From b18347ffc9db9641e215995edea1c04c363b2bdf Mon Sep 17 00:00:00 2001 From: Angelo Rossi Date: Wed, 21 Jun 2023 12:04:16 +0000 Subject: Initial commit. --- benchmarks/dcn29.dat | 1376 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1376 insertions(+) create mode 100644 benchmarks/dcn29.dat (limited to 'benchmarks/dcn29.dat') diff --git a/benchmarks/dcn29.dat b/benchmarks/dcn29.dat new file mode 100644 index 0000000..817cb52 --- /dev/null +++ b/benchmarks/dcn29.dat @@ -0,0 +1,1376 @@ +BEGIN NEW DATA CASE +C BENCHMARK DCN-29 +C The first 11 subcases were provided by Prof. Aki Ametani on +C Feb. 28, 2000 for testing of "CABLE PARAMETERS" on 400 KV +C XLPE cables using IYG to represent the semi-conducting layer. +C The second 4 subcases were provided by Prof. Aki Ametani in May, +C 2000 for testing of impedance and admittance calculation for +C pipe type SC cables using "CABLE PARAMETERS". +C The last 3 subcases were provided by Prof. Mustafa Kizilcay: each +C is a case of Pipe type cable with a core semiconducting layer. +C Prof. Akihiro Ametani had to modify the code of CP to handle data +C with core admittance only (i.e., no input for sheath admittance). +C The code changes were sent to BPA on November 21, 2001 +C 1st of 32 subcases of dcn29.dat +CABLE PARAMETERS +C P Pt Ze ZC Zs ?? Zt Yt Zph Ti Tv Tot Re Im Mag Ang +MATRIX OUTPUTS 1 1 1 3 1 1 1 1 1 1 1 1 0 0 1 1 +C 22 December 2003, optional preceding definition of KZFL27(16) is added. +C This integer vector controls which matrices are to be outputed (to either +C LUNIT6 or separate disk files, or both), and what coordinates are to be +C used (e.g., a COMPLEX matrix, a matrix of real parts, a matrix of +C imaginary parts, a matrix of magnitudes, or a matrix of angles). +C Index Cols. Symbol Labeling of matrix in the LUNIT6 file +C ---------------------------------------------------------------------- +C 1 17-20 P Complex potential coefficient +C 2 21-24 Pt Transposed potential coefficient +C 3 25-28 Ze Earth impedance ZE, in ohm/m +C 4 29-32 Zc Conductor internal impedance ZC, in ohm/m +C 5 33-36 Zs Space impedance ZS, in ohm/m +C 6 37-40 Presently unused (reserved for later use) +C 7 41-44 Zt Total impedance [Zc], in ohm/m +C 8 45-48 Yt Total admittance [Yc], in mho/m +C 9 49-52 Zph Characteristic impedance matrix [Zc] in phase variables, in [ohm] +C 10 53-56 Ti The current transformation matrix [Ti] follows. ... +C 11 57-60 Tv Voltage transformation matrix [Tv]. ... +C Value 0 requests neither output +C Value 1 requests output just to LUNIT6 +C Value 2 requests output just to the dedicated disk file +C Value 3 requests both +C ---------------------------------------------------------------------- +C 12 61-64 Comp Complex matrix, with each cell a complex pair +C 13 65-68 Real Only the real part of the complex matrix +C 14 69-72 Imag Only the imaginary part of the complex matrix +C 15 73-76 Mag Only the magnitudes of the complex elements +C 16 77-80 Angle Only the angles in degrees of the complex elements +C Note: blank cols. 26-30 below is needed to preserve preceding requests. +C If not blank KZFLAG, MATRIX OUTPUTS requests will be over-written +C CASE 1 : NPP=0 for Mustafa 400kV XLPE cable + 3 0 1 0 1 0 0 0 0 2 +C 1 0 0 1000. .0000 A + 1.500 1.800 1.810 .6000E-06 1.000 1.000 1.000 + 1.227 209.3 + 2 + .0000 .2550E-01 .6050E-01 .6200E-01 .6700E-01 + .2300E-07 1.000 1.000 2.400 .3300E-07 1.000 1.000 2.400 + .1000E-11 .0000 .0000 .0000 + 50.0000 7000.00 1000. 2 +C Conductor internal impedance ZC, in ohm/m +C 2.19370E-04 2.93876E-05 +C 8.63256E-03 7.78018E-04 Core 1 +C Total impedance [Zc], in ohm/m +C 2.87787E-04 9.78052E-05 +C 2.63165E-02 1.84620E-02 Core 1 +C Total admittance [Yc], in mho/m +C 1.00000E-12 -1.00000E-12 +C 6.79707E-06 -6.79707E-06 Core 1 +C Characteristic impedance matrix [Zc] in phase variables, in [ohm]: +C 157.8968 123.8861 +C -.745143 -.354381 +C Voltage transformation matrix [Tv]. This gives the mapping from modal to ph.. +C 1.0 .9988989 +C -.52E-18 -.001736 +C Modal components +C Mode Attenuation Velocity Impedance (Ohm/m) Admittance (S/m) +C No. (db/km) (m/mic.s) Real Imag. Real Imag. +C 1 2.98701E-02 190.70 8.18980E-05 7.92568E-03 1.30794E-07 6.71127E-06 +C 2 5.03023E-03 295.43 1.42268E-04 1.84320E-02 7.40114E-11 1.20247E-06 +BLANK CARD ENDING FREQUENCY CARD +C BLANK CARD ENDING CABLE PARAMETERS +C BEGIN NEW DATA CASE +C 2nd of 32 subcases of dcn29.dat +C CABLE CONSTANTS -- Remove this extra request, which is old & no longer needed +C CABLE PARAMETERS +C 12 January, 2004, note about preceding. Remove exit and re-entry into CP +C to test stacked data subcases within CP. But we also must be able to read +C optional request cards (English text) at this point, so add copy of what +C was used in the preceding subcase. Also, add a BRANCH request: +C P Pt Ze ZC Zs ?? Zt Yt Zph Ti Tv Tot Re Im Mag Ang +MATRIX OUTPUTS 1 1 1 3 1 1 1 1 1 1 1 1 0 0 1 1 +BRANCH { No names are needed, since no branch cards are to be punched + 3 0 1 0 1 1 0 0 0 0 2 + 1.500 1.800 1.810 .6000E-06 1.000 1.000 1.000 + 1.227 209.3 + 2 + .0000 .2550E-01 .6050E-01 .6200E-01 .6700E-01 + .2300E-07 1.000 1.000 2.400 .3300E-07 1.000 1.000 2.400 + .1000E-11 .0000 .1000E-14 .0000 + 50.0000 7000.00 +C Total impedance [Zc], in ohm/m +C 2.87787E-04 9.78052E-05 +C 2.63165E-02 1.84620E-02 Core 1 +C Total admittance [Yc], in mho/m +C 1.00000E-12 -1.00000E-12 +C 6.79707E-06 -6.79707E-06 Core 1 +C Characteristic impedance matrix [Zc] in phase variables, in [ohm]: +C 157.8968 123.8861 +C -.747624 -.356858 +C Voltage transformation matrix [Tv]. This gives the mapping from modal to ph.. +C 1.0 .9988992 +C .112E-17 -.001736 +C Modal components +C Mode Attenuation Velocity Impedance (Ohm/m) Admittance (S/m) +C No. (db/km) (m/mic.s) Real Imag. Real Imag. +C 1 2.98701E-02 190.70 8.18923E-05 7.92567E-03 1.30799E-07 6.71128E-06 +C 2 4.97646E-03 295.43 1.41869E-04 1.84320E-02 0.00000E+00 1.20247E-06 +BLANK CARD ENDING FREQUENCY CARD +BLANK CARD ENDING CABLE PARAMETERS +BEGIN NEW DATA CASE +C 3rd of 32 subcases of dcn29.dat +C CABLE CONSTANTS -- Remove this extra request, which is old & no longer needed +CABLE PARAMETERS +C CASE 2 : NPP=1, NG=1 in CASE 1 gives the same result as CASE 1 + 3 -1 1 0 1 1 0 1 1 0 2 + 1.500 1.800 1.810 .6000E-06 1.000 1.000 1.000 + 1.227 209.3 + 2 + .0000 .2550E-01 .6050E-01 .6200E-01 .6700E-01 + .2300E-07 1.000 1.000 2.400 .3300E-07 1.000 1.000 2.400 + .1000E-11 .0000 .0000 .0000 + .0000 .0000 + 5.000 .0000 + 50.0000 7000.00 +C Earth impedance ZE, in ohm/m +C 6.34866E-03 6.34866E-03 6.34866E-03 +C 3.12516E-02 3.12516E-02 3.12516E-02 Core 1 +C Conductor internal impedance ZC, in ohm/m +C 2.19370E-04 2.93876E-05 0.00000E+00 +C 8.63256E-03 7.78018E-04 0.00000E+00 Core 1 +C Total impedance [Zc], in ohm/m +C 2.87787E-04 9.78052E-05 +C 2.63165E-02 1.84620E-02 Core 1 +C Total admittance [Yc], in mho/m +C 1.00000E-12 -1.00000E-12 +C 6.79707E-06 -6.79707E-06 Core 1 +C Characteristic impedance matrix [Zc] in phase variables, in [ohm]: +C 157.8968 123.8861 +C -.745143 -.354381 +C Voltage transformation matrix [Tv]. This gives the mapping from modal to ph.. +C 1.0 .9988989 +C .667E-18 -.001736 +C Modal components +C Mode Attenuation Velocity Impedance (Ohm/m) Admittance (S/m) +C No. (db/km) (m/mic.s) Real Imag. Real Imag. +C 1 2.98701E-02 190.70 8.18980E-05 7.92568E-03 1.30794E-07 6.71127E-06 +C 2 5.03023E-03 295.43 1.42268E-04 1.84320E-02 7.40114E-11 1.20247E-06 +BLANK CARD ENDING FREQUENCY CARD +BLANK CARD ENDING CABLE PARAMETERS +BEGIN NEW DATA CASE +C 4th of 32 subcases of dcn29.dat +C CABLE CONSTANTS -- Remove this extra request, which is old & no longer needed +CABLE PARAMETERS +C CASE 3 : G for sheath and pipe added to CASE 2, no difference + 3 -1 1 0 1 