BEGIN NEW DATA CASE
C     BENCHMARK DCPR-7
C      Test of 3-phase Pi-circuit that is excited by 3 in-phase sources that are
C      present during the phasor solution.  No transients (phasor continuation).
DIAGNOSTIC           0 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9
PRINTED NUMBER WIDTH, 13, 2,  { Request maximum precision (for 8 output columns)
     .05     1.0     60.     60.
       1       1       1       1       1      -1
       2      -1                      { Turn off the diagnostic on step number 2
  RECA                      .001      { Short the receiving end through  R=1.E-3
  RECB                      .001      { ohm resistors,  so  that lots of current
  RECC                      .001      { will flow (no subtle effects here!).
 1SENDA RECA                 1.0   1.0  1.E4    { 1st card of 3-phase Pi-circuit
 2SENDB RECB                 0.7   0.3 -2.E3   1.0   1.0  1.E4
 3SENDC RECC                 0.7   0.3 -2.E3   0.7   0.3 -2.E3   1.0   1.0  1.E4
BLANK card ending branch cards
  GENA  SENDA       -1.0       9.0        { 1st of 3 permanently-closed switches
  GENB  SENDB       -1.0       9.0
  GENC  SENDC       -1.0       9.0
BLANK card ending switch cards
14GENA          100.       1.0    { Note all 3 sources}            -1.
14GENB          100.       1.0    { have a phase angle}            -1.
14GENC          100.       1.0    { of  zero  degrees.}            -1.
BLANK card ending source cards
C       Total network loss  P-loss  by summing injections =   6.246626371768E+03
C                                Output for steady-state phasor switch currents.
C         Node-K    Node-M            I-real            I-imag            I-magn
C         GENA      SENDA     0.41644176E+02   -0.45752035E+00    0.41646689E+02
C         GENB      SENDB     0.41644176E+02   -0.45752035E+00    0.41646689E+02
C         GENC      SENDC     0.41644176E+02   -0.45752035E+00    0.41646689E+02
C Last inject:   GENC
C Last inject:   SENDC     100.       100.      41.644175811789  41.646688990975
C Last inject:             0.0         0.0      -.4575203468966       -0.6294501
C  Step    Time        RECC         RECB         RECA         SENDC        SENDB
C
C                      GENC
C ***      Phasor I(0) =  0.4164418E+02   Switch  "GENA  "  to  "SENDA "  closed
C ***      Phasor I(0) =  0.4164418E+02   Switch  "GENB  "  to  "SENDB "  closed
C ***      Phasor I(0) =  0.4164418E+02   Switch  "GENC  "  to  "SENDC "  closed
C    0     0.0   .0416441758  .0416441758  .0416441758         100.         100.
C                       100.
C    1     .05   .0397499231  .0397499231  .0397499231  95.10565163  95.10565163
C                95.10565163
 1
C   20     1.0   .0416440951  .0416440951  .0416440951         100.         100.
C                       100.
C Variable max : .0416441758  .0416441758  .0416441758         100.         100.
C                       100.
C Times of max :         0.0          0.0          0.0          0.0          0.0
C                        0.0
C Variable min : -.041644069  -.041644069  -.041644069        -100.        -100.
C                      -100.
C Times of min :         0.5          0.5          0.5          0.5          0.5
C                        0.5
  PRINTER PLOT                                  { Axis limits : (-4.164,  4.164)
 143 .1 0.0 1.0         RECA   { This receiving end voltage is nice & sinusoidal
BLANK card ending plot cards
BEGIN NEW DATA CASE
BLANK