E+00
+C 7.11142E-01 0.00000E+00-1.02636E-14 0.00000E+00 1.00000E+00 0.00000E+00
+C 1.00000E+00 0.00000E+00-1.00000E+00 0.00000E+00-2.66985E-01 0.00000E+00
+C 4.20272E-01 0.00000E+00 5.00000E-01 0.00000E+00-2.99082E-01 0.00000E+00
+C 2.24711E-01 0.00000E+00-5.36721E-15 0.00000E+00 8.40545E-01 0.00000E+00
+C 4.20272E-01 0.00000E+00-5.00000E-01 0.00000E+00-2.99082E-01 0.00000E+00
+C Beginning 27 November 2000, the zero imaginary parts are implied,
+C giving the following 3E26.18 output following a new request word. A
+C big paragraph about this is planned for the April, 2001, newsletter:
+C NO IMAGINARY PART
+C 1.0000000000000000E+00 1.0000000000000000E+00 -2.6698449851193501E-01
+C 7.1114175640039812E-01 -1.1764114701044076E-14 1.0000000000000000E+00
+C 9.9999999999999945E-01 -9.9999999999999467E-01 -2.6698449851194972E-01
+C 4.2027250134843613E-01 5.0000000000000333E-01 -2.9908213367540470E-01
+C 2.2471123211965521E-01 -6.1556662545037000E-15 8.4054500269687149E-01
+C 4.2027250134843563E-01 -4.9999999999999922E-01 -2.9908213367541620E-01
+BLANK card ending "SEMLYEN SETUP" data cases
+BEGIN NEW DATA CASE
+C BENCHMARK DC-29
+C 2nd of 3 subcases illustrates punching of Pi-equivalents on LUNIT8.
+C Feature added by Mustafa Kizilcay of University of Hannover, Oct 88.
+C There is no rational function fitting, so execution is fast. Also,
+C the time spent in LINE CONSTANTS is minimal: 2 decades, 1 pt/dec.
+C { Running interactively ("SPY DC29.") gave debug on second subcase:
+DIAGNOSTIC { Somehow needed to erase overlay-25 diagnostic. ???? 9 July 1989
+SEMLYEN SETUP
+$OPEN, UNIT=8 FILE=dc29out.lis STATUS=UNKNOWN FORM=FORMATTED ! { Pi-equivalents will go here
+C 345678901234567890123456789012345678901234567890
+ 60 80 230 3 1 7 4100 4100 { Semlyen miscellaneous data
+LINE CONSTANTS
+ 1.3636 .05215 4 1.602 -20.75 50. 50.
+ 1.3636 .05215 4 1.602 -19.25 50. 50.
+ 2.3636 .05215 4 1.602 - 0.75 77.5 77.5
+ 2.3636 .05215 4 1.602 0.75 77.5 77.5
+ 3.3636 .05215 4 1.602 19.25 50. 50.
+ 3.3636 .05215 4 1.602 20.75 50. 50.
+ 0.5 2.61 4 0.386 -12.9 98.5 98.5
+ 0.5 2.61 4 0.386 12.9 98.5 98.5
+BLANK card ending conductor cards within "LINE CONSTANTS" data
+ 27. 5000. 138. { Transient frequency
+ 27. 50.00 138. { Phasor solution frequency
+ 27. 6.00 138. 2 1 { log looping
+BLANK card ending frequency cards of "LINE CONSTANTS" data
+BLANK card ending "LINE CONSTANTS" data cases
+$CLOSE, UNIT=8 STATUS=KEEP { Disconnect file now containing Pi-equivalents
+BLANK card ending "SEMLYEN SETUP" data cases
+C Transfer [Y] of equivalent Pi for F = 5.0000E+01 Hz. 23-Oct-90 19.45.28
+C 1.151519555275E-3 -1.137441619542E-02 -1.060634758717E-04 3.491463556430E-03
+C 3.537076770591E-4 3.210624087768E-03 -1.060634758717E-04 3.491463556430E-03
+C 2.050900981651E-3 -1.162860843144E-02 -1.060634758717E-04 3.491463556430E-03
+C 3.537076770591E-4 3.210624087768E-03 -1.060634758717E-04 3.491463556430E-03
+C 1.151519555275E-3 -1.137441619542E-02
+C Shunt [Y] of equivalent Pi for F = 5.0000E+01 Hz.
