diff options
| author | Angelo Rossi <angelo.rossi.homelab@gmail.com> | 2023-06-21 12:04:16 +0000 |
|---|---|---|
| committer | Angelo Rossi <angelo.rossi.homelab@gmail.com> | 2023-06-21 12:04:16 +0000 |
| commit | b18347ffc9db9641e215995edea1c04c363b2bdf (patch) | |
| tree | f3908dc911399f1a21e17d950355ee56dc0919ee /benchmarks/dc17.dat | |
Initial commit.
Diffstat (limited to 'benchmarks/dc17.dat')
| -rw-r--r-- | benchmarks/dc17.dat | 101 |
1 files changed, 101 insertions, 0 deletions
diff --git a/benchmarks/dc17.dat b/benchmarks/dc17.dat new file mode 100644 index 0000000..3fb6e53 --- /dev/null +++ b/benchmarks/dc17.dat @@ -0,0 +1,101 @@ +BEGIN NEW DATA CASE
+C BENCHMARK DC-17
+C Problem identical to DC-4, only here the data is modularized to two
+C levels using $INCLUDE with arguments (both numeric and alphanumeric).
+C March of 2006, modify to illustrate $INSERT with arguments and "/"-card
+C sorting. In addition to the original data case, 4 more will be appended
+C and each of these will have its own $INSERT disk file. As for the
+C original first, it remains the same except that $INSERT has replaced
+C the $INCLUDE use of years past. Arguments are unchanged, however.
+C 4 May 2007, add following $PREFIX after modification of OVER1 and
+C CIMAGE that moves CHAR*80 PREFIX into BLKCOM for use by $INSERT.
+C This allows remote execution, from \UNFORM, without data modification.
+$PREFIX, [] { $INCLUDE files are located in same place as this main data file
+$INSERT, dc17ins.dat, 9, .005, TRAN##,
+ .005 4.0
+ 1 1 1 1 1 -1
+ 5 5 20 20
+ TRAN LOADG 255. 5.E4 3
+ LOADG 1.E-6
+BLANK card ending BRANCH cards
+BLANK card ending SWITCH cards (none exists, for this case)
+BLANK card ending SOURCE cards
+ GEN TRAN
+BLANK card ending OUTPUT variable requests
+BLANK card ending PLOT cards
+BEGIN NEW DATA CASE
+C 2nd of 5 subcases of DC-17 that illustrate $INSERT use.
+C DC-26, 5th of 5 data subcases, modified. This is former DC17A.DAT
+$INSERT, DC17AINS.DAT, { Move all data except misc. data into this file
+ .000200 .000 60. { T-max = 0 means that no transient solution follows
+ 1 1 1 0 1
+BLANK card ending branch cards.
+BLANK card ending switch cards.
+BLANK card terminating EMTP source cards.
+BLANK card ending requests for output variables
+BLANK card ending plot cards
+BEGIN NEW DATA CASE
+C 3rd of 5 subcases of DC-17 that illustrate $INSERT use.
+C BENCHMARK DC-33, modified. This is former DC17B.DAT
+$INSERT, DC17BINS.DAT, { All data except misc. data has been moved to here
+ .000050 .020
+ 1 1 1 1 1 -1
+ 5 5 20 20
+BLANK card terminates all TACS data
+BLANK card ending all BRANCH cards
+BLANK card ending all SWITCH cards
+BLANK terminates the last SOURCE card
+C Total network loss P-loss by summing injections = 7.106450000000E-06
+C Inject: GEN 377. 377. .377E-7 2.6786345332877
+C Inject: 0.0 0.0 -2.678634533288 -89.9999992
+C ---- Initial flux of coil "GROUND" to "GEN " = 1.00000000E-09
+C
+C Step Time GEN GROUND GROUND TACS TACS
+C TERRA GEN FLUX GEN
+C *** Phasor I(0) = 0.3770000E-07 Switch "GROUND" to " " closed
+C 0 0.0 377. .377E-7 0.0 0.0 0.0
+C 1 .5E-4 376.9330268 .5235646391 -.523564601 .0094233257 376.9330268
+C 2 .1E-3 376.7321312 1.04694322 -1.04694318 .0282649546 376.7321312
+BLANK card ends OUTPUT variable requests
+BLANK card ending all batch-mode PLOT cards
+BEGIN NEW DATA CASE
+C 4th of 5 subcases of DC-17 that illustrate $INSERT use.
+C BENCHMARK DC-33, 2nd of 3 subcases, modified. This is former DC17C.DAT
+$INSERT, DC17CINS.DAT, { All data except misc. data has been moved to here
+ .000050 .020
+ 1 1 1 1 1 -1
+ 5 5 20 20
+BLANK card terminates all MODELS data { 9 July 1995, MODELS replaces old
+BLANK card ending all BRANCH cards
+BLANK card ending all SWITCH cards
+BLANK terminates the last SOURCE card
+C Total network loss P-loss by summing injections = 7.106450000000E-06
+BLANK card ends OUTPUT variable requests
+BLANK card ending all batch-mode PLOT cards
+BEGIN NEW DATA CASE
+C 5th of 5 subcases of DC-17 that illustrate $INSERT use.
+C DC-30, 6th of 6 subcases, modified. This is former DC17D.DAT
+$INSERT, DC17DINS.DAT,
+ 1.E-6 5.E-6 { Only take 5 steps; these are plenty for illustration
+ 1 -1
+BLANK card terminates all TACS data
+BLANK card ends all MODELS data
+ENDMODELS
+BLANK card ending all BRANCH cards
+BLANK card ending all SWITCH cards
+BLANK terminates the last SOURCE card
+BLANK card ends OUTPUT variable requests
+BLANK card ending all batch-mode PLOT cards
+C Comment about 6 lines above. Note ENDMODELS has like the initiation
+C word MODELS: there is only one of them, and has nothing to do with
+C the actual modeling. It is part of the structure in which actual data
+C is carried. Normally, ENDMODELS would precede the blank card ending
+C MODELS, but with sorting that is not possible. /-card sorting will
+C put the actual data there. If we raise ENDMODELS line by one row,
+C it would precede all real MODELS data, and that would be completely
+C wrong. So, we put it after the blank. Recall MODELS ignores blank
+C lines, so the blank card ending MODELS is ignored. It is essential
+C to the sorting, but then is ignored by MODELS itself. Since it was
+C optional, anyway, this works well.
+BEGIN NEW DATA CASE
+BLANK
|