From b18347ffc9db9641e215995edea1c04c363b2bdf Mon Sep 17 00:00:00 2001 From: Angelo Rossi Date: Wed, 21 Jun 2023 12:04:16 +0000 Subject: Initial commit. --- benchmarks/dcp7.dat | 59 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) create mode 100644 benchmarks/dcp7.dat (limited to 'benchmarks/dcp7.dat') diff --git a/benchmarks/dcp7.dat b/benchmarks/dcp7.dat new file mode 100644 index 0000000..1100d91 --- /dev/null +++ b/benchmarks/dcp7.dat @@ -0,0 +1,59 @@ +BEGIN NEW DATA CASE +C BENCHMARK DCPR-7 +C Test of 3-phase Pi-circuit that is excited by 3 in-phase sources that are +C present during the phasor solution. No transients (phasor continuation). +DIAGNOSTIC 0 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 +PRINTED NUMBER WIDTH, 13, 2, { Request maximum precision (for 8 output columns) + .05 1.0 60. 60. + 1 1 1 1 1 -1 + 2 -1 { Turn off the diagnostic on step number 2 + RECA .001 { Short the receiving end through R=1.E-3 + RECB .001 { ohm resistors, so that lots of current + RECC .001 { will flow (no subtle effects here!). + 1SENDA RECA 1.0 1.0 1.E4 { 1st card of 3-phase Pi-circuit + 2SENDB RECB 0.7 0.3 -2.E3 1.0 1.0 1.E4 + 3SENDC RECC 0.7 0.3 -2.E3 0.7 0.3 -2.E3 1.0 1.0 1.E4 +BLANK card ending branch cards + GENA SENDA -1.0 9.0 { 1st of 3 permanently-closed switches + GENB SENDB -1.0 9.0 + GENC SENDC -1.0 9.0 +BLANK card ending switch cards +14GENA 100. 1.0 { Note all 3 sources} -1. +14GENB 100. 1.0 { have a phase angle} -1. +14GENC 100. 1.0 { of zero degrees.} -1. +BLANK card ending source cards +C Total network loss P-loss by summing injections = 6.246626371768E+03 +C Output for steady-state phasor switch currents. +C Node-K Node-M I-real I-imag I-magn +C GENA SENDA 0.41644176E+02 -0.45752035E+00 0.41646689E+02 +C GENB SENDB 0.41644176E+02 -0.45752035E+00 0.41646689E+02 +C GENC SENDC 0.41644176E+02 -0.45752035E+00 0.41646689E+02 +C Last inject: GENC +C Last inject: SENDC 100. 100. 41.644175811789 41.646688990975 +C Last inject: 0.0 0.0 -.4575203468966 -0.6294501 +C Step Time RECC RECB RECA SENDC SENDB +C +C GENC +C *** Phasor I(0) = 0.4164418E+02 Switch "GENA " to "SENDA " closed +C *** Phasor I(0) = 0.4164418E+02 Switch "GENB " to "SENDB " closed +C *** Phasor I(0) = 0.4164418E+02 Switch "GENC " to "SENDC " closed +C 0 0.0 .0416441758 .0416441758 .0416441758 100. 100. +C 100. +C 1 .05 .0397499231 .0397499231 .0397499231 95.10565163 95.10565163 +C 95.10565163 + 1 +C 20 1.0 .0416440951 .0416440951 .0416440951 100. 100. +C 100. +C Variable max : .0416441758 .0416441758 .0416441758 100. 100. +C 100. +C Times of max : 0.0 0.0 0.0 0.0 0.0 +C 0.0 +C Variable min : -.041644069 -.041644069 -.041644069 -100. -100. +C -100. +C Times of min : 0.5 0.5 0.5 0.5 0.5 +C 0.5 + PRINTER PLOT { Axis limits : (-4.164, 4.164) + 143 .1 0.0 1.0 RECA { This receiving end voltage is nice & sinusoidal +BLANK card ending plot cards +BEGIN NEW DATA CASE +BLANK -- cgit v1.2.3