From b18347ffc9db9641e215995edea1c04c363b2bdf Mon Sep 17 00:00:00 2001 From: Angelo Rossi Date: Wed, 21 Jun 2023 12:04:16 +0000 Subject: Initial commit. --- benchmarks/dc35.dat | 159 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 159 insertions(+) create mode 100644 benchmarks/dc35.dat (limited to 'benchmarks/dc35.dat') diff --git a/benchmarks/dc35.dat b/benchmarks/dc35.dat new file mode 100644 index 0000000..37c3fe0 --- /dev/null +++ b/benchmarks/dc35.dat @@ -0,0 +1,159 @@ +BEGIN NEW DATA CASE +C BENCHMARK DC-35 +C U.M. test consisting of 3-phase induction motor startup. See Vol. X EMTP +C Memoranda, 15 April 1980, page TPIM-6 onward. TMAX has been decreased, +C DELTAT has been increased, and resistors shorting the rotor have been +C increased (to help lower-precision computers). Also appears in Rule Book. +PRINTED NUMBER WIDTH, 12, 2, { Request maximum precision (for 8 output columns) + .000400 .400 + 1 1 0 00 1 -1 0 + 5 5 20 20 100 100 +C The following 3 branches provide connectivity to ground: + 0 BUS-A0 1.0 + 0 BUS-B0 1.0 + 0 BUS-C0 1.0 +C Next comes the source impedance, as uncoupled series R-L branches: + 0BUS-A1BUS-A0 0.005 1.0 2 + 0BUS-B1BUS-B0BUS-A1BUS-A0 2 + 0BUS-C1BUS-C0BUS-A1BUS-A0 2 +C Next there is a near short of the rotor windings (squirrel cage case): + 0BUSRA1 1.E-5 + 0BUSRB1 1.E-5 + 0BUSRC1 1.E-5 +C Final branches are for rotor mass (capacitance) and damping (resistance): + 0BUS-OM 6.00E4 + 0 BUS-OM 33.333 1 +BLANK card terminating branch cards +BLANK card ends non-existent switch cards +14BUS-A0 180.0 60.0 0.0 +14BUS-B0 180.0 60.0 -120.0 +14BUS-C0 180.0 60.0 +120.0 +11BUS-OM-1 -6.00 +19 UM { 1st of U.M. data cards to represent 3-phase induction motor +0 +BLANK card ending Class-1 U.M. data + 4 1 1111BUS-OM 2 0.06 0.18850 { 1st machine table +0.0 0.020291 0 +0.0 0.020291 0 +0.063 0.0001911 BUS-A1 1 0.0 { 1st winding card +0.063 0.0003925 BUS-B1 1 0.0 +0.063 0.0003925 BUS-C1 1 0.0 +0.083 0.0003925 BUSRB1 1 0.0 +0.083 0.0003925 BUSRC1 1 0.0 +0.083 0.0003925 BUSRA1 1 0.0 +BLANK card ending all U.M. data +BLANK card ending electric network source cards + BUS-A1BUS-B1BUS-C1BUS-A0BUS-OM +C Step Time BUS-A1 BUS-B1 BUS-C1 BUS-A1 BUS-B1 +C BUS-A0 BUS-B0 BUS-C0 +C +C UM-1 UM-1 UM-1 UM-1 UM-1 +C TQGEN OMEGM THETAM IPA IPB +C 0 0.0 0.0 0.0 0.0 0.0 0.0 +C 0.0 0.0 0.0 0.0 0.0 +C 1 .4E-3 -98.574299 36.3155088 62.2587899 79.3830153 -29.245296 +C -.1388E-16 0.0 0.0 -19.695165 7.25584591 +C 2 .8E-3 -92.178447 20.8386935 71.3397538 79.6971707 -18.794915 +C -.00570624 0.0 0.0 -57.76825 18.6607698 +BLANK card ends requests for program output +C Last step begins: 1000 0.4 -8.3684481 1.39626098 6.97218715 171.631552 +C Last step begins: -12.310167 187.573334 46.3605875 -8.8049393 23.504665 +C Maxima begin: 99.6139318 106.19115 100.446912 171.631552 171.624746 +C Maxima begin: 144.878041 197.090289 46.3605875 302.2867 263.869636 +C Associated times : .0912 .0132 .0356 0.4 .3556 +C Associated times : .0388 .2492 0.4 .1284 .1508 +C Minima begin: -103.15511 -99.851577 -103.80211 -171.82882 -171.84501 +C Minima begin: -186.32292 -.41620944 -.58668E-3 -299.62596 -384.19564 +C Associated times : .016 .0716 .0104 .3584 .364 +C Associated times : .0116 .0028 .0052 .0368 .0088 +C 78901234567890123456789012345678901234567890123456789012345678901234567890 + 193.04 0.0 .40 UM-1 OMEGM Induction motor w in [rad/sec] + PRINTER PLOT { Now switch to the line printer (exactly the same plot card) + 