diff options
| author | Angelo Rossi <angelo.rossi.homelab@gmail.com> | 2023-06-21 12:04:16 +0000 |
|---|---|---|
| committer | Angelo Rossi <angelo.rossi.homelab@gmail.com> | 2023-06-21 12:04:16 +0000 |
| commit | b18347ffc9db9641e215995edea1c04c363b2bdf (patch) | |
| tree | f3908dc911399f1a21e17d950355ee56dc0919ee /benchmarks/dc15.dat | |
Initial commit.
Diffstat (limited to 'benchmarks/dc15.dat')
| -rw-r--r-- | benchmarks/dc15.dat | 90 |
1 files changed, 90 insertions, 0 deletions
diff --git a/benchmarks/dc15.dat b/benchmarks/dc15.dat new file mode 100644 index 0000000..9d7703d --- /dev/null +++ b/benchmarks/dc15.dat @@ -0,0 +1,90 @@ +BEGIN NEW DATA CASE
+C BENCHMARK DC-15
+C Derive [R], [L] representations of 2- or 3-winding transformers.
+XFORMER
+$ERASE { Erase any remnant card images that might exist in punch buffer
+22. 700.
+139.4 13.6 2100. 12. 700.
+$PUNCH { Flush contents of punch buffer (LUNIT7 punched output of preceding)
+C 2nd punch : 52, , , , , -0.2028822586562E-02 , 0.1353359666262E+03 $
+C Frequency was added explicitly on 18 July 2002. Prior to this date, it
+C merely was implied. But now it will be declared on a new $UNITS card
+C is to precede punched cards. However, there is ambiguity. Since the user
+C does not declare frequency as part of XFORMER data, for freq. of X the
+C $UNITS card will display STATFR --- the power frequency from STARTUP.
+C That is if data is old. But a user can define his own frequency F as he
+C goes using $DEPOSIT as follows (switch to a power frequency of 400 Hz):
+$DEPOSIT, STATFR=400. { SPY DEPOSIT command puts valu 400 in ATP variable STATFR
+22. 600.
+139.4 13.6 1800. 12. 600.
+$PUNCH
+C 1st punch : 51, , , , , 0.2426133676335E-01 , 0.1620334065762E+04 , ,,,,
+$DEPOSIT, STATFR=60. { Return to a more common power frequency (cancel the 400)
+22. 280.
+139.4 13.2 840. 13. 280.
+$PUNCH
+C 3rd punch : 0.4661083093112E-03 , 0.3113449149085E+02 , ,,,,
+22. 305.
+139.4 13.2 915. 13. 305.
+$PUNCH
+C 1st punch : 51, , , , , 0.4772244898150E-01 , 0.3187701553139E+04 , ,,,,
+22. 400.
+139.4 13.2 1200. 13. 400.
+$PUNCH
+C 2nd punch : 52, , , , , -0.3445670365668E-02 , 0.2298606303275E+03 $
+BRANCH NAME1 NAME2 NAME3 NAME4 NAME5 NAME6 { 3 pairs of names for phases
+3.3 83.3
+132.8 250. 6.7 83.3
+66.4 56.8 5.1 18.96
+13.2 56.8 3.2 18.96
+$PUNCH
+C 4th punch: 53,NAME5 ,NAME6 , , , -0.5802607141885E-01 , 0.7013580357111E+04 $
+C 5th punch: -0.2901590479727E-01 , 0.3507083721397E+04 $
+C 6th punch: 0.1153587338779E-01 , 0.6973923571743E+03 , ,,,,
+3.3 80.
+177. 400. 3.37 80.
+132.8 22. 3.57 7.35
+13.2 22. 3.42 7.35
+$PUNCH
+C Last LUNIT7: 0.3031150665151E-01 , 0.7263587283765E+03 , ,,,,
+BLANK carding ending "XFORMER" cases.
+BEGIN NEW DATA CASE
+C 2nd of 3 data subcases tests Gabor Furst's supporting routine that
+C will punch data cards to represent a Type-3 U.M. (induction motor).
+C This was added 4 February 1997 as described in April, 97, newsletter.
+INDUCTION MOTOR DATA
+ SINGLE { 1st of 2 for default motor parameters must be nonblank, so key 1st 8
+BLANK { 2nd of 2 for default motor parameters
+BLANK carding ending data subcases within SUBROUTINE INDUCT by Gabor Furst
+BEGIN NEW DATA CASE
+C 3rd of 3 data subcases tests Orlando Hevia's supporting routine that
+C calculates Type-14 harmonic sources for an HFS frequency scan. This
+C is added 16 December 2001 as should be documented in a newsletter.
+C Orlando Hevia's subroutine has been renamed HSOURC ("harmonic source").
+C ITYPE : 1- 2 RESERVED
+C BUS : 3- 8 BUS NAME
+C VOLT : 9-16 VOLTAGE OF BRIDGE IN VOLT
+C FREQ : 17-24 FREQUENCY IN HZ
+C AMPER : 25-32 CURRENT IN AMPER
+C PHASE : 33-40 PHASE IN DEGREES
+C SCCMVA : 41-48 SHORT-CIRCUIT POWER IN MVA
+C PERCEN : 49-56 PERCENT OF LOAD
+C ALFA : 57-64 DELAY ANGLE IN DEGREES
+C MU : 65-72 OVERLAP ANGLE IN DEGREES
+C NPU : 73-75 NUMBER OF PULSES
+C IMF : 76-78 MAXIMUM HARMONIC TO CALCULATE
+C KY : 79-80 RESERVED
+C BUS VOLT FREQ AMPER PHASE SCCMVA PERCEN ALFA MU NPUIMFKY
+C
+$ERASE { Erase any remnant card images that might exist in punch buffer
+CREATE HARMONIC SOURCES { Request transfer to Orlando Hevia's SUBROUTINE HSOURC
+C ------________--------________--------________--------________--------___---__
+ BUS6 600.0 50.0 1000.0 0.0 75.0 0.0 0.0 6 55
+$PUNCH { Flush the Type-14 source cards, which are output of the computation
+ BUS12 600.0 50.0 1000.0 0.0 75.0 0.0 0.0 12 55
+$PUNCH { Flush the Type-14 source cards, which are output of the computation
+ BUS18 600.0 50.0 1000.0 0.0 75.0 0.0 0.0 18 55
+$PUNCH { Flush the Type-14 source cards, which are output of the computation
+BLANK card ending requests of CHS
+BEGIN NEW DATA CASE
+BLANK
|