+C -8.541869714622E-6 3.665747845891E-04 6.607667284137E-06 -5.660142619185E-05
+C -8.648581530269E-6 -4.295696271522E-05 6.607667284137E-06 -5.660142619185E-05
+C -2.342599469890E-5 3.722080025785E-04 6.607667284137E-06 -5.660142619185E-05
+C -8.648581530269E-6 -4.295696271522E-05 6.607667284137E-06 -5.660142619185E-05
+C -8.541869714623E-6 3.665747845891E-04
+C Transfer [Y] of equivalent Pi for F = 6.0000E+00 Hz. 23-Oct-90 19.45.28
+C 3.262709023195E-2 -7.809118174262E-02 -1.341276675346E-02 2.522775392732E-02
+C -1.150007192882E-2 2.343312809664E-02 -1.341276675346E-02 2.522775392732E-02
+C 3.436831351543E-2 -7.888248987903E-02 -1.341276675347E-02 2.522775392732E-02
+C -1.150007192882E-2 2.343312809664E-02 -1.341276675347E-02 2.522775392732E-02
+C 3.262709023195E-2 -7.809118174262E-02
+C Shunt [Y] of equivalent Pi for F = 6.0000E+00 Hz.
+C -3.427096070385E-8 4.377964661972E-05 2.594787689802E-08 -6.855484667815E-06
+C -3.570745329639E-8 -5.136885722574E-06 2.594787689802E-08 -6.855484667815E-06
+C -9.461439943596E-8 4.464722732424E-05 2.594787689809E-08 -6.855484667815E-06
+C -3.570745329639E-8 -5.136885722574E-06 2.594787689809E-08 -6.855484667815E-06
+C -3.427096070393E-8 4.377964661972E-05
+C Transfer [Y] of equivalent Pi for F = 6.0000E+01 Hz. 23-Oct-90 19.45.28
+C 9.441668531285E-4 -9.566451344743E-03 -7.083376044220E-05 2.864853469711E-03
+C 3.766916044259E-4 2.651337447173E-03 -7.083376044220E-05 2.864853469711E-03
+C 1.809395347023E-3 -9.800403930488E-03 -7.083376044219E-05 2.864853469711E-03
+C 3.766916044259E-4 2.651337447173E-03 -7.083376044219E-05 2.864853469711E-03
+C 9.441668531284E-4 -9.566451344743E-03
+C Shunt [Y] of equivalent Pi for F = 6.0000E+01 Hz.
+C -1.202671448681E-5 4.408181056666E-04 9.416194169739E-06 -6.772347154278E-05
+C -1.218469464166E-5 -5.164200772177E-05 9.416194169739E-06 -6.772347154278E-05
+C -3.311677630903E-5 4.467905957272E-04 9.416194169739E-06 -6.772347154278E-05
+C -1.218469464166E-5 -5.164200772177E-05 9.416194169739E-06 -6.772347154278E-05
+C -1.202671448681E-5 4.408181056666E-04
+C Transfer [Y] of equivalent Pi for F = 6.0000E+02 Hz. 23-Oct-90 19.45.28
+C -3.712845487162E-3 -5.603787237254E-03 -1.561079196979E-03 4.482090715102E-03
+C -3.184914860379E-3 5.584231439014E-03 -1.561079196979E-03 4.482090715102E-03
+C -4.822417739649E-4 -7.822757815584E-03 -1.561079196979E-03 4.482090715102E-03
+C -3.184914860379E-3 5.584231439014E-03 -1.561079196979E-03 4.482090715102E-03
+C -3.712845487162E-3 -5.603787237254E-03
+C Shunt [Y] of equivalent Pi for F = 6.0000E+02 Hz.