193.04 0.0 .40 UM-1 OMEGM { Axis limits: (-0.004, 1.971) + 2Single-line, 78-character case title text ! + First of 2 lines of multi-line, 78-byte, subheading text. ! + Second and final line of multi-line labeling text. ! + CALCOMP PLOT + 193.04 0.0 .40 UM-1 IPA + PEN PLOT { Divert vector graphics from screen to disk for printer + QUARTER PLOT { Blank col 32 means all 4 quarters of quarter plotting is used + 2Single-line case-title text for 1st of 4 quarters! + 193.04 0.0 .40 UM-1 OMEGM 1st of 4 quarterw in [rad/sec] ! + 2Single-line case-title text for 2nd of 4 quarters! + 193.04 0.0 .40 UM-1 THETAM 2nd of 4 quarterAngle in radian! + 2Single-line case-title text for 3rd of 4 quarters! + 193.04 0.0 .40 UM-1 TQGEN 3rd of 4 quarterTorque in n-m ! + 2Single-line case-title text for 4th of 4 quarters! + 193.04 0.0 .40 UM-1 IPA 4th of 4 quarterCurrent in amp ! + SCREEN PLOT + 2Done with QUARTER PLOT; back to full size! + 193.04 0.0 .40 UM-1 IPB +BLANK card ends the last plot card +BEGIN NEW DATA CASE +BLANK + + + +BEGIN NEW DATA CASE +C 2nd of 2 subcases has the same data as the 1st, but is used to illustrate +C CALCOMP PLOT usage only. Both SCREEN PLOT and PEN PLOT usage of the +C Salford DOS extender motivated the addition of this data in Sept, 1990. +PRINTED NUMBER WIDTH, 12, 2, { Request maximum precision (for 8 output columns) + .000400 .040 { Note the reduction from 1000 to 100 time steps for speed + 1 1 0 00 0 -1 0 + 5 5 20 20 +C The following 3 branches provide connectivity to ground: + 0 BUS-A0 1.0 + 0 BUS-B0 1.0 + 0 BUS-C0 1.0 +C Next comes the source impedance, as uncoupled series R-L branches: + 0BUS-A1BUS-A0 0.005 1.0 2 + 0BUS-B1BUS-B0BUS-A1BUS-A0 2 + 0BUS-C1BUS-C0BUS-A1BUS-A0 2 +C Next there is a near short of the rotor windings (squirrel cage case): + 0BUSRA1 1.E-5 + 0BUSRB1 1.E-5 + 0BUSRC1 1.E-5 +C Final branches are for rotor mass (capacitance) and damping (resistance): + 0BUS-OM 6.00E4 + 0 BUS-OM 33.333 1 +BLANK card terminating branch cards +BLANK card ends non-existent switch cards +14BUS-A0 180.0 60.0 0.0 +14BUS-B0 180.0 60.0 -120.0 +14BUS-C0 180.0 60.0 +120.0 +11BUS-OM-1 -6.00 +19 UM { 1st of U.M. data cards to represent 3-phase induction motor +0 +BLANK card ending Class-1 U.M. data + 4 1 1111BUS-OM 2 0.06 0.18850 { 1st machine table +0.0 0.020291 0 +0.0 0.020291 0 +0.063 0.0001911 BUS-A1 1 0.0 { 1st winding card +0.063 0.0003925 BUS-B1 1 0.0 +0.063 0.0003925 BUS-C1 1 0.0 +0.083 0.0003925 BUSRB1 1 0.0 +0.083 0.0003925 BUSRC1 1 0.0 +0.083 0.0003925 BUSRA1 1 0.0 +BLANK card ending all U.M. data +BLANK card ending electric network source cards + BUS-A1BUS-B1BUS-C1BUS-A0BUS-OM +BLANK card ends requests for program output + 2Single-line, 78-character case title text ! + First of 2 lines of multi-line, 78-byte, subheading text. ! + Second and final line of multi-line labeling text. ! + 194 4. 0.0 40. UM-1 OMEGM Induction motor w in [rad/sec] ! + PEN PLOT { Now switch to the Epson printer (exactly the same plot card) + 2Single-line, 78-character case title text ! + First of 2 lines of multi-line, 78-byte, subheading text. ! + Second and final line of multi-line labeling text. ! + 194 4. 0.0 40. UM-1 OMEGM Induction motor w in [rad/sec] ! + SCREEN PLOT + First of 2 lines --- text is altered, though. ! + Second 2 lines --- text is altered. ! + 194 4. 0.0 40. UM-1 OMEGM Induction motor w in [rad/sec] ! +BLANK card ends the last plot card +BEGIN NEW DATA CASE +BLANK + + -- cgit v1.2.3