From b18347ffc9db9641e215995edea1c04c363b2bdf Mon Sep 17 00:00:00 2001 From: Angelo Rossi Date: Wed, 21 Jun 2023 12:04:16 +0000 Subject: Initial commit. --- benchmarks/dc17ains.dat | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 benchmarks/dc17ains.dat (limited to 'benchmarks/dc17ains.dat') diff --git a/benchmarks/dc17ains.dat b/benchmarks/dc17ains.dat new file mode 100644 index 0000000..f529777 --- /dev/null +++ b/benchmarks/dc17ains.dat @@ -0,0 +1,22 @@ +/SOURCE +14WHITE 1.02 60. 0.0 -1. +/BRANCH + WHITE YELLOW .05 .20 + YELLOWGREEN .05 .20 + GREEN RED .05 .20 + RED BLUE .10 .40 +/LOAD FLOW +C Next come power constraints of the load flow. There will be one +C for each non-slack generator: + RED -0.4 -.14 .85 1.15 + GREEN 1.0 0.3 .85 1.15 + BLUE -.15 .025 .85 1.15 + YELLOW -0.6 -0.2 .85 1.15 +C The following load-flow miscellaneous data card has two peculiarities. The +C use of VSCALE = 1.414 is the special flag requesting RMS rather than peak +C voltages. The use of KTAPER = 0 ensures constant acceleration factors +C (this works for this data). +C NNNOUT NITERA NFLOUT NPRINT RALCHK CFITEV CFITEA VSCALE KTAPER + 1 500 20 1 .00001 0.1 7.0 1.414 0 +/REQUEST +FIX SOURCE { An EMTP load flow will satisfy requested phasor power injections. -- cgit v1.2.3