+C 7.516929477229E-3 1.093259393216E-02 3.157367799464E-03 -8.756571161718E-03
+C 6.427094062687E-3 -1.089709886987E-02 3.157367799464E-03 -8.756571161718E-03
+C 1.100477005468E-3 1.520008342172E-02 3.157367799464E-03 -8.756571161718E-03
+C 6.427094062687E-3 -1.089709886987E-02 3.157367799464E-03 -8.756571161718E-03
+C 7.516929477229E-3 1.093259393216E-02
+BEGIN NEW DATA CASE
+C 3rd of 3 subcases illustrates SEMLYEN SETUP for two of the actual
+C 3 phases of the 500-kV line data of the 1st subcase. Results will
+C be used in the 4th subcase of DC-41 to illustrate selective branch
+C current output. This addition is made 11 December 2000.
+SEMLYEN SETUP
+$ERASE
+BRANCH JDA LMA JDB LMB { Note only 2 of the actual 3 phases are used
+TOLERANCES 10 5000. { Illustration only; value of FMED actually unchanged
+ 200 150 10 230 1 7 7777 0 { Semlyen miscellaneous data
+LINE CONSTANTS
+ 1.3636 .05215 4 1.602 -20.75 50. 50.
+ 1.3636 .05215 4 1.602 -19.25 50. 50.
+ 2.3636 .05215 4 1.602 - 0.75 77.5 77.5
+ 2.3636 .05215 4 1.602 0.75 77.5 77.5
+C Following two conductor cards for phase "c" are omitted to create 2-phase line
+C 3.3636 .05215 4 1.602 19.25 50. 50. ---- omit phase "c"
+C 3.3636 .05215 4 1.602 20.75 50. 50. ---- omit phase "c"
+ 0.5 2.61 4 0.386 -12.9 98.5 98.5
+ 0.5 2.61 4 0.386 12.9 98.5 98.5
+BLANK card ending conductor cards within "LINE CONSTANTS" data
+ 27. 5000. 138. { Transient frequency
+ 27. 60.00 138. { Phasor solution frequency
+ 27. 6.00 138. 6 20 { log looping
+BLANK card ending frequency cards of "LINE CONSTANTS" data
+BLANK card ending "LINE CONSTANTS" data cases
+$PUNCH
+BLANK card ending "SEMLYEN SETUP" data cases
+BLANK { Note this extra blank will terminate execution, to avoid 3rd subcase
+BLANK { 14 Dec 94, we add more, to make 5 even when comments are destroyed
+BLANK { 14 Dec 94, we add more, to make 5 even when comments are destroyed
+BLANK { 14 Dec 94, we add more, to make 5 even when comments are destroyed
+BLANK { 14 Dec 94, we add more, to make 5 even when comments are destroyed
+BLANK { 14 Dec 94, we add more, to make 5 even when comments are destroyed
+BEGIN NEW DATA CASE
+C 4th of 4 subcases, not normally executed, is Rule Book example of XXII-D.
+C This was 3rd of 3 until 11 December 2000 when preceding subcase was added
+SEMLYEN SETUP
+$ERASE
+BRANCH SORCA LINEA SORCB LINEB SORCC LINEC
+ 60 80 2 1 7 7777 1637
+LINE CONSTANTS
+ 1.3159 .192 4 .858 -10.67 31.5 31.5
+ 2.3159 .192 4 .858 0.00 31.5 31.5
+ 3.3159 .192 4 .858 10.67 31.5 31.5
+ 0.5 9.48 4 0.313 -5.33 40.5 40.5
+ 0.5 9.48 4 0.313 5.33 40.5 40.5
+BLANK card ending conductor cards within "LINE CONSTANTS" data
+ 1000. 5000. 18.65 { Transient frequency
+ 1000. 60.00 18.65 { Phasor solution frequency
+ 1000. 60.00 18.65 4 21 { log looping
+BLANK card ending frequency cards of "LINE CONSTANTS" data
+BLANK card ending "LINE CONSTANTS" data cases
+$PUNCH
+BLANK card ending "SEMLYEN SETUP" data cases
+BEGIN NEW DATA CASE
+BLANK
|