1 0 1 1 0 2 + 1.500 1.800 1.810 .6000E-06 1.000 1.000 1.000 + 1.227 209.3 + 2 + .0000 .2550E-01 .6050E-01 .6200E-01 .6700E-01 + .2300E-07 1.000 1.000 2.400 .3300E-07 1.000 1.000 2.400 + .1000E-11 .0000 .1000E-14 .0000 + .1000E-09 .0000 + 5.000 .0000 + 50.0000 7000.00 +C Total impedance [Zc], in ohm/m +C 2.87787E-04 9.78052E-05 +C 2.63165E-02 1.84620E-02 Core 1 +C Total admittance [Yc], in mho/m +C 1.00000E-12 -1.00000E-12 +C 6.79707E-06 -6.79707E-06 Core 1 +C Characteristic impedance matrix [Zc] in phase variables, in [ohm]: +C 157.8968 123.8861 +C -.747624 -.356858 +C Voltage transformation matrix [Tv]. This gives the mapping from modal to ph.. +C 1.0 .9988992 +C .869E-18 -.001736 +C Modal components +C Mode Attenuation Velocity Impedance (Ohm/m) Admittance (S/m) Charact. imp. (Ohm) Charact. Admit. (S) +C No. (db/km) (m/mic.s) Real Imag. Real Imag. Real Imag. Real Imag. +C 1 2.98701E-02 190.70 8.18923E-05 7.92567E-03 1.30799E-07 6.71128E-06 34.362 .157 2.91011E-02 -1.33208E-04 +C 2 4.97646E-03 295.43 1.41869E-04 1.84320E-02 0.00000E+00 1.20247E-06 123.809 -.476 8.07684E-03 3.10829E-05 +BLANK CARD ENDING FREQUENCY CARD +BLANK CARD ENDING CABLE PARAMETERS +BEGIN NEW DATA CASE +C 5th of 32 subcases of dcn29.dat +C CABLE CONSTANTS -- Remove this extra request, which is old & no longer needed +CABLE PARAMETERS +C CASE 4 : NG=0 in CASE 3, modes 2 and 3 same as modes1 and 2 in CASE 3 + 3 -1 1 0 1 1 0 1 0 0 2 + 1.500 1.800 1.810 .6000E-06 1.000 1.000 1.000 + 1.227 209.3 + 2 + .0000 .2550E-01 .6050E-01 .6200E-01 .6700E-01 + .2300E-07 1.000 1.000 2.400 .3300E-07 1.000 1.000 2.400 + .1000E-11 .0000 .1000E-14 .0000 + .1000E-09 .0000 + 5.000 .0000 + 50.0000 7000.00 +C Total impedance [Zc], in ohm/m +C 6.64784E-03 6.45786E-03 6.36006E-03 +C 5.76283E-02 4.97737E-02 3.13118E-02 Core 1 +C Total admittance [Yc], in mho/m +C 1.00000E-12 -1.00000E-12 -7.82293E-29 +C 6.79707E-06 -6.79707E-06 0.00000E+00 Core 1 +C Characteristic impedance matrix [Zc] in phase variables, in [ohm]: +C 166.3597 132.349 8.462883 +C -1.59843 -1.20766 -.850804 +C Voltage transformation matrix [Tv]. This gives the mapping from modal to ph.. +C 1.0 1.0 .9988992 +C -.33E-16 .485E-18 -.001736 +C Modal components +C Mode Attenuation Velocity Impedance (Ohm/m) Admittance (S/m) +C No. (db/km) (m/mic.s) Real Imag. Real Imag. +C 1 3.26383E+00 11.77 6.36006E-03 3.13118E-02 1.00000E-10 4.41654E-04 +C 2 2.98701E-02 190.70 8.18923E-05 7.92567E-03 1.30799E-07 6.71128E-06 +BLANK CARD ENDING FREQUENCY CARD +BLANK CARD ENDING CABLE PARAMETERS +BEGIN NEW DATA CASE +C 6th of 32 subcases of dcn29.dat +C CABLE CONSTANTS -- Remove this extra request, which is old & no longer needed +CABLE PARAMETERS +C CASE 4' : SC cable (pipe deleted in CASE 4), same mode 2 (coaxial mode) + 2 -1 1 0 1 1 0 0 0 0 2 + 2 + .0000 .2550E-01 .6050E-01 .6200E-01 .6700E-01 + .2300E-07 1.000 1.000 2.400 .3300E-07 1.000 1.000 2.400 + .1000E-11 .0000 .1000E-14 .0000 + 5.000 .0000 + 50.0000 7000.00 +C Total impedance [Zc], in ohm/m +C 6.59922E-03 6.40924E-03 +C 6.88745E-02 6.10200E-02 Core 1 +C Total admittance [Yc], in mho/m +C 1.00000E-12 -1.00000E-12 +C 6.79707E-06 -6.79707E-06 Core 1 +C Characteristic impedance matrix [Zc] in phase variables, in [ohm]: +C 62.37636 28.43276 +C -1.96318 -1.48045 +C Voltage transformation matrix [Tv]. This gives the mapping from modal to ph.. +C 1.000423 1.0 +C .7666E-3 0.0 +C Modal components +C Mode Attenuation Velocity Impedance (Ohm/m) Admittance (S/m) +C No. (db/km) (m/mic.s) Real Imag. Real Imag. +C 1 9.86029E-01 20.44 6.45273E-03 6.09895E-02 0.00000E+00 7.57164E-05 +C 2 2.98882E-02 190.70 2.33501E-04 7.82353E-03 0.00000E+00 6.79758E-06 +BLANK CARD ENDING FREQUENCY CARD +BLANK CARD ENDING CABLE PARAMETERS +BEGIN NEW DATA CASE +C 7th of 32 subcases of dcn29.dat +C CABLE CONSTANTS -- Remove this extra request, which is old & no longer needed +CABLE PARAMETERS +C CASE 4'' : Armor added to CASE 4', modes 1 and 3 nearly same as modes 1 and 2 inCASE 4' +C Results of this case changed on March 2, 2001 after implementing the +C correction that Prof. Ametani made on February 17, 2001. +C This correction only affects cables having 3 layers of conductors: core, +C sheath and armor. + 2 -1 1 0 1 1 0 0 0 0 2 + 3 + .0000 .2550E-01 .6050E-01 .6200E-01 .6700E-01 .6800E-01 .7300E-01 + .2300E-07 1.000 1.000 2.400 .3300E-07 1.000 1.000 2.400 + .3300E-07 1.000 1.000 2.400 + .1000E-11 .0000 .1000E-14 .0000 .1000E-09 .0000 + 5.000 .0000 + 50.0000 7000.00 +C Earth impedance ZE, in ohm/m +C 6.37984E-03 6.37984E-03 6.37984E-03 +C 5.94875E-02 5.94875E-02 5.94875E-02 Core 1 +C Conductor internal impedance ZC, in ohm/m +C 2.37056E-04 4.70742E-05 8.80821E-06 +C 9.38405E-03 1.52950E-03 6.87487E-04 Core 1 +C Total impedance [Zc], in ohm/m +C 6.61689E-03 6.42691E-03 6.38864E-03 +C 6.88716E-02 6.10170E-02 6.01750E-02 Core 1 +C Total admittance [Yc], in mho/m +C 1.00000E-12 -1.00000E-12 -7.82293E-29 +C 6.79707E-06 -6.79707E-06 -2.52554E-21 Core 1 +C Characteristic impedance matrix [Zc] in phase variables, in [ohm]: +C 64.41276 30.36306 27.00465 +C -.353587 -1.59075 -1.41604 +C Voltage transformation matrix [Tv]. This gives the mapping from modal to ph.. +C 1.000218 .8744759 1.0 +C .0012639 .3076899 0.0 +C Modal components +C Mode Attenuation Velocity Impedance (Ohm/m) Admittance (S/m) +C No. (db/km) (m/mic.s) Real Imag. Real Imag. +C 1 1.03955E+00 19.68 6.46233E-03 6.01540E-02 5.81320E-11 8.27664E-05 +C 2 2.07711E-01 179.08 1.52485E-04 7.95151E-04 3.49904E-07 7.52099E-05 +BLANK CARD ENDING FREQUENCY CARD +BLANK CARD ENDING CABLE PARAMETERS +BEGIN NEW DATA CASE +C 8th of 32 subcases of dcn29.dat +C CABLE CONSTANTS -- Remove this extra request, which is old & no longer needed +CABLE PARAMETERS +C CASE 5 : Sheath deleted in CASE 4, same mode 1 + 3 -1 1 1 1 0 0 1 0 0 2 + 1.500 1.800 1.810 .6000E-06 1.000 1.000 1.000 + 1.227 209.3 + 1 + .0000 .2550E-01 .6050E-01 + .2300E-07 1.000 1.000 2.400 + .1000E-11 .0000 + .1000E-09 .0000 + 5.000 .0000 + 50.0000 7000.00 +C Total impedance [Zc], in ohm/m +C 6.58868E-03 6.36006E-03 +C 5.76505E-02 3.13118E-02 Core 1 +C Total admittance [Yc], in mho/m +C 1.00000E-12 -1.00000E-12 +C 9.92816E-07 -9.92816E-07 Core 1 +C Characteristic impedance matrix [Zc] in phase variables, in [ohm]: +C 171.3428 8.462883 +C -1.55761 -.850804 +C Voltage transformation matrix [Tv]. This gives the mapping from modal to ph.. +C 1.0 1.0 +C -.15E-16 0.0 +C Modal components +C Mode Attenuation Velocity Impedance (Ohm/m) Admittance (S/m) +C No. (db/km) (m/mic.s) Real Imag. Real Imag. +C 1 3.26383E+00 11.77 6.36006E-03 3.13118E-02 1.00000E-10 4.41654E-04 +C 2 6.09657E-03 271.98 2.28622E-04 2.63388E-02 1.00000E-12 9.92816E-07 +BLANK CARD ENDING FREQUENCY CARD +BLANK CARD ENDING CABLE PARAMETERS +BEGIN NEW DATA CASE +C 9th of 32 subcases of dcn29.dat +C CABLE CONSTANTS -- Remove this extra request, which is old & no longer needed +CABLE PARAMETERS + 2 1 1 1 1 0 0 0 0 0 2 0 + 2 + .8000E-02 .1000E-01 .2700E-01 .3000E-01 .3100E-01 + .3000E-07 1.000 1.000 1.063 .3000E-07 1.000 1.000 1.100 + .1000E-14 .0000 .5000E-04 .0000 + .9000 .0000 + .100000E-07 .100000E+08 +C Total impedance [Zc], in ohm/m +C 2.96434E-02 5.88727E-03 +C 6.39622E+01 5.14569E+01 Core 1 +C Total admittance [Yc], in mho/m +C 1.00000E-15 -1.00000E-15 +C 3.74095E-03 -3.74095E-03 Core 1 +C Characteristic impedance matrix [Zc] in phase variables, in [ohm]: +C 302.9185 245.1014 +C 7.097006 7.151923 +C Voltage transformation matrix [Tv]. This gives the mapping from modal to ph.. +C 1.0 1.0 +C 0.0 -.97E-15 +C Modal components +C Mode Attenuation Velocity Impedance (Ohm/m) Admittance (S/m) +C No. (db/km) (m/mic.s) Real Imag. Real Imag. +C 1 1.78445E+00 290.50 2.37561E-02 1.25053E+01 0.00000E+00 3.74095E-03 +C 2 5.33727E+01 