From b18347ffc9db9641e215995edea1c04c363b2bdf Mon Sep 17 00:00:00 2001 From: Angelo Rossi Date: Wed, 21 Jun 2023 12:04:16 +0000 Subject: Initial commit. --- benchmarks/dcp3.dat | 69 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 69 insertions(+) create mode 100644 benchmarks/dcp3.dat (limited to 'benchmarks/dcp3.dat') diff --git a/benchmarks/dcp3.dat b/benchmarks/dcp3.dat new file mode 100644 index 0000000..e9d2be4 --- /dev/null +++ b/benchmarks/dcp3.dat @@ -0,0 +1,69 @@ +BEGIN NEW DATA CASE +C BENCHMARK DCPR-3 +C Same as preceding case, except for removal of the permanently closed switch +POWER FREQUENCY, 1.0 +PRINTED NUMBER WIDTH, 13, 2, { Request maximum precision (for 8 output columns) +DIAGNOSTIC 0 9 9 9 9 9 0 9 9 9 9 9 9 9 9 9 9 9 9 + .005 1.0 1.0 1.0 + 1 1 1 1 1 -1 + 2 -1 5 5 20 20 + REC .001 { Near short at receiving end, to ground + 1SEND REC 1.0 1.0 1.E4 + GEN SEND 1.0 +BLANK card ending branch cards +BLANK card ending non-existent switch cards +14GEN 100. 1.0 -1. +BLANK card ending source cards +C Total network loss P-loss by summing injections = 1.993421807364E+03 +C GEN 100. 100. 39.86843614728 44.524811215286 +C 0.0 0.0 -19.82338550619 -26.4374857 +C Step Time REC SEND GEN +C 0 0.0 .0399674525 60.13156385 100. +C 1 .005 .0405797999 59.47927495 99.95065604 +C 2 .01 .0411521061 58.76828192 99.80267284 + 1 +C 200 1.0 .0399661325 60.13289683 100. +C Variable maxima : .044747265 63.31584536 100. +C Times of maxima : .075 .95 0.0 +C Variable minima : -.044746753 -63.3158499 -100. +C Times of minima : .575 .45 0.5 + PRINTER PLOT { Plot limits: (-4.475, 4.475) + 143 .1 0.0 1.0 REC { Plot card should show nice sinusoidal curve +BLANK card ending plot cards +BEGIN NEW DATA CASE +C 2nd of 2 subcases uses $UNITS and $VINTAGE on same problem (same answers) +POWER FREQUENCY, 1.0 +DIAGNOSTIC 0 9 9 9 9 9 0 9 9 9 0 0 0 0 0 0 0 0 0 +PRINTED NUMBER WIDTH, 13, 2, { Request maximum precision (for 8 output columns) + .005 1.0 1.0 1.0 { Note that we start with XOPT = COPT = 1 + 1 1 1 1 1 -1 + 2 1 5 5 20 20 + REC .001 { Near short at receiving end, to ground +$UNITS, 0.0, 0.0, { The 1-phase Pi-circuit to follow has millihenries, micromhos +$VINTAGE, 1, { Switch from narrow data formats (default choice) to wide formats + 1SEND REC 1.0 159.154943092 1591.54943092 +$VINTAGE, 0, +$UNITS, 1.0, 1.0, + GEN SEND 1.0 +BLANK card ending branch cards +BLANK card ending non-existent switch cards +14GEN 100. 1.0 -1. +BLANK card ending source cards +C Total network loss P-loss by summing injections = 1.993421807363E+03 +C GEN 100. 100. 39.868436147269 44.52481121528 +C 0.0 0.0 -19.8233855062 -26.4374857 +C Step Time REC SEND GEN +C 0 0.0 .0399674525 60.13156385 100. +C 1 .005 .0405797999 59.47927495 99.95065604 +C 2 .01 .0411521061 58.76828192 99.80267284 + 1 +C 200 1.0 .0399661325 60.13289683 100. +C Variable maxima : .044747265 63.31584536 100. +C Times of maxima : .075 .95 0.0 +C Variable minima : -.044746753 -63.3158499 -100. +C Times of minima : .575 .45 0.5 + PRINTER PLOT { Plot limits: (-4.475, 4.475) + 143 .1 0.0 1.0 REC { Plot card should show nice sinusoidal curve +BLANK card ending plot cards +BEGIN NEW DATA CASE +BLANK -- cgit v1.2.3