BEGIN NEW DATA CASE
C     BENCHMARK DC-49
C     Companion case to DC-32, which had  MEMSAV=1  use.   Development was first
C     documented  in  Volume X  EMTP Memoranda,  3 July 1980,  Pagination  MSDO.
C     Node  LOADA  has a one-ohm resistor connected to  FAULT,  and this in turn
C     is connected to ground via switch number one.  This fault switch was  open
C     during  DC-32,  but will here be closed at  12 msec  (the  1st step beyond
C     the backed-off switching time of  11.99 msec).
C $OPEN,  UNIT=22  FILE=dc32to49.bin  STATUS=OLD  FORM=UNFORMATTED ! { (hold case)
$OPEN,  UNIT=LUNIT2  FILE=dc32.bin  STATUS=OLD  FORM=UNFORMATTED ! { (hold case)
START AGAIN
       1         .011990
    9999
$CLOSE,  UNIT=LUNIT2   STATUS=KEEP
$OPEN,  UNIT=LUNIT2  STATUS=SCRATCH  FORM=UNFORMATTED
MISCELLANEOUS DATA CARDS
 .000020    .018                                    .010
       1       1       0       0       1       0       0       2
$OPEN, UNIT=LUNIT4  FILE=dc32.pl4   STATUS=APPEND !  { C-like usage adds at end 
C       The following step numbers are a continuation of DC-32,  which simulated
C       500 steps (DELTAT = 20 microseconds, TMAX = 10 milliseconds).
CHANGE PRINTOUT FREQUENCY
     500       1     502       2     510      10     550      50
TIME STEP LOOP
  PRINTER PLOT
 144 1. 10. 18.         LOADA LOADB              { Axis limits: (-2.784,  1.443)
BLANK card ending plot cards
BEGIN NEW DATA CASE
BLANK