299.54 5.88727E-03 5.14569E+01 5.00000E-05 8.54359E-04 +BLANK CARD ENDING FREQUENCY CARD +BLANK CARD ENDING CABLE PARAMETERS +BEGIN NEW DATA CASE +C 10th of 32 subcases of dcn29.dat +C CABLE CONSTANTS -- Remove this extra request, which is old & no longer needed +CABLE PARAMETERS +C Sheath deleted from the previous case + 2 1 1 0 1 1 0 0 0 0 2 + 1 + .8000E-02 .1000E-01 .2700E-01 + .3000E-07 1.000 1.000 1.063 + .1000E-14 .0000 + .9000 .0000 + .100000E-07 .100000E+08 +C Total impedance [Zc], in ohm/m +C 1.74555E-02 +C 6.52741E+01 Core 1 +C Total admittance [Yc], in mho/m +C 1.00000E-15 +C 6.80840E-04 Core 1 +C Characteristic impedance matrix [Zc] in phase variables, in [ohm]: +C 309.6335 +C -.041401 +C ..The transpose of this is the inverse of the voltage transformation matrix. +C 1.0 +C 0.0 +C Voltage transformation matrix [Tv]. This gives the mapping from modal to ph.. +C 1.0 +C 0.0 +C Modal components +C Mode Attenuation Velocity Impedance (Ohm/m) Admittance (S/m) +C No. (db/km) (m/mic.s) Real Imag. Real Imag. +C 1 2.44832E-01 298.05 1.74555E-02 6.52741E+01 0.00000E+00 6.80840E-04 +BLANK CARD ENDING FREQUENCY CARD +BLANK CARD ENDING CABLE PARAMETERS +BEGIN NEW DATA CASE +C 11th of 32 subcases of dcn29.dat +C CABLE CONSTANTS -- Remove this extra request, which is old & no longer needed +CABLE PARAMETERS + 2 1 1 0 1 1 0 0 0 0 1 +C 1 0 0 2.000 .0000 A + 2 + .8000E-02 .1000E-01 .2700E-01 .3000E-01 .3100E-01 + .3000E-07 1.000 1.000 1.063 .3000E-07 1.000 1.000 1.100 + .0000 .1000E-14 .0000 .5500E-10 + .9000 .0000 + .100000E-07 .100000E+08 2.0 2 +C Total impedance [Zc], in ohm/m +C 2.96434E-02 5.88727E-03 +C 6.39622E+01 5.14569E+01 Core 1 +C Total admittance [Yc], in mho/m +C 0.00000E+00 0.00000E+00 +C 3.74102E-03 -3.74102E-03 Core 1 +C Characteristic impedance matrix [Zc] in phase variables, in [ohm]: +C 167.0808 109.2642 +C -.061167 -.006251 +C ... The transpose of this is the inverse of the voltage transformation matrix. +C 0.0 1.0 +C 0.0 -.67E-17 +C Voltage transformation matrix [Tv]. This gives the mapping from modal to ph.. +C 1.0 1.0 +C -.13E-18 0.0 +C Modal components +C Mode Attenuation Velocity Impedance (Ohm/m) Admittance (S/m) +C No. (db/km) (m/mic.s) Real Imag. Real Imag. +C 1 2.34002E-01 133.42 5.88727E-03 5.14569E+01 0.00000E+00 4.31011E-03 +C 2 1.78446E+00 290.49 2.37561E-02 1.25053E+01 0.00000E+00 3.74102E-03 +BLANK CARD ENDING FREQUENCY CARD +BLANK CARD ENDING CABLE PARAMETERS +BEGIN NEW DATA CASE +C 12th of 32 subcases of dcn29.dat +C 1st of four new test cases provided by Prof. Aki Ametani in May, 2000 +C for testing of Z and Y calculation for pipe type SC cables. +C Results of this case changed on March 2, 2001 after implementing the +C correction that Prof. Ametani made on February 17, 2001. +C This correction only affects cables having 3 layers of conductors: core, +C sheath and armor. +CABLE PARAMETERS +C 3 0 1 0 0 0 0 0 0 0 0 0 +C KMODE --- 18 October 2002, Tsu-huei Liu activates modal out + 3 0 1 0 1 0 0 0 0 0 0 0 +C Note about KMODE. DC-27 and 28 were changed comparably. + 1.500 1.510 1.800 .6000E-06 1.000 1.000 1.000 + 1.227 209.3 + 3 + .0000 .2550E-01 .2650E-01 .2850E-01 .6050E-01 .6200E-01 .6700E-01 + .2300E-07 1.000 1.000 2.400 .5000E-04 1.000 1.000 2.400 + .3300E-07 1.000 1.000 2.400 + 50.0000 7000.00 0 0 0 +C Total impedance [Zc], in ohm/m +C 2.87997E-04 1.27681E-04 9.78052E-05 +C 2.63165E-02 2.54931E-02 1.84620E-02 Core 1 +C Total admittance [Yc], in mho/m +C 0.00000E+00 0.00000E+00 0.00000E+00 +C 1.52664E-04 -1.52664E-04 0.00000E+00 Core 1 +C Characteristic impedance matrix [Zc] in phase variables, in [ohm]: +C 156.4303 154.7627 123.884 +C -.73725 -.757094 -.362581 +C Voltage transformation matrix [Tv]. This gives the mapping from modal to ph.. +C -.00105 .9999578 .9990462 +C -.00305 .0091876 -.001508 +C Modal components +C Mode Attenuation Velocity Impedance (Ohm/m) Admittance (S/m) +C No. (db/km) (m/mic.s) Real Imag. Real Imag. +C 1 2.95420E+01 12.87 1.44544E-01 6.53992E-04 0.00000E+00 1.60785E-04 +C 2 3.14054E-02 182.51 2.37593E-04 7.91624E-03 0.00000E+00 7.33482E-06 +BLANK card ending frequency cards within CABLE PARAMETERS +BLANK card ending CABLE CONSTANTS data subcases +BEGIN NEW DATA CASE +C 13th of 32 subcases of dcn29.dat +C 2nd of four new test cases provided by Prof. Aki Ametani in May, 2000 +C for testing of Z and Y calculation for pipe type SC cables. +C Results of this case changed on March 2, 2001 after implementing the +C correction that Prof. Ametani made on February 17, 2001. +C This correction only affects cables having 3 layers of conductors: core, +C sheath and armor. +CABLE PARAMETERS +C 3 -1 1 0 0 1 1 0 0 0 0 0 + 3 -1 1 0 1 1 1 0 0 0 0 0 + 1.500 1.650 1.780 .2000E-02 1.000 1.000 1.000 + 1.145 -30.15 + 3 + .0000 .2000E-01 .4200E-01 .4403E-01 .4503E-01 .4583E-01 .4983E-01 + .3746E-07 1.000 1.000 2.500 .2803E-07 1.000 1.000 2.500 + .7265E-06 1.000 1.000 8.000 + 100.000 50.0000 0 0 0 +C Conductor internal impedance ZC, in ohm/m +C 3.23928E-05 4.62469E-09 0.00000E+00 +C 7.23915E-05 9.23450E-06 5.80721E-06 Core 1 +C Total impedance [Zc], in ohm/m +C 6.88851E-05 3.64969E-05 3.64923E-05 +C 3.34994E-04 2.71837E-04 2.68410E-04 Core 1 +C Total admittance [Yc], in mho/m +C 0.00000E+00 0.00000E+00 0.00000E+00 +C 5.88913E-08 -5.88913E-08 -2.50068E-22 Core 1 +C Characteristic impedance matrix [Zc] in phase variables, in [ohm]: +C 233.0843 199.6486 198.9199 +C -22.5078 -16.4384 -16.401 +C Voltage transformation matrix [Tv]. This gives the mapping from modal to ph.. +C .4278E-4 -.688049 .9999471 +C -.772E-3 -.38441 -.01029 +C Modal components +C Mode Attenuation Velocity Impedance (Ohm/m) Admittance (S/m) +C No. (db/km) (m/mic.s) Real Imag. Real Imag. +C 1 4.87705E-01 5.59 3.13169E-03 2.65190E-06 0.00000E+00 2.01513E-06 +C 2 9.92211E-03 141.71 3.17026E-05 2.25959E-05 0.00000E+00 1.59766E-07 +BLANK card ending frequency cards within CABLE PARAMETERS +BLANK card ending CABLE CONSTANTS data subcases +BEGIN NEW DATA CASE +C 14th of 32 subcases of dcn29.dat +C 3rd of four new test cases provided by Prof. Aki Ametani in May, 2000 +C for testing of Z and Y calculation for pipe type SC cables. +C Results of this case changed on March 2, 2001 after implementing the +C correction that Prof. Ametani made on February 17, 2001. +C This correction only affects cables having 3 layers of conductors: core, +C sheath and armor. +CABLE PARAMETERS +C 3 0 2 0 0 0 0 0 0 0 0 0 + 3 0 2 0 1 0 0 0 0 0 0 0 + 1.500 1.510 1.800 .6000E-06 1.000 1.000 1.000 + 1.227 209.3 1.470 85.00 + 3 1 + .0000 .2550E-01 .2650E-01 .2850E-01 .6050E-01 .6200E-01 .6700E-01 + .2300E-07 1.000 1.000 2.400 .5000E-04 1.000 1.000 2.400 + .3300E-07 1.000 1.000 2.400 + .0000 .1010E-01 .1020E-01 + .2400E-07 1.000 1.000 1.000 + 50.0000 7000.00 0 0 0 +C Total impedance [Zc], in ohm/m +C 2.87997E-04 1.94860E-06 1.27681E-04 9.78052E-05 +C 2.63165E-02 2.46787E-05 2.54931E-02 1.84620E-02 Core 1 +C Total admittance [Yc], in mho/m +C 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 +C 1.52664E-04 -1.42472E-23 -1.52664E-04 -6.28731E-22 Core 1 +C Characteristic impedance matrix [Zc] in phase variables, in [ohm]: +C 156.4303 .1616253 154.7627 123.884 +C -.73725 -.006732 -.757093 -.362581 +C Voltage transformation matrix [Tv]. This gives the mapping from modal to ph.. +C -.00105 .9999578 -.296E-3 .9990462 +C -.00305 .0091876 .6651E-3 -.001507 +C Modal components +C Mode Attenuation Velocity Impedance (Ohm/m) Admittance (S/m) +C No. (db/km) (m/mic.s) Real Imag. Real Imag. +C 1 2.95420E+01 12.87 1.44544E-01 6.53992E-04 0.00000E+00 1.60785E-04 +C 2 3.14054E-02 182.51 2.37593E-04 7.91624E-03 0.00000E+00 7.33482E-06 +BLANK card ending frequency cards within CABLE PARAMETERS +BLANK card ending CABLE CONSTANTS data subcases +BEGIN NEW DATA CASE +C 15th of 32 subcases of dcn29.dat +C 4th of four new test cases provided by Prof. Aki Ametani in May, 2000 +C for testing of Z and Y calculation for pipe type SC cables. +C Results of this case changed on March 2, 2001 after implementing the +C correction that Prof. Ametani made on February 17, 2001. +C This correction only affects cables having 3 layers of conductors: core, +C sheath and armor. +CABLE PARAMETERS +C 3 -1 1 0 0 1 1 1 0 0 0 0 + 3 -1 1 0 1 1 1 1 0 0 0 0 + 1.500 1.650 1.780 .2000E-02 1.000 1.000 1.000 + 1.145 -30.15 + 3 + .0000 .2000E-01 .4200E-01 .4403E-01 .4503E-01 .4583E-01 .4983E-01 + .3746E-07 1.000 1.000 2.500 .2803E-07 1.000 1.000 2.500 + .7265E-06 1.000 1.000 8.000 + 40.00 .0000 + 100.000 50.0000 0 0 0 +C Earth impedance ZE, in ohm/m +C 4.64557E-05 4.64557E-05 4.64557E-05 4.64557E-05 +C 3.97608E-04 3.97608E-04 3.97608E-04 3.97608E-04 Core 1 +C Conductor internal impedance ZC, in ohm/m +C 3.23928E-05 4.62469E-09 0.00000E+00 0.00000E+00 +C 7.23915E-05 9.23450E-06 5.80721E-06 0.00000E+00 Core 1 +C Total impedance [Zc], in ohm/m +C 8.46452E-05 5.22570E-05 5.22524E-05 4.64567E-05 +C 6.90129E-04 6.26972E-04 6.23545E-04 4.05272E-04 Core 1 +C Total admittance [Yc], in mho/m +C 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 +C 5.88913E-08 -5.88913E-08 0.00000E+00 -5.49524E-26 Core 1 +C Characteristic impedance matrix [Zc] in phase variables, in [ohm]: +C 329.9094 295.7853 294.8116 25.57555 +C -39.8168 -32.0912 -31.97 8.072659 +C Voltage transformation matrix [Tv]. This gives the mapping from modal to ph.. +C .6929E-5 .0989196 -.286086 1.0 +C -.849E-3 .2522515 .0341845 -.711E-4 +C Modal components +C Mode Attenuation Velocity Impedance (Ohm/m) Admittance (S/m) +C No. (db/km) (m/mic.s) Real Imag. Real Imag. +C 1 4.87706E-01 5.59 3.13145E-03 2.65107E-06 0.00000E+00 2.01530E-06 +C 2 9.73010E-02 21.36 1.39867E-03 3.85548E-04 0.00000E+00 2.35598E-07 +BLANK card ending frequency cards within CABLE PARAMETERS +BLANK card ending CABLE CONSTANTS data subcases +BEGIN NEW DATA CASE +C 16th of 32 subcases of dcn29.dat +C The 1st of 3 subcases provided by Prof. Mustafa Kizilcay: each +C is a case of Pipe type cable with a core semiconducting layer. +C Different IYG options are used in representing the distributed +C admittance for the core and sheath. +C This subcase uses input option of IYG =1, i.e., capacitance +CABLE PARAMETERS + 3 0 1 0 0 0 0 1 0 + 1.5 1.8 1.51 6.E-7 1. 1. 1. + 1.2267 209.3 + 2 + 0.0 0.0255 0.0605 0.062 0.067 + 2.3E-8 1. 1. 2.4 3.3E-8 1. 1. 2.4 + 0.0 1.E-9 + 50. 7.E3 +C Total impedance [Zc], in ohm/m +C 2.87707E-04 9.77249E-05 +C 2.63251E-02 1.84706E-02 Core 1 +C Total admittance [Yc], in mho/m +C 0.00000E+00 0.00000E+00 +C 5.07794E-05 -5.07794E-05 Core 1 +BLANK CARD ENDING FREQUENCY CARDS +BLANK CARD ENDING CABLE PARAMETERS +BEGIN NEW DATA CASE +C 17th of 32 subcases of dcn29.dat +C The 2nd of 3 subcases provided by Prof. Mustafa Kizilcay: each +C is a case of Pipe type cable with a core semiconducting layer. +C This subcase uses input option of IYG =2, i.e., conductance +CABLE PARAMETERS +C 3 0 1 0 0 0 2 0 + 3 0 1 1 0 0 0 0 2 0 + 1.5 1.8 1.51 6.E-7 1. 1. 1. + 1.2267 209.3 + 2 + 0.0 0.0255 0.0605 0.062 0.067 + 2.3E-8 1. 1. 2.4 3.3E-8 1. 1. 2.4 + .1E-07 0. + 50. 7.E3 +C Total impedance [Zc], in ohm/m +C 2.87707E-04 9.77249E-05 +C 2.63251E-02 1.84706E-02 Core 1 +C Total admittance [Yc], in mho/m +C 1.00000E-08 -1.00000E-08 +C 6.79707E-06 -6.79707E-06 Core 1 +C Characteristic impedance matrix [Zc] in phase variables, in [ohm]: +C 157.956 123.9451 +C -.719843 -.354075 +C Voltage transformation matrix [Tv]. This gives the mapping from modal to ph.. +C 1.0 .9989039 +C .165E-18 -.001738 +C Modal components +C Mode Attenuation Velocity Impedance (Ohm/m) Admittance (S/m) +C No. (db/km) (m/mic.s) Real Imag. Real Imag. +C 1 3.13436E-02 190.70 8.17996E-05 7.92551E-03 1.40752E-07 6.71122E-06 +C 2 5.02506E-03 295.43 1.42186E-04 1.84406E-02 7.40835E-11 1.20188E-06 +BLANK CARD ENDING FREQUENCY CARDS +BLANK CARD ENDING CABLE PARAMETERS +BEGIN NEW DATA CASE +C 18th of 32 subcases of dcn29.dat +C The 3rd of 3 subcases provided by Prof. Mustafa Kizilcay: each +C is a case of Pipe type cable with a core semiconducting layer. +C This subcase uses input option of IYG =3, i.e., capacitance and +C conductance +CABLE PARAMETERS +C 3 0 1 0 0 0 3 0 + 3 0 1 1 0 0 0 0 3 0 + 1.5 1.8 1.51 6.E-7 1. 1. 1. + 1.2267 209.3 + 2 + 0.0 0.0255 0.0605 0.062 0.067 + 2.3E-8 1. 1. 2.4 3.3E-8 1. 1. 2.4 + .1E-09 .1E-8 + 50. 7.E3 +C Total impedance [Zc], in ohm/m +C 2.87707E-04 9.77249E-05 +C 2.63251E-02 1.84706E-02 Core 1 +C Total admittance [Yc], in mho/m +C 1.00000E-10 -1.00000E-10 +C 5.07794E-05 -5.07794E-05 Core 1 +C Characteristic impedance matrix [Zc] in phase variables, in [ohm]: +C 134.1509 121.6984 +C -.534633 -.405567 +C Voltage transformation matrix [Tv]. This gives the mapping from modal to ph.. +C 1.0 .9999033 +C .106E-19 -.148E-3 +C Modal components +C Mode Attenuation Velocity Impedance (Ohm/m) Admittance (S/m) +C No. (db/km) (m/mic.s) Real Imag. Real Imag. +C 1 8.16801E-02 69.77 1.40691E-04 7.88844E-03 6.04510E-07 5.03760E-05 +C 2 5.10661E-03 290.17 1.41595E-04 1.84403E-02 9.85486E-11 1.24588E-06 +BLANK CARD ENDING FREQUENCY CARDS +BLANK CARD ENDING CABLE PARAMETERS +BEGIN NEW DATA CASE +C 19th of 32 subcases of dcn29.dat +C From Steve Nurse of British Short-Circuit Testing Station Limited +C in Hebburn, Tyne & Wear, UK. This data was mentioned in EEUG list +C server mail dated 15 October 2003. Add it here October 28th. +C The problem has been solved as this data demonstrates. Mr. Nurse +C had complained: "The PI model gave almost exactly the R and X +C values supplied by the manufacturer for both sheath earthing conditions. +C However, the distributed parameter model gave an inductive reactance +C value about 55% greater than the PI model!" No longer. +C 3 SEPARATE CABLES,EACH CABLE SCREENED; 150sqmm, SOLID ALUMINUIM, SINGLE CORE, +C CABLE CONSTANTS -- Remove this extra request, which is old & no longer needed +CABLE PARAMETERS +C +BRANCH C1PHSRC2PHSRC1PHSYC2PHSYC1PHSBC2PHSBC1SCNRC2SCNRC1SCNYC2SCNYC1SCNBC2SCNB +$ERASE +C ITPISYSTIEARTKMODEIZFLAIYFLANGRNDIDATA + 2 -1 3 1 0 3 0 0 +C NCP<---R2---><---R3---><---R4---><---R5---><---R6---><---R7---> + 0.0 6.5E-3 1.2619E-2 1.275E-2 1.485E-2 +C **** CABLE PERMEABILITY & PERMITTIVITY **** +C --pc---><---uc---><--uil---><--Eil---><---ps---><---us---><--ui2---><--Ei2---> + 2.73E-8 1.0 1.0 3.92 1.7E-8 1.0 1.0 2.5 +C **** CABLE ARMOUR DATA : ONLY REQURED IF ARMOUR IS INCLUDED **** + 0.0 6.5E-3 1.2619E-2 1.275E-2 1.485E-2 + 2.73E-8 1.0 1.0 3.92 1.7E-8 1.0 1.0 2.5 + 0.0 6.5E-3 1.2619E-2 1.275E-2 1.485E-2 + 2.73E-8 1.0 1.0 3.92 1.7E-8 1.0 1.0 2.5 +C -VERT--><-HORIZ--><--VERT--><-HORIZ--><--VERT--><-HORIZ--><--VERT--><-HORIZ--> + 1.035 0.015 1.035 0.045 1.009 0.030 +C ----ROE-----><------FREQ--->IDEC>IPNT><-DIST-><-IPUNCH-> + 100. 50. 1.0 2 +C Total impedance [Zc], in ohm/m +C 5.31157E-04 3.23297E-04 3.23290E-04 +C 3.40759E-04 2.28987E-04 2.28958E-04 Core 1 +C Total admittance [Yc], in mho/m +C 0.00000E+00 0.00000E+00 0.00000E+00 +C 1.03273E-07 0.00000E+00 0.00000E+00 Core 1 +C Characteristic impedance matrix [Zc] in phase variables, in [ohm]: +C 61.9281 20.89422 20.89167 +C -34.676 -10.151 -10.1519 +C Voltage transformation matrix [Tv]. This gives the mapping from modal to ph.. +C 1.0 -.49999 1.0 +C .1257E-5 .1257E-5 .12E-15 +C Modal components +C Mode Attenuation Velocity Impedance (Ohm/m) Admittance (S/m) Charact. imp. (Ohm) Charact. Admit. (S) +C No. (db/km) (m/mic.s) Real Imag. Real Imag. Real Imag. Real Imag. +C 1 4.93171E-02 29.33 3.92585E-04 2.66236E-04 0.00000E+00 3.09816E-07 34.572 -18.327 2.25802E-02 1.19698E-02 +C 2 2.19975E-02 74.13 1.38577E-04 7.45471E-05 0.00000E+00 1.54908E-07 27.359 -16.349 2.69334E-02 1.60945E-02 + 100. 50. 1.0 1 +BLANK card ending frequency cards +$PUNCH +C <++++++> Cards punched by support routine on 11-Nov-18 11.00.00 <++++++> +C CABLE PARAMETERS +C BRANCH C1PHSRC2PHSRC1PHSYC2PHSYC1PHSBC2PHSBC1SCNRC2SCNRC1SCNYC2SCNYC1SCNBC2SC +C $ERASE +C 2 -1 3 1 0 3 0 0 +C 2 2 2 +C 0.0 6.5E-3 1.2619E-2 1.275E-2 1.485E-2 +C 2.73E-8 1.0 1.0 3.92 1.7E-8 1.0 1.0 2.5 +C 0.0 6.5E-3 1.2619E-2 1.275E-2 1.485E-2 +C 2.73E-8 1.0 1.0 3.92 1.7E-8 1.0 1.0 2.5 +C 0.0 6.5E-3 1.2619E-2 1.275E-2 1.485E-2 +C 2.73E-8 1.0 1.0 3.92 1.7E-8 1.0 1.0 2.5 +C 1.035 0.015 1.035 0.045 1.009 0.030 +C 100. 50. 1.0 2 +C $VINTAGE, 1 +C Branch cards for constant-parameter distributed: +C -1C1PHSRC2PHSR 3.92585E-04 2.93145E+01 2.93310E+07-1.00000E+00 1 3 +C -2C1PHSYC2PHSY 1.38577E-04 2.19371E+01 7.41268E+07-1.00000E+00 1 3 +C -3C1PHSBC2PHSB 1.03930E-04 1.64492E+01 7.41343E+07-1.00000E+00 1 3 +C .33333777 -.33333112 .50000000 +C .00000042 .00000084 .00000000 +C .33333777 -.33333112 -.50000000 +C .00000042 .00000084 .00000000 +C .33333112 .66667553 .00000000 +C -.00000084 .00000084 .00000000 +C $VINTAGE, -1, +C <++++++> Cards punched by support routine on 11-Nov-18 11.00.00 <++++++> +C 100. 50. 1.0 1 +C $UNITS, 0.0, 0.0 +C $VINTAGE, 1 +C Pi-equivalent model with length = 1.0000E+00 (meter) +C 1C1PHSRC2PHSR 5.31156894E-04 1.08467088E-03 3.28729088E-04 +C 2C1PHSYC2PHSY 3.23297149E-04 7.28887046E-04 0.00000000E+00 +C 5.31156894E-04 1.08467088E-03 3.28729088E-04 +C 3C1PHSBC2PHSB 3.23290019E-04 7.28794841E-04 0.00000000E+00 +C 3.23290019E-04 7.28794841E-04 0.00000000E+00 +C 5.31147266E-04 1.08470783E-03 3.28729088E-04 +C $VINTAGE, -1, +C $UNITS, -1., -1., +C =========< End of LUNIT7 punched cards as flushed by $PUNCH request >======= +BLANK card ending "CABLE PARAMETERS" data subcases +BEGIN NEW DATA CASE +C 20th of 32 subcases of dcn29.dat +C From Andrea Mansoldo of Pirelli Cavi e Sistemi in Italy. This data +C is added 28 October 2003 following correction of NEWCBL.SPL +$ERASE +C CABLE CONSTANTS -- Remove this extra request, which is old & no longer needed +CABLE PARAMETERS +BRANCH PIC111PIC112PIC121PIC122PIC131PIC132ABC151ABC152ABC161ABC162ABC171ABC172 +BRANCH PIS111PIS112PIS121PIS122PIS131PIS132ABS151ABS152ABS161ABS162ABS171ABS172 +BRANCH PIE141PIE142ABE161ABE162PIP111PIP112 +C +C 4 kilohertz, PI-EQ 2067 metri +C 1 2 3 4 5 6 7 +C 345678901234567890123456789012345678901234567890123456789012345678901234567890 + 3 -1 8 0 2 2 1 0 0 3 +C Begin pipe parameter card + 1.2 1.45 1.551.50000E-7 100. 1. 1. +C Begin cross section location cards + .725 180. .725 142. .725 218. .725 0 + .725 38. .725 322. 1.16 239. 1.16 301. +C Begin card indicating number of conductors + 2 2 2 2 2 2 1 1 +C Begin geometrical & physical data cards + .004 .0317 .06395 .06525 .07085 +2.73600E-8 1. 1. 2.8421.25600E-7 1. 1. 2.5 + 1.E-6 1.E-8 1.E-6 1.E-8 + .004 .0317 .06395 .06525 .07085 +2.73600E-8 1. 1. 2.8421.25600E-7 1. 1. 2.5 + 1.E-6 1.E-8 1.E-6 1.E-8 + .004 .0317 .06395 .06525 .07085 +2.73600E-8 1. 1. 2.8421.25600E-7 1. 1. 2.5 + 1.E-6 1.E-8 1.E-6 1.E-8 + .004 .0317 .06395 .06525 .07085 +2.73600E-8 1. 1. 2.8421.25600E-7 1. 1. 2.5 + 1.E-6 1.E-8 1.E-6 1.E-8 + .004 .0317 .06395 .06525 .07085 +2.73600E-8 1. 1. 2.8421.25600E-7 1. 1. 2.5 + 1.E-6 1.E-8 1.E-6 1.E-8 + .004 .0317 .06395 .06525 .07085 +2.73600E-8 1. 1. 2.8421.25600E-7 1. 1. 2.5 + 1.E-6 1.E-8 1.E-6 1.E-8 + 0. .0065 .0085 +2.38900E-8 1. 1. 2.2 + 10.E-3 1.E-8 + 0. .0065 .0085 +2.38900E-8 1. 1. 2.2 + 10.E-3 1.E-8 +C +c pipe + 2.E-3 1.E-8 +C conductances from core to sheath (low) +C +C 1 2 3 4 5 6 7 +C 345678901234567890123456789012345678901234567890123456789012345678901234567890 +c +C Pipe location card + 3.325 +C Begin frequency & earth resistivty cards + 100. 50. 825. 1 +C Earth impedance ZE, in ohm/m +C 4.89784E-05 4.89784E-05 4.89784E-05 4.89784E-05 4.89784E-05 4.89784E-05 .. +C 4.02440E-04 4.02440E-04 4.02440E-04 4.02440E-04 4.02440E-04 4.02440E-04 .. +C Conductor internal impedance ZC, in ohm/m +C 1.38786E-05 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 .. +C 6.18566E-05 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 .. +C Total impedance [Zc], in ohm/m +C 8.19882E-05 6.54811E-05 6.54811E-05 5.89287E-05 5.92396E-05 5.92396E-05 .. +C 6.38810E-04 4.64085E-04 4.64085E-04 4.23660E-04 4.24767E-04 4.24767E-04 .. +C Total admittance [Yc], in mho/m +C 1.00000E-06 4.01383E-26 -2.20019E-26 3.65290E-26 -7.67948E-27 -3.09459E-26 .. +C 3.21237E-06 -7.81241E-23 -7.17333E-23 -1.33579E-22 -7.16710E-23 -8.17287E-23 .. +BLANK CARD ending frequency card +$PUNCH +C <++++++> Cards punched by support routine on 11-Nov-18 11.00.00 <++++++> +C CABLE PARAMETERS +C BRANCH PIC111PIC112PIC121PIC122PIC131PIC132ABC151ABC152ABC161ABC162ABC171ABC1 +C BRANCH PIS111PIS112PIS121PIS122PIS131PIS132ABS151ABS152ABS161ABS162ABS171ABS1 +C BRANCH PIE141PIE142ABE161ABE162PIP111PIP112 +C 3 -1 8 0 2 2 1 0 0 3 +C 1.2 1.45 1.551.50000E-7 100. 1. 1. +C .725 180. .725 142. .725 218. .725 +C .725 38. .725 322. 1.16 239. 1.16 30 +C 2 2 2 2 2 2 1 1 +C .004 .0317 .06395 .06525 .07085 +C 2.73600E-8 1. 1. 2.8421.25600E-7 1. 1. 2 +C 1.E-6 1.E-8 1.E-6 1.E-8 +C .004 .0317 .06395 .06525 .07085 +C 2.73600E-8 1. 1. 2.8421.25600E-7 1. 1. 2 +C 1.E-6 1.E-8 1.E-6 1.E-8 +C .004 .0317 .06395 .06525 .07085 +C 2.73600E-8 1. 1. 2.8421.25600E-7 1. 1. 2 +C 1.E-6 1.E-8 1.E-6 1.E-8 +C .004 .0317 .06395 .06525 .07085 +C 2.73600E-8 1. 1. 2.8421.25600E-7 1. 1. 2 +C 1.E-6 1.E-8 1.E-6 1.E-8 +C .004 .0317 .06395 .06525 .07085 +C 2.73600E-8 1. 1. 2.8421.25600E-7 1. 1. 2 +C 1.E-6 1.E-8 1.E-6 1.E-8 +C .004 .0317 .06395 .06525 .07085 +C 2.73600E-8 1. 1. 2.8421.25600E-7 1. 1. 2 +C 1.E-6 1.E-8 1.E-6 1.E-8 +C 0. .0065 .0085 +C 2.38900E-8 1. 1. 2.2 +C 10.E-3 1.E-8 +C 0. .0065 .0085 +C 2.38900E-8 1. 1. 2.2 +C 10.E-3 1.E-8 +C 2.E-3 1.E-8 +C 3.325 +C 100. 50. 825. 1 +C $UNITS, 0.0, 0.0 +C $VINTAGE, 1 +C Pi-equivalent model with length = 8.2500E+02 (meter) +C 1PIC111PIC112 6.76402865E-02 1.67755129E+00 8.43586710E+00 +C 2PIC121PIC122 5.40219112E-02 1.21871468E+00 -2.05158250E-16 +C 6.76402865E-02 1.67755129E+00 8.43586710E+00 +C 3PIC131PIC132 5.40219112E-02 1.21871468E+00 -1.88375719E-16 +C 5.10964825E-02 1.14611087E+00 5.34047879E-18 +C 6.76402865E-02 1.67755129E+00 8.43586710E+00 +C ............... +C 15PIP111PIP112 4.53392266E-02 1.08351780E+00 -4.08654688E-15 +C 4.53392266E-02 1.08351780E+00 -1.39520765E-15 +C 4.53392266E-02 1.08351780E+00 1.90309156E-15 +C ................... +C 4.53392266E-02 1.08351780E+00 7.50414939E+01 +C $VINTAGE, -1, +C $UNITS, -1., -1., +C =========< End of LUNIT7 punched cards as flushed by $PUNCH request >======= +BLANK CARD ending CABLE PARAMETERS +BEGIN NEW DATA CASE +C 21st of 32 subcases of dcn29.dat +C 1st of 11 cases received from Prof. Ametani on October 28, 2003 +CABLE PARAMETERS +C ********************Case 11-0******************** +C 1 PROGRAM CP7-2000.5 : CABLE PARAMETERS MODE-2 BY A.AMETANI +C ACCURATE FORMULAS VERSION (INDEPENDENT CABLE CONSTANTS) +C Case 11-0 ; PT cable with one SC cable of core/sheath; IYG=0 + 3 -1 1 0 1 1 0 1 0 0 0 0 +1.500 1.800 1.810 0.6000E-06 1.000 1.000 1.000 +1.227 209.3 + 2 + 0.000 0.2550E-010.6050E-010.6200E-010.6700E-01 +0.2300E-07 1.000 1.000 2.400 0.3300E-07 1.000 1.000 2.400 + 5.000 0.000 + 50.0000 7000.00 0 0 0 +C Total impedance [Zc], in ohm/m +C 6.64784E-03 6.45786E-03 6.36006E-03 +C 5.76283E-02 4.97737E-02 3.13118E-02 Core 1 +C Total admittance [Yc], in mho/m +C 0.00000E+00 0.00000E+00 0.00000E+00 +C 6.79707E-06 -6.79707E-06 0.00000E+00 Core 1 +C Characteristic impedance matrix [Zc] in phase variables, in [ohm]: +C 166.3596 132.349 8.462883 +C -1.6011 -1.21034 -.850805 +C Voltage transformation matrix [Tv]. This gives the mapping from modal to phase variables: v-phase = [Tv] * v-mode +C 1.0 .9999525 .9988992 +C -.59E-16 .0097432 -.001747 +C Modal components +C Mode Attenuation Velocity Impedance (Ohm/m) Admittance (S/m) +C No. (db/km) (m/mic.s) Real Imag. Real Imag. +C 1 3.26383E+00 11.77 6.36006E-03 3.13118E-02 0.00000E+00 4.41654E-04 +C 2 2.98699E-02 190.70 2.36313E-04 7.92257E-03 0.00000E+00 6.71255E-06 +BLANK card ending frequency cards +BLANK card ending "CABLE PARAMETERS" data subcases +BEGIN NEW DATA CASE +C 22nd of 32 subcases of dcn29.dat +C 2nd of 11 cases received from Prof. Ametani on October 28, 2003 +CABLE PARAMETERS +C ********************Case 11-1******************** +C Case 11-1; PT cable with one SC cable of core/sheath; IYG=3 + 3 -1 1 0 1 1 0 1 0 0 3 0 +1.500 1.800 1.810 0.6000E-06 1.000 1.000 1.000 +1.227 209.3 + 2 + 0.000 0.2550E-010.6050E-010.6200E-010.6700E-01 +0.2300E-07 1.000 1.000 2.400 0.3300E-07 1.000 1.000 2.400 +0.1500E-040.1000E-080.5000E-050.1000E-10 +0.2500E-040.1000E-09 + 5.000 0.000 + 50.0000 7000.00 0 0 0 +C Total impedance [Zc], in ohm/m +C 6.64784E-03 6.45786E-03 6.36006E-03 +C 5.76283E-02 4.97737E-02 3.13118E-02 Core 1 +C Total admittance [Yc], in mho/m +C 1.50000E-05 -1.50000E-05 1.22836E-22 +C 5.07794E-05 -5.07794E-05 -6.16963E-22 Core 1 +C Characteristic impedance matrix [Zc] in phase variables, in [ohm]: +C 68.59313 56.51818 8.434837 +C 35.58395 33.96906 -.610079 +C Voltage transformation matrix [Tv]. This gives the mapping from modal to ph.. +C 1.0 1.0 .9992509 +C .67E-16 .359E-18 .146E-3 +C Modal components +C Mode Attenuation Velocity Impedance (Ohm/m) Admittance (S/m) +C No. (db/km) (m/mic.s) Real Imag. Real Imag. +C 1 4.19527E+00 11.74 6.36006E-03 3.13118E-02 2.50000E-05 4.46053E-04 +C 2 8.82755E-01 69.19 1.51619E-04 7.91257E-03 1.53712E-05 5.00638E-05 +BLANK card ending frequency cards +BLANK card ending "CABLE PARAMETERS" data subcases +BEGIN NEW DATA CASE +C 23rd of 32 subcases of dcn29.dat +C 3rd of 11 cases received from Prof. Ametani on October 28, 2003 +CABLE PARAMETERS +C ********************Case 12-0******************** +C Case 12-0; PT cable with one SC cable of core/sheath/armor; IYG=0 + 3 -1 1 0 1 1 0 1 0 0 0 0 + 1.500 1.800 1.810 0.6000E-06 1.000 1.000 1.000 + 1.227 209.3 + 3 + 0.000 0.2550E-010.6050E-010.6200E-010.6700E-010.6900E-010.7400E-01 +0.2300E-07 1.000 1.000 2.400 0.3300E-07 1.000 1.000 2.400 +0.2000E-07 1.000 1.000 3.000 + 5.000 0.000 + 50.0000 7000.00 0 0 0 +C Earth impedance ZE, in ohm/m +C 6.34866E-03 6.34866E-03 6.34866E-03 6.34866E-03 +C 3.12516E-02 3.12516E-02 3.12516E-02 3.12516E-02 Core 1 +C Conductor internal impedance ZC, in ohm/m +C 3.26963E-04 1.36981E-04 5.33464E-05 0.00000E+00 +C 9.38963E-03 1.53508E-03 6.85403E-04 0.00000E+00 Core 1 +C Total impedance [Zc], in ohm/m +C 6.75544E-03 6.56546E-03 6.48182E-03 6.36006E-03 +C 5.75112E-02 4.96567E-02 4.88070E-02 3.13118E-02 Core 1 +C Total admittance [Yc], in mho/m +C 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 +C 6.79707E-06 -6.79707E-06 -3.01702E-20 0.00000E+00 Core 1 +C Characteristic impedance matrix [Zc] in phase variables, in [ohm]: +C 163.1724 129.181 125.815 8.462883 +C -1.8345 -1.4196 -1.25847 -.850805 +C Voltage transformation matrix [Tv]. This gives the mapping from modal to ph.. +C 1.0 .9287082 .9995322 .9995617 +C -.11E-13 .3563902 -.030584 -.644E-4 +C Modal components +C Mode Attenuation Velocity Impedance (Ohm/m) Admittance (S/m) +C No. (db/km) (m/mic.s) Real Imag. Real Imag. +C 1 3.26383E+00 11.77 6.36006E-03 3.13118E-02 0.00000E+00 4.41654E-04 +C 2 1.68391E-01 177.84 1.35154E-04 8.56765E-04 0.00000E+00 7.09500E-05 +BLANK card ending frequency cards +BLANK card ending "CABLE PARAMETERS" data subcases +BEGIN NEW DATA CASE +C 24th of 32 subcases of dcn29.dat +C 4th of 11 cases received from Prof. Ametani on October 28, 2003 +CABLE PARAMETERS +C ********************Case 12-1******************** +C Case 12-1; PT cable with one SC cable of core/sheath/armor; IYG=3 + 3 -1 1 0 1 1 0 1 0 0 3 0 + 1.500 1.800 1.810 0.6000E-06 1.000 1.000 1.000 + 1.227 209.3 + 3 + 0.000 0.2550E-010.6050E-010.6200E-010.6700E-010.6900E-010.7400E-01 +0.2300E-07 1.000 1.000 2.400 0.3300E-07 1.000 1.000 2.400 +0.2000E-07 1.000 1.000 3.000 +0.1500E-040.1000E-080.5000E-050.1000E-100.1000E-040.1000E-10 +0.2500E-040.1000E-09 + 5.000 0.000 + 50.0000 7000.00 0 0 0 +C Total impedance [Zc], in ohm/m +C 6.75544E-03 6.56546E-03 6.48182E-03 6.36006E-03 +C 5.75112E-02 4.96567E-02 4.88070E-02 3.13118E-02 Core 1 +C Total admittance [Yc], in mho/m +C 1.50000E-05 -1.50000E-05 -2.37535E-21 3.41626E-22 +C 5.07794E-05 -5.07794E-05 -2.43949E-20 -1.92016E-21 Core 1 +C Characteristic impedance matrix [Zc] in phase variables, in [ohm]: +C 55.67291 43.58791 40.27757 8.434837 +C 27.58217 25.96881 26.05425 -.610079 +C Voltage transformation matrix [Tv]. This gives the mapping from modal to ph.. +C 1.0 1.0 1.000846 .9962176 +C .746E-16 .548E-18 .3296E-3 -.010838 +C Modal components +C Mode Attenuation Velocity Impedance (Ohm/m) Admittance (S/m) +C No. (db/km) (m/mic.s) Real Imag. Real Imag. +C 1 4.19527E+00 11.74 6.36006E-03 3.13118E-02 2.50000E-05 4.46053E-04 +C 2 8.82571E-01 69.19 1.29405E-04 7.89410E-03 1.55431E-05 5.01389E-05 +BLANK card ending frequency cards +BLANK card ending "CABLE PARAMETERS" data subcases +BEGIN NEW DATA CASE +C 25th of 32 subcases of dcn29.dat +C 5th of 11 cases received from Prof. Ametani on October 28, 2003 +CABLE PARAMETERS +C ********************Case 21-0******************** +C Case 21-0; PT cable with 3-phase SC cable of core/sheath; IYG=0 + 3 -1 3 0 1 1 0 1 0 0 0 0 + 1.500 1.800 1.810 0.6000E-06 1.000 1.000 1.000 + 1.227 209.3 1.227 89.30 1.227 329.3 + 2 2 2 + 0.000 0.2550E-010.6050E-010.6200E-010.6700E-01 +0.2300E-07 1.000 1.000 2.400 0.3300E-07 1.000 1.000 2.400 + 0.000 0.2550E-010.6050E-010.6200E-010.6700E-01 +0.2300E-07 1.000 1.000 2.400 0.3300E-07 1.000 1.000 2.400 + 0.000 0.2550E-010.6050E-010.6200E-010.6700E-01 +0.2300E-07 1.000 1.000 2.400 0.3300E-07 1.000 1.000 2.400 + 5.000 0.000 + 50.0000 7000.00 0 0 0 +C Total impedance [Zc], in ohm/m +C 6.64784E-03 6.36360E-03 6.36360E-03 6.45786E-03 6.36360E-03 6.36360E-03 6.36006E-03 +C 5.76283E-02 3.15489E-02 3.15489E-02 4.97737E-02 3.15489E-02 3.15489E-02 3.13118E-02 Core 1 +C Total admittance [Yc], in mho/m +C 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 +C 6.79707E-06 -7.40107E-24 0.00000E+00 -6.79707E-06 -1.06799E-23 -9.08817E-24 0.00000E+00 Core 1 +C Characteristic impedance matrix [Zc] in phase variables, in [ohm]: +C 166.3596 10.06705 10.06705 132.349 10.06704 10.06704 8.462883 +C -1.6011 -.862671 -.862671 -1.21034 -.862727 -.862727 -.850805 +C Voltage transformation matrix [Tv]. This gives the mapping from modal to ph.. +C 1.0 .1929E-5 .1929E-5 .9999525 -.499442 -.998885 .9989272 +C -.51E-17 -.575E-5 -.575E-5 .0097433 .8853E-3 .0017706 -.001702 +C Modal components +C Mode Attenuation Velocity Impedance (Ohm/m) Admittance (S/m) +C No. (db/km) (m/mic.s) Real Imag. Real Imag. +C 1 3.26383E+00 11.77 6.36006E-03 3.13118E-02 0.00000E+00 4.41654E-04 +C 2 2.98699E-02 190.70 2.36313E-04 7.92257E-03 0.00000E+00 6.71255E-06 +BLANK card ending frequency cards +BLANK card ending "CABLE PARAMETERS" data subcases +BEGIN NEW DATA CASE +C 26th of 32 subcases of dcn29.dat +C 6th of 11 cases received from Prof. Ametani on October 28, 2003 +CABLE PARAMETERS +C ********************Case 21-1******************** +C Case 21-1; PT cable with 3-phase SC cable of core/sheath; IYG=3 + 3 -1 3 0 1 1 0 1 0 0 3 0 + 1.500 1.800 1.810 0.6000E-06 1.000 1.000 1.000 + 1.227 209.3 1.227 89.30 1.227 329.3 + 2 2 2 + 0.000 0.2550E-010.6050E-010.6200E-010.6700E-01 +0.2300E-07 1.000 1.000 2.400 0.3300E-07 1.000 1.000 2.400 +0.1500E-040.1000E-080.5000E-050.1000E-10 + 0.000 0.2550E-010.6050E-010.6200E-010.6700E-01 +0.2300E-07 1.000 1.000 2.400 0.3300E-07 1.000 1.000 2.400 +0.1500E-040.1000E-080.5000E-050.1000E-10 + 0.000 0.2550E-010.6050E-010.6200E-010.6700E-01 +0.2300E-07 1.000 1.000 2.400 0.3300E-07 1.000 1.000 2.400 +0.1500E-040.1000E-080.5000E-050.1000E-10 +0.2500E-040.1000E-09 + 5.000 0.000 + 50.0000 7000.00 0 0 0 +C Earth impedance ZE, in ohm/m +C 6.34866E-03 6.34866E-03 6.34866E-03 6.34866E-03 6.34866E-03 6.34866E-03 6.34866E-03 +C 3.12516E-02 3.12516E-02 3.12516E-02 3.12516E-02 3.12516E-02 3.12516E-02 3.12516E-02 Core 1 +C Conductor internal impedance ZC, in ohm/m +C 2.19370E-04 0.00000E+00 0.00000E+00 2.93876E-05 0.00000E+00 0.00000E+00 0.00000E+00 +C 8.63256E-03 0.00000E+00 0.00000E+00 7.78018E-04 0.00000E+00 0.00000E+00 0.00000E+00 Core 1 +C Total impedance [Zc], in ohm/m +C 6.64784E-03 6.36360E-03 6.36360E-03 6.45786E-03 6.36360E-03 6.36360E-03 6.36006E-03 +C 5.76283E-02 3.15489E-02 3.15489E-02 4.97737E-02 3.15489E-02 3.15489E-02 3.13118E-02 Core 1 +C Total admittance [Yc], in mho/m +C 1.50000E-05 1.26321E-22 -8.19740E-23 -1.50000E-05 3.31906E-23 -1.87770E-22 -1.55096E-22 +C 5.07794E-05 1.98652E-22 -2.40558E-22 -5.07794E-05 -6.61404E-22 -7.82202E-22 -5.78034E-22 Core 1 +C Characteristic impedance matrix [Zc] in phase variables, in [ohm]: +C 68.59111 8.717669 8.717669 56.51615 8.718023 8.718023 8.434837 +C 35.58146 -.307326 -.307326 33.96657 -.307396 -.307396 -.610079 +C Voltage transformation matrix [Tv]. This gives the mapping from modal to ph.. +C 1.0 1.0 -.693E-6 -.693E-6 .9992533 -.499625 -.99925 +C .237E-15 .257E-18 .7433E-6 .7432E-6 .1549E-3 -.708E-4 -.142E-3 +C Modal components +C Mode Attenuation Velocity Impedance (Ohm/m) Admittance (S/m) +C No. (db/km) (m/mic.s) Real Imag. Real Imag. +C 1 4.19527E+00 11.74 6.36006E-03 3.13118E-02 2.50000E-05 4.46053E-04 +C 2 8.82755E-01 69.19 1.51621E-04 7.91257E-03 1.53712E-05 5.00638E-05 +BLANK card ending frequency cards +BLANK card ending "CABLE PARAMETERS" data subcases +BEGIN NEW DATA CASE +C 27th of 32 subcases of dcn29.dat +C 7th of 11 cases received from Prof. Ametani on October 28, 2003 +CABLE PARAMETERS +C ********************Case 22-0******************** +C Case 22-0; PT cable with 3-phase SC cable of core/sheath/armor; IYG=0 + 3 -1 3 0 1 1 0 1 0 0 0 0 + 1.500 1.800 1.810 0.6000E-06 1.000 1.000 1.000 + 1.227 209.3 1.227 89.30 1.227 329.3 + 3 3 3 + 0.000 0.2550E-010.6050E-010.6200E-010.6700E-010.6900E-010.7400E-01 +0.2300E-07 1.000 1.000 2.400 0.3300E-07 1.000 1.000 2.400 +0.2000E-07 1.000 1.000 3.000 + 0.000 0.2550E-010.6050E-010.6200E-010.6700E-010.6900E-010.7400E-01 +0.2300E-07 1.000 1.000 2.400 0.3300E-07 1.000 1.000 2.400 +0.2000E-07 1.000 1.000 3.000 + 0.000 0.2550E-010.6050E-010.6200E-010.6700E-010.6900E-010.7400E-01 +0.2300E-07 1.000 1.000 2.400 0.3300E-07 1.000 1.000 2.400 +0.2000E-07 1.000 1.000 3.000 + 5.000 0.000 + 50.0000 7000.00 0 0 0 +C Total impedance [Zc], in ohm/m +C 6.75544E-03 6.36360E-03 6.36360E-03 6.56546E-03 6.36360E-03 6.36360E-03 6.48182E-03 6.36360E-03 6.36360E-03 6.36006E-03 +C 5.75112E-02 3.15489E-02 3.15489E-02 4.96567E-02 3.15489E-02 3.15489E-02 4.88070E-02 3.15489E-02 3.15489E-02 3.13118E-02 +C Total admittance [Yc], in mho/m +C 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 +C 6.79707E-06 -1.56470E-24 -1.58170E-24 -6.79707E-06 -3.60078E-23 -2.75936E-23 -1.91530E-20 0.00000E+00 0.00000E+00 -2.82146E-23 +C Characteristic impedance matrix [Zc] in phase variables, in [ohm]: +C 163.1724 10.06705 10.06705 129.181 10.06705 10.06705 125.815 10.06705 10.06705 8.462883 +C -1.83451 -.862715 -.862715 -1.4196 -.862711 -.862711 -1.25847 -.862723 -.862723 -.850805 +C Voltage transformation matrix [Tv]. This gives the mapping from modal to phase variables: v-phase = [Tv] * v-mode +C 1.0 -.316E-4 -.316E-4 .9287082 .9995322 -.216E-7 -.216E-7 -.499778 .9995556 .9995735 +C -.11E-13 -.387E-4 -.387E-4 .3563903 -.030584 -.12E-7 -.12E-7 .3265E-4 -.653E-4 -.626E-4 +C Modal components +C Mode Attenuation Velocity Impedance (Ohm/m) Admittance (S/m) Charact. imp. (Ohm) Charact. Admit. (S) +C No. (db/km) (m/mic.s) Real Imag. Real Imag. Real Imag. Real Imag. +C 1 3.26383E+00 11.77 6.36006E-03 3.13118E-02 0.00000E+00 4.41654E-04 8.463 -.851 1.16981E-01 1.17605E-02 +C 2 1.68391E-01 177.84 1.35154E-04 8.56765E-04 0.00000E+00 7.09500E-05 3.486 -.273 2.85132E-01 2.23515E-02 +BLANK card ending frequency cards +BLANK card ending "CABLE PARAMETERS" data subcases +BEGIN NEW DATA CASE +C 28th of 32 subcases of dcn29.dat +C 8th of 11 cases received from Prof. Ametani on October 28, 2003 +CABLE PARAMETERS +C ********************Case 22-1******************** +C Case 22-1; PT cable with 3-phase SC cable of core/sheath/armor; IYG=3 + 3 -1 3 0 1 1 0 1 0 0 3 0 + 1.500 1.800 1.810 0.6000E-06 1.000 1.000 1.000 + 1.227 209.3 1.227 89.30 1.227 329.3 + 3 3 3 + 0.000 0.2550E-010.6050E-010.6200E-010.6700E-010.6900E-010.7400E-01 +0.2300E-07 1.000 1.000 2.400 0.3300E-07 1.000 1.000 2.400 +0.2000E-07 1.000 1.000 3.000 +0.1500E-040.1000E-080.5000E-050.1000E-100.1000E-040.1000E-10 + 0.000 0.2550E-010.6050E-010.6200E-010.6700E-010.6900E-010.7400E-01 +0.2300E-07 1.000 1.000 2.400 0.3300E-07 1.000 1.000 2.400 +0.2000E-07 1.000 1.000 3.000 +0.1500E-040.1000E-080.5000E-050.1000E-100.1000E-040.1000E-10 + 0.000 0.2550E-010.6050E-010.6200E-010.6700E-010.6900E-010.7400E-01 +0.2300E-07 1.000 1.000 2.400 0.3300E-07 1.000 1.000 2.400 +0.2000E-07 1.000 1.000 3.000 +0.1500E-040.1000E-080.5000E-050.1000E-100.1000E-040.1000E-10 +0.2500E-040.1000E-09 + 5.000 0.000 + 50.0000 7000.00 0 0 0 +C Total impedance [Zc], in ohm/m +C 6.75544E-03 6.36360E-03 6.36360E-03 6.56546E-03 6.36360E-03 6.36360E-03 6.48182E-03 6.36360E-03 6.36360E-03 6.36006E-03 +C 5.75112E-02 3.15489E-02 3.15489E-02 4.96567E-02 3.15489E-02 3.15489E-02 4.88070E-02 3.15489E-02 3.15489E-02 3.13118E-02 +C End row for Core 1 +C Total admittance [Yc], in mho/m +C 1.50000E-05 -2.99182E-23 3.68773E-23 -1.50000E-05 2.46384E-22 -1.51477E-22 -1.31656E-21 1.65746E-22 -4.60119E-23 4.33856E-22 +C 5.07794E-05 -1.07249E-22 -1.21508E-22 -5.07794E-05 -4.26327E-22 1.67257E-22 -1.33777E-20 1.88659E-24 -1.48108E-24 -1.92794E-21 +C End row for Core 1 +C Characteristic impedance matrix [Zc] in phase variables, in [ohm]: +C 55.6716 8.633329 8.633329 43.58661 8.633334 8.633334 40.27627 8.633336 8.633336 8.434837 +C 27.58052 -.401215 -.401215 25.96715 -.401217 -.401217 26.05259 -.400898 -.400898 -.610079 +C Modal components +C Mode Attenuation Velocity Impedance (Ohm/m) Admittance (S/m) Charact. imp. (Ohm) Charact. Admit. (S) +C No. (db/km) (m/mic.s) Real Imag. Real Imag. Real Imag. Real Imag. +C 1 4.19527E+00 11.74 6.36006E-03 3.13118E-02 2.50000E-05 4.46053E-04 8.435 -.610 1.17939E-01 8.53035E-03 +C 2 8.82571E-01 69.19 1.29405E-04 7.89410E-03 1.55431E-05 5.01389E-05 12.140 1.737 8.07178E-02 -1.15484E-02 +BLANK card ending frequency cards +BLANK card ending "CABLE PARAMETERS" data subcases +BEGIN NEW DATA CASE +C 29th of 32 subcases of dcn29.dat +C 9th of 11 cases received from Prof. Ametani on October 28, 2003 +CABLE PARAMETERS +C ********************Case 3-0******************** +C Case 3-0; 3-phase SC cable; IYG=0 + 2 -1 3 0 1 1 0 0 0 0 0 0 + 2 2 2 + 0.000 0.2550E-010.6050E-010.6200E-010.6700E-01 +0.2300E-07 1.000 1.000 2.400 0.3300E-07 1.000 1.000 2.400 + 0.000 0.2550E-010.6050E-010.6200E-010.6700E-01 +0.2300E-07 1.000 1.000 2.400 0.3300E-07 1.000 1.000 2.400 + 0.000 0.2550E-010.6050E-010.6200E-010.6700E-01 +0.2300E-07 1.000 1.000 2.400 0.3300E-07 1.000 1.000 2.400 + 1.500 -.5000 2.500 0.000 1.500 0.5000 + 50.0000 7000.00 0 0 0 +C Total impedance [Zc], in ohm/m +C 6.82970E-03 6.53320E-03 6.60374E-03 6.63972E-03 6.53320E-03 6.60374E-03 +C 6.81573E-02 3.48863E-02 3.57482E-02 6.03027E-02 3.48863E-02 3.57482E-02 Core 1 +C Total admittance [Yc], in mho/m +C 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 +C 6.79707E-06 0.00000E+00 0.00000E+00 -6.79707E-06 0.00000E+00 0.00000E+00 Core 1 +C Characteristic impedance matrix [Zc] in phase variables, in [ohm]: +C 59.9583 7.709226 7.991493 26.01134 7.712748 7.995252 +C -1.53267 -1.03753 -1.05192 -1.04899 -1.03313 -1.0472 +C Voltage transformation matrix [Tv]. This gives the mapping from modal to phase variables: v-phase = [Tv] * v-mode +C 1.000179 -.497538 -1.00127 -1. -.496939 1.0 +C .151E-3 -.001074 -.001829 .1644E-3 -.135E-3 -.243E-3 +C Modal components +C Mode Attenuation Velocity Impedance (Ohm/m) Admittance (S/m) Charact. imp. (Ohm) Charact. Admit. (S) +C No. (db/km) (m/mic.s) Real Imag. Real Imag. Real Imag. Real Imag. +C 1 2.05949E+00 13.94 6.61292E-03 4.37438E-02 0.00000E+00 2.26225E-04 13.945 -1.048 7.13075E-02 5.35948E-03 +C 2 2.24102E-02 31.45 6.37941E-05 1.72881E-02 0.00000E+00 1.13112E-04 12.363 -.023 8.08872E-02 1.49239E-04 +BLANK card BLANK card ending "CABLE PARAMETERS" data subcases +BEGIN NEW DATA CASE +C 30th of 32 subcases of dcn29.dat +C 10th of 11 cases received from Prof. Ametani on October 28, 2003 +CABLE PARAMETERS +C ********************Case 3-1******************** +C Case 3-1; 3-phase SC cable; IYG=3 + 2 -1 3 0 1 1 0 0 0 0 3 0 + 2 2 2 + 0.000 0.2550E-010.6050E-010.6200E-010.6700E-01 +0.2300E-07 1.000 1.000 2.400 0.3300E-07 1.000 1.000 2.400 +0.1500E-040.1000E-080.5000E-050.1000E-10 + 0.000 0.2550E-010.6050E-010.6200E-010.6700E-01 +0.2300E-07 1.000 1.000 2.400 0.3300E-07 1.000 1.000 2.400 +0.1500E-040.1000E-080.5000E-050.1000E-10 + 0.000 0.2550E-010.6050E-010.6200E-010.6700E-01 +0.2300E-07 1.000 1.000 2.400 0.3300E-07 1.000 1.000 2.400 +0.1500E-040.1000E-080.5000E-050.1000E-10 + 1.500 -.5000 2.500 0.000 1.500 0.5000 + 50.0000 7000.00 0 0 0 +C Total impedance [Zc], in ohm/m +C 6.82970E-03 6.53320E-03 6.60374E-03 6.63972E-03 6.53320E-03 6.60374E-03 +C 6.81573E-02 3.48863E-02 3.57482E-02 6.03027E-02 3.48863E-02 3.57482E-02 Core 1 +C Total admittance [Yc], in mho/m +C 1.50000E-05 0.00000E+00 0.00000E+00 -1.50000E-05 0.00000E+00 0.00000E+00 +C 5.07794E-05 0.00000E+00 0.00000E+00 -5.07794E-05 0.00000E+00 0.00000E+00 Core 1 +C Characteristic impedance matrix [Zc] in phase variables, in [ohm]: +C 37.9946 7.710669 7.992328 25.92527 7.7129 7.994687 +C 1.38059 -.778858 -.783756 -.199009 -.775514 -.78019 +C Voltage transformation matrix [Tv]. This gives the mapping from modal to phase variables: v-phase = [Tv] * v-mode +C 1.000188 -.497735 1.001722 -1. -.496939 1.0 +C .3743E-3 -.00132 .002144 .581E-11 -.317E-3 0.0 +C Modal components +C Mode Attenuation Velocity Impedance (Ohm/m) Admittance (S/m) Charact. imp. (Ohm) Charact. Admit. (S) +C No. (db/km) (m/mic.s) Real Imag. Real Imag. Real Imag. Real Imag. +C 1 2.96821E+00 13.93 6.63137E-03 4.37410E-02 1.48430E-05 2.27545E-04 13.916 -.594 7.17279E-02 3.06180E-03 +C 2 4.22138E-01 31.35 7.11047E-05 1.72880E-02 7.42100E-06 1.13773E-04 12.308 .376 8.11714E-02 -2.47736E-03 +BLANK card ending frequency cards +BLANK card ending "CABLE PARAMETERS" data subcases +BEGIN NEW DATA CASE +C 31st of 32 subcases of dcn29.dat +C 11th of 11 cases received from Prof. Ametani on October 28, 2003 +CABLE PARAMETERS +C ********************Case 4******************** +C Case 4; same as 22-1 (default G,C are used if user does not provide input) + 3 -1 3 0 1 1 0 1 0 0 3 0 + 1.500 1.800 1.810 0.6000E-06 1.000 1.000 1.000 + 1.227 209.3 1.227 89.30 1.227 329.3 + 3 3 3 + 0.000 0.2550E-010.6050E-010.6200E-010.6700E-010.6900E-010.7400E-01 +0.2300E-07 1.000 1.000 2.400 0.3300E-07 1.000 1.000 2.400 +0.2000E-07 1.000 1.000 3.000 + 0.000 0.000 0.000 0.000 0.000 0.000 + 0.000 0.2550E-010.6050E-010.6200E-010.6700E-010.6900E-010.7400E-01 +0.2300E-07 1.000 1.000 2.400 0.3300E-07 1.000 1.000 2.400 +0.2000E-07 1.000 1.000 3.000 + 0.000 0.000 0.000 0.000 0.000 0.000 + 0.000 0.2550E-010.6050E-010.6200E-010.6700E-010.6900E-010.7400E-01 +0.2300E-07 1.000 1.000 2.400 0.3300E-07 1.000 1.000 2.400 +0.2000E-07 1.000 1.000 3.000 + 0.000 0.000 0.000 0.000 0.000 0.000 + 0.000 0.000 + 5.000 0.000 + 50.0000 7000.00 0 0 0 +C Earth impedance ZE, in ohm/m +C 6.34866E-03 6.34866E-03 6.34866E-03 6.34866E-03 6.34866E-03 6.34866E-03 6.34866E-03 6.34866E-03 6.34866E-03 6.34866E-03 +C 3.12516E-02 3.12516E-02 3.12516E-02 3.12516E-02 3.12516E-02 3.12516E-02 3.12516E-02 3.12516E-02 3.12516E-02 3.12516E-02 +C End row for Core 1 +C Conductor internal impedance ZC, in ohm/m +C 3.26963E-04 0.00000E+00 0.00000E+00 1.36981E-04 0.00000E+00 0.00000E+00 5.33464E-05 0.00000E+00 0.00000E+00 0.00000E+00 +C 9.38963E-03 0.00000E+00 0.00000E+00 1.53508E-03 0.00000E+00 0.00000E+00 6.85403E-04 0.00000E+00 0.00000E+00 0.00000E+00 +C End row for Core 1 +C Total impedance [Zc], in ohm/m +C 6.75544E-03 6.36360E-03 6.36360E-03 6.56546E-03 6.36360E-03 6.36360E-03 6.48182E-03 6.36360E-03 6.36360E-03 6.36006E-03 +C 5.75112E-02 3.15489E-02 3.15489E-02 4.96567E-02 3.15489E-02 3.15489E-02 4.88070E-02 3.15489E-02 3.15489E-02 3.13118E-02 +C End row for Core 1 +C Total admittance [Yc], in mho/m +C 1.00000E-10 1.18990E-27 -1.45189E-27 -1.00000E-10 -1.39444E-27 3.23117E-27 -6.46235E-27 3.23117E-27 0.00000E+00 0.00000E+00 +C 6.84105E-06 -2.97689E-24 -1.38659E-25 -6.84105E-06 -3.75253E-23 -2.73485E-23 -1.91530E-20 0.00000E+00 0.00000E+00 -2.82146E-23 +C End row for Core 1 +C Characteristic impedance matrix [Zc] in phase variables, in [ohm]: +C 161.2469 10.01258 10.01258 127.2717 10.01258 10.01258 123.8362 10.01259 10.01259 8.462462 +C .3295742 -.862266 -.862266 -1.3951 -.862271 -.862271 -1.24651 -.862266 -.862266 -.850762 +C Voltage transformation matrix [Tv]. This gives the mapping from modal to phase variables: v-phase = [Tv] * v-mode +C 1.0 -.249E-4 .9233616 .2931E-4 1.0 -.454E-7 -.454E-7 .9995507 .9995327 -.22E-12 +C .211E-17 -.351E-4 .3532771 .3409E-4 -.26E-17 -.298E-7 -.298E-7 -.638E-4 -.664E-4 -.29E-13 +C Modal components +C Mode Attenuation Velocity Impedance (Ohm/m) Admittance (S/m) Charact. imp. (Ohm) Charact. Admit. (S) +C No. (db/km) (m/mic.s) Real Imag. Real Imag. Real Imag. Real Imag. +C 1 3.26399E+00 11.77 6.36006E-03 3.13118E-02 1.00000E-10 4.41698E-04 8.462 -.851 1.16987E-01 1.17611E-02 +C 2 1.68468E-01 177.80 1.18406E-04 8.60287E-04 1.39772E-06 7.08880E-05 3.494 -.205 2.85250E-01 1.67149E-02 +BLANK card ending frequency cards +BLANK card ending "CABLE PARAMETERS" data subcases +BEGIN NEW DATA CASE +C 32nd of 32 subcases of dcn29.dat +C 15 January 2004, add simple data that illustrates output of Potential +C coefficient matrix and its transpose. This is done by using the snaking +C option (for SC cable, put -99 in cols. 36-40, which is CP variable NPP). +C Also, illustrate the single-line output that informs a user about matrix +C reduction: variable NGRND of 41-45 is set to 3, which is a request that +C three conductors (of the outer-most layer) will be grounded. IZFLAG of +C columns 26-30 had to be set ("1" is a request for intermediate printout), +C also, since the matrices in question are intermediate matrices, by CP +C defintion. Potential coefficient matrices are 6 x 6. After eliminating +C one, this gives 5 x 5 matrices. Tsu-huei Liu. +CABLE PARAMETERS + 2 -1 3 0 1 1 0 -99 3 0 0 0 + 2 2 2 + 0.0 23.30E-3 49.80E-3 51.00E-3 56.00E-3 + 1.724E-8 1.0 1.4 2.7 1.724E-8 1.0 1.0 2.5 + 0.0 23.30E-3 49.80E-3 51.00E-3 56.00E-3 + 1.724E-8 1.0 1.4 2.7 1.724E-8 1.0 1.0 2.5 + 0.0 23.30E-3 49.80E-3 51.00E-3 56.00E-3 + 1.724E-8 1.0 1.4 2.7 1.724E-8 1.0 1.0 2.5 + 2.500 0.0 2.730 0.0 2.960 0.0 + 100. 50.E03 +BLANK card ending frequency cards within CABLE PARAMETERS +BLANK card ending CABLE CONSTANTS data subcases +BEGIN NEW DATA CASE +BLANK + -- cgit v1